24-Port 10/100Mbps + 2-Port Gigabit Unmanaged PoE+ Switch
- 24× PoE+ 10/100 Mbps RJ45 ports, 2× Gigabit RJ45 ports, and 2× combo Gigabit SFP slots.
- High PoE power budget with up to 30 W for each PoE port and 250 W for all PoE ports.*
- Up to 250 m data and power PoE transmission range under Extend Mode**, ideal for surveillance system.
- Priority Mode ensures high priority of ports 1–8 to guarantees the quality of sensitive applications like video monitor.
- Isolation Mode allows one-click client traffic separation for higher security and performance.
- PoE Auto Recovery guarantees stable operation of PoE devices by automatically rebooting the dropped or unresponsive PD devices.
- Plug and play, with no configuration and installation needed
Dedicated 24-Port PoE+ Switch for Wide Range of Applications with 250 W PoE Budget
Compliance with the 802.3af/at PoE+ standard supports up to 30 W on each PoE port. The total 250 W PoE power budget* for the 24× PoE ports makes it has wide range of applications, such as surveillance, offices, dormitories, and small businesses. It is fully compatible with IP cameras, access points, IP phones, computers, printers, and etc.
Total 250 W Power Budget
Dedicated Design for IP Surveillance —Up to 250 m Transmission
With extend mode, the PoE transmission distance reaches up to 250 m*—perfect for IP Camera deployment in large areas.
*The speed of the ports in extend mode will downgrade to 10 Mbps. Actual transmission distance may vary due to cable quality.
Dedicated Design for IP Surveillance —Higher Performance and Security
Priority Mode and Isolation Mode make surveillance smoother and safer.
-
Priority Mode
ButtonPriority Video Quality Guaranteed
Quality of sensitive applications like video monitoring in critical business areas is guaranteed by offering higher priority options for ports 1–8 when one-touch Priority Mode is on.
-
Isolation Mode
ButtonOne-Click Traffic Separation for Ports 1-24
With one click, Isolation Mode easily divides traffic for ports 1–24 to avoid snooping and tampering. This enables the switch to isolate broadcast storm, improving LAN security and data transmission.
System Self-Healing
with PoE Auto Recovery
The switch automatically detects and reboots the PD devices, such as cameras and APs, when they fall offline or go unresponsive, guaranteeing the stable operation of PoE-connected devices, without need for manual monitoring and restart.
PoE Auto Recovery
IP Camera
IP Camera
PoE
Auto
Recovery
Power overload
250 W
Intelligent Power Management to Prevent Power Overload
When your total power consumption exceeds 250 W, Intelligent Power Management automatically cuts lower priority ports’ power to ensure high-priority ports’ power supply. This protects the device from power overload operation. It also automatically detects the required PoE power for your device and protects your non-PoE equipment from being damaged.
Smooth HD Video Monitoring
2× gigabit RJ45 ports and 2× combo gigabit SFP ports ensure smooth streaming even when 24× HD IP cameras work simultaneously.
SFP Ports
Plug and Play
-
Plug In
-
Connect Devices
Internet
IP Phone
IP Camera
Access Point
TL-SL1226P
-
Enjoy
Related Cases
-
Little Footprints Preschool
VIGI Builds High-Performance Video Surveillance for Little Footprints Preschool in Singapore.
Little Footprints Preschool
VIGI Builds High-Performance Video Surveillance for Little Footprints Preschool in Singapore.
-
Trigo Hotel KL
VIGI Provides a Professional and Efficient Video Surveillance & Network Connection Solution for Trigo Hotel KL in Malaysia.
Trigo Hotel KL
VIGI Provides a Professional and Efficient Video Surveillance & Network Connection Solution for Trigo Hotel KL in Malaysia.
HARDWARE FEATURES | |
---|---|
Interface | |
Network Media | |
Fan Quantity | 2 Fans |
Physical Security Lock | Yes |
Power Supply | 100-240 VAC, 50/60 Hz |
Packet Forwarding Rate | 6.54 Mpps |
PoE+ Ports(RJ45) | |
Mac Address Table | 16 K |
Jumbo Frame | 16 KB |
Switching Capacity | 8.8 Gbps |
Dimensions ( W x D x H ) | 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) |
Max Power Consumption | 14.81 W (220/50 Hz. no PD connected)302.88 W (220/50 Hz. with 250 W PD connected) |
Max Heat Dissipation | 50.35 BTU/h (no PD connected)1029.79 BTU/h (with 250 W PD connected) |
SOFTWARE FEATURES | |
---|---|
Advanced Features | |
Transmission Method | Store-And-Forward |
OTHERS | |
---|---|
Certification | CE, FCC, RoHS |
Package Contents | |
Environment |
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
**The speed of the ports which are under extend mode will be downgraded to 10 Mbps. Actual transmission distance may vary from the quality of the cables.