What Should I do if the Main Brush of My Robot Vacuum Gets Stuck?

Troubleshooting
Updated 11-15-2022 03:06:09 AM 20062
This Article Applies to: 

The main brush is the main tool for cleaning the Robot Vacuum, which can clean the dust that is difficult to clean.

If the main brush gets stuck, please try the following troubleshooting steps:

1. Please turn the Robot Vacuum over to check if there are foreign matters in the main brush.

2. If there are foreign matters in the main brush, please remove the main brush and clean it following the steps below:

1) Turn the Robot Vacuum over, then unlatch and remove the main brush cover.

2) Remove the brush and its end cap.

3) Remove any foreign matter with the cleaning brush.

3. Clean the connection between the main brush and the Robot Vacuum.

4. Re-install the cap and main brush. Press on the main brush cover to lock it in place.

If the issue persists, please Contact Support.

Byla tato FAQ užitečná?

Vaše zpětná vazba nám pomůže zlepšit naše webové stránky

Recommend Products

From United States?

Get products, events and services for your region.