Setup Video

  • How to turn a router into an Access Point?

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  •  Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally V1.x=V1)
    How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • Do NOT upgrade the firmware through wireless connection unless there is no LAN/Ethernet port on the TP-link device. For LTE-MiFi, it is recommended to upgrade via USB port.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
TD-W8950N_V1_160203
Published Date: 2016-02-03 Language: English File Size: 5.93 MB

Modifications and Bug Fixes:

New features/Enhancement:
  1. Added switch for TR69 enable/disable.
  2. Added Arp Binding function(Advanced -->Security-->ARP Binding).
  3. Increased the Pre_share key length from 15 to 255 in IPsec VPN.
  4. Added Firewall switch in ppp connection.
  5. Added Iran in wireless country option.
Bug Fixed:
  1. Fixed the bug when setting PPPoE\L2TP\PPTP password with 31 special characters in Quick Setup ,the WAN configuration shows
  2. Fixed the bug that guest network  page is incomplete within Google Chrome
  3. Fixed the bug that  URLs are limited to 10 in URL filter of parental control
  4.Fixed the bug with DDNS updating

Notes:

1. For TD-W89950N(UN)_V1
2. Your device’s configuration won't be lost after upgrading,which means you needn't to configure your device again after upgrading
TD-W8950N_V1_150205
Published Date: 2015-02-05 Language: English File Size: 5.77 MB

Modifications and Bug Fixes:

Bug Fixed:
1.Fixed the bug that IP address couldn't be saved in the IP filter when using IP+Mask format.
2.Fixed the bug that wireless is not available after reboot when wireless schedule was enabled.
3.Fixed the bug that DDNS account couldn't be saved when the password contained '#'.
4.Fixed the bug that when the main nework was disabled ,the guest network still shown wrongly as enabled.
5.Fixed the bug that in some applications DNS will work improperly.
6.Fixed the bug that the router will not dial up again when PPPoE authentication failed.
7.Fixed the bug that the wireless in Quick Setup will automatic disabled after 10mins.When enable it,the SSID is empty and not encrypted.
8.Fixed the bug that the router doesn't limit the unsupported characters in DDNS domain name.
9.Fixed the bug that bandwidth control of Guest network could not take effect.
10.Fixed the bug that the router would forward the packets to other LAN ports which were supposed to forward to the WLAN. 

Notes:

1. For TD-W8950N V1
2. Old firmware’s configuration file can be imported into this new firmware.
3. Your device’s configuration won't be lost after upgrading, which means you needn't to configure your device again after upgrading. 
TD-W8950N_V1_140106
Published Date: 2014-01-06 Language: English File Size: 5.81 MB

Modifications and Bug Fixes:

  1. First firmware for TD-W8950N V1

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

GPL Code

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: