How to set up IPv6 service for Cable ISP on the wireless router

User Application Requirement
Updated 09-06-2022 02:48:47 AM 161316
This Article Applies to: 

Note: Please make sure that you are provided IPv6 internet service by your internet provider, If not, please contact your IPv6 internet provider first.

Your ISP should have provided the following information:

PPPoE, Dynamic IP (SLAAC/DHCPv6), Pass-Through (Bridge), and Static IP.

1. Log in to the web-based interface of the router. If you don’t know how to do that, please refer to

How do I log into the web-based Utility (Management Page) of the TP-Link wireless router?

2. Go to Advanced > IPv6.

3. Enable IPv6.

4. Select Dynamic IP(SLAAC/DHCPv6).

5. Go to Advanced settings, Select Auto in “Get IPv6 Address”. Select Enable in “Prefix Delegation”.

6. Click Save.

To get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Byla tato FAQ užitečná?

Vaše zpětná vazba nám pomůže zlepšit naše webové stránky

Recommend Products

From United States?

Get products, events and services for your region.