Switches for Surveillance
Switches for Business WiFi
Wireless Networking for Elevators
Omada Cloud Software Defined Networking (SDN)
Omada’s Software Defined Networking (SDN) platform integrates network devices, including access points, switches and gateways, providing 100% centralized cloud management. Omada creates a highly scalable network—all controlled from a single interface. Seamless wireless and wired connections are provided, ideal for use in hospitality, education, retail, offices, and more.
Omada WiFi 6 (802.11ax)
Need to deploy stable Wi-Fi in high-density environment? Try Omada Wi-Fi 6 technology!
Omada Wi-Fi 6 access points greatly improve experiences in high-density environments, and provides faster speed and greater range for more devices.
WPA3, the Newest Security Protocol
Want to enhance the network security in public WiFi and home WiFi? Try TP-Link WPA3 technology!
To maximum the safety of enterprise and your home WiFi, TP-Link is inserting WPA3, the latest encryption technology, into Omada access points, WiFi routers, range extenders, and more devices.
Pharos Long-Range Wireless
Need to transmit network to long range or remote areas? Try Pharos wireless solution!
Pharos is TP-Link's next-generation outdoor product series, providing long-range outdoor wireless networking solutions for applications such as WISP, Enterprise Bridge (P2P), and Wireless Surveillance (PtMP).
Worried about buffering when using outdoor wireless broadband? Try TP-Link MAXtream technology!
MAXtream, the breakthrough TDMA technology, makes outdoor AP smoother and produces more efficient communications.
Facing the annoying latency when multiple devices connected? Try TP-Link MU-MIMO technology!
MU-MIMO solves this problem by creating multiple simultaneous connections to serve several users with multiple data streams at the same time.
Power over Ethernet (PoE)
Need to deploy your surveillance cameras in your farm? Try TP-Link PoE technology to transmit power and data through one single Ethernet cable.
LiteWave Unmanaged Switches
Need to work at home or expand your wired connections? Try TP-Link LiteWave Switches!
The TP-Link LiteWave Unmanaged Switches provide the simplest and most affordable way to expand your wired network. Just plug and play!
JetStream 10G Smart Switches
Provide high levels of performance, scalability, and cost-effectiveness that SMBs require from their 10G networking solutions.
Learn MoreBecome a Partner
Training & Certification
Learn MoreStart Training
Find the Stories
Replacement & Warranty
GPL Code Center
>How to find the hardware version on a TP-Link device
The EAP Controller is used to manage multiple EAPs intensively.
If you are planning to upgrade to this version from an old Controller (V3.2.10 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.
If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the: Omada Controller Upgrade Guide
Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Omada Discovery Utility_v2.0.0_Mac
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
Fix the bug that searching in the search box will cause the software to hang.
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.
This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps:
Step 1. Log in to the Controller
Step 2. Adopt Devices
Step 3. View Dashboard and Menus
Step 4. Set up WAN
Step 5. Set up LAN and VLANs
Step 6. Set up Wi-Fi
Step 7. Set up ACL
This video demonstrates how to manage TP-Link EAPs centrally via the Software Controller. The setup consists of three steps:
• Install the Software
• Configure Discovery Utility (If your EAPs and the Controller Host are on different subnets)
• Configure Software Controller
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Software Controller
• Mass EAPs (usually more than three)
This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
• Connect the EAP to the network
• Download the Omada APP
• Connect to the EAP's wireless network
• Set up the EAP using the Omada APP
THIS VIDEO APPLIES TO:
• All TP-Link EAP models. (except EAP120 and EAP220)
• A small number (1-3) of EAPs.
You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Controller Software (version 3.0.2 or above)
• Mass EAPs (usually more than three)
This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
Here are 3 most common scenarios and their corresponding methods:
• Manage 1 or 2 EAPs locally
• Manage 3 or more EAPs locally
• Manage 3 or more EAPs remotely
When choosing the method, consider the following questions:
1. Standalone Mode or Controller Mode?
2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
3. What kind of user interface will you use, a web browser or the Omada app?
This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
1. Connect the EAP to the network
2. Log into the EAP (via a wired/wireless connection)
3. Change the default SSID
This video is suitable for users with a small number (1-3) of EAPs .
Q&A of functional explanation or specification parametersConfiguration GuideUser Application RequirementFurther AssistanceTroubleshooting
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
EAP225-Wall(EU)_V2_5.0.3 Build 20210604
Please upgrade firmware/software from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it may cause upgrade failure or mistakes and be against the warranty.
This firmware fully adapts the Omada SDN platform but only compatible with Omada Controller v4.1.5 or above.
If you are using an old Omada controller and plan to upgrade this firmware for EAP, you must upgrade the Omada Controller as well: Upgrade Guide
EAP225-Wall(EU)_V2_5.0.2 Build 20210316
EAP225-Wall(EU)_V2_1.20.0 Build 20200422
This firmware is fully adapted Omada SDN platform but only compatible with Omada controller v4.1.5 or above.
If you are using old Omada controller and plan to upgrade firmware for EAP, then you must upgrade Omada controller as well, and please follow Upgrade Guide to upgrade Omada controller.
If your EAP is working standalone, please note that the EAP will be reset after upgrading to this firmware and you need to re-configure your EAP.
EAP225-Wall(EU)_V2_1.4.0 Build 20191213
Recommended Controller Software Version: Omada Controller v3.2.6 or above
EAP225-Wall(EU)_V2_1.3.1 Build 20191022
Recommended Controller Software Version: Omada Controller v3.2.x or above
EAP225-Wall(EU)_V2_1.3.0 Build 20190722
1. Change the OpenSSL version to 1.0.2q.
2. Optimize UI, including character optimization and display error correction.
1. Fixed the bug that client devices can pass the portal authentication after disconnected from the Controller.
2. Fixed the bug that untag packets can be transferred to SSIDs with different VLANs.
5. Fixed the bug that some EAPs may disconnect from the Omada Controller in large scale network.
6. Fixed the bug that the management page may not be accessed after EAP is disconnected from the Controller.
7. Fixed the bug that when APs are disconnected from Controller, the rate limit configuration will be not issued to these APs after they are back to connected again.
8. Fixed the bug that when the time of EAP is synchronized with PC, it will be the same as PC's time not considering different time zones.
9. Fixed the bug that packets with VLAN tag can be forwarded to the SSID without wireless VLAN setting.
1. For EAP225-Wall v2 only.
2. Your device's configuration won't be lost after upgrading.
3. This version of firmware is applied to Omada APP of version 2.1.X or above.
EAP225-Wall(EU)_V2_1.1.0 Build 20181122
Recommended Controller Software Version: Omada Controller v3.0.x or above
1. Add Band Steering/LED Locate/Client rate limit/SSID rate limit Function in Standalone mode.
2. The SSID isolation function is promoted to the Guest Network Function. Wireless Clients connected with Guest SSID can’t communicate with each other and the local network.
3. Change the HTTP port of Portal authentication page from 80 to 22080 in standalone mode.
4. Add More Client Detail Log in standalone mode.
5. UI optimization.
1. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when Omada Controller and Omada EAP belong to different subnet.
2. Fixed the bug that HTTPS redirection of Portal authentication page will be inoperative when the IP address of Omada EAP and wireless clients belong to different subnet.
3. Fixed the bug that when we change the IP in standalone mode, the portal authentication page may not pop up successfully.
4. Fixed the bug that the wireless clients may not be redirected to portal authentication page by surfing HTTPS website if we enable Management VLAN function.
5. Fixed the bug that wireless clients connected with 2.4G SSID of EAP may receive broadcast packets from other VLAN.
6. Fixed the bug that the rate limit of Portal function may not take effect sometimes.
7. Fixed the bug that we may not login to the https web management page of EAP in standalone mode on MacBook.
EAP225-Wall(EU)_V2_1.0.0 Build 20180418
Recommended Controller Software Version: Omada Controller v 2.6.x or above
First firmware released for EAP225-Wall(EU)_V2
2. Your device's configuration won't be lost after upgrading
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.
Note: To use Omada, please update your EAP's firmware to the latest version.
EAP AdoptionFacebook portal authenticationManagementStandalone EAP Log in Edit SSIDEAP reset backup and restore firmware update system time user accountConfigurationConfiguration ExampleQuick Start
From United States?
Get products, events and services for your region.
These cookies are necessary for the website to function and cannot be deactivated in your systems.
accepted_local_switcher, tp_privacy_base, tp_privacy_marketing, tp_smb-select-product_scence, tp_smb-select-product_scenceSimple, tp_smb-select-product_userChoice, tp_smb-select-product_userChoiceSimple, tp_smb-select-product_userInfo, tp_smb-select-product_userInfoSimple, tp_top-banner, tp_popup-right-middle, tp_popup-right-bottom
__livechat, __lc2_cid, __lc2_cst, __lc_cid, __lc_cst, CASID
VISITOR_INFO1_LIVE, YSC, LOGIN_INFO, PREF, CONSENT, __Secure-3PSID, __Secure-3PAPISID, __Secure-3PSIDCC
Analysis and Marketing Cookies
Analysis cookies enable us to analyze your activities on our website in order to improve and adapt the functionality of our website.
The marketing cookies can be set through our website by our advertising partners in order to create a profile of your interests and to show you relevant advertisements on other websites.
Google Analytics & Google Tag Manager & Google Optimize
_gid, _gat, _gat_global, _ga, _gaexp
Google Ads & DoubleClick
NID, IDE, test_cookie, id, 1P_JAR
fr, spin, xs, datr, c_user, sb, _fbp
_ce.s, _CEFT, _gid, cean, _fbp, ceac, _drip_client_9574608, cean_asoc
_hjKB, _fbp, ajs_user_id, _BEAMER_LAST_UPDATE_zeKLgqli17986, _hjid, _gcl_au, _ga, ajs_anonymous_id, _BEAMER_USER_ID_zeKLgqli17986, _hjAbsoluteSessionInProgress, _hjFirstSeen, _hjIncludedInPageviewSample, _hjTLDTest
lms_analytics, AnalyticsSyncHistory, _gcl_au, liap