Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
This article will guide you on how to set up static routing on the Deco app.
Step 1 Launch the Deco app and log in to the TP-Link account that is bound to Deco.
Step 2 Go to More > Advanced > Static Routing.
Step 3 Click + and finish the settings according to the following explanations:
-Description: Specify a description for the routing entry.
-Network Destination: The Network Destination is the address of the network or host that you want to assign to a static route.
-Subnet Mask: The Subnet Mask divides the network portion and the host portion of an lP address.
-Default Gateway: This is the lP address of the default gateway device that allowing for the contact between the Router and the network or host.
-Interface: Select the interface to specify the type of the Network Destination.
Step 4 Click Save. You can find the entry you’ve set, the static routing is set successfully.
Byla tato FAQ užitečná?
Vaše zpětná vazba nám pomůže zlepšit naše webové stránky
40353 
_Overview_normal_20230323091138k.png)
