How to set up System Time of the Wi-Fi Routers (new logo)?

System time is the time displayed while the router is running. The system time you configure here will be used for other time-based functions like Parental Controls. You can choose the way to obtain the system time as needed.

1. Log in to the web-based interface of the router. If you don’t know how to do that, please refer to

a. How to log in to the web-based interface of Wi-Fi Routers (new logo)?

b. How to log in to the web-based interface of Wi-Fi Routers (new logo)?

2. Go to Advanced > System Tools > Time Settings.

A. To get time from the internet:

1. In the Set Time field, select Get automatically from the Internet.

2. Select your local Time Zone from the drop-down list.

3. In the NTP Server I field, enter the IP address or domain name of your desired NTP Server.

4. (Optional) In the NTP Server II field, enter the IP address or domain name of the second NTP Server.

5. Click Obtain to get the current Internet time and click Save.

B To manually set the date and time:

1. In the Set Time field, select Manually.

2. Set the current Date (In MM/DD/YYYY format).

3. Set the current Time (In HH/MM/SS format).

4. Click Save.

C To set up Daylight Saving Time:

1. Select Enable Daylight Saving Time.

2. Select the correct Start date and time when daylight saving time starts at your local time zone.

3. Select the correct End date and time when daylight saving time ends at your local time zone.

4. Click Save.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

This Article Applies to:
TL-WR1043N( V5 ) , Archer C3150( V2 ) , Archer C60( V2 )
Configuration Guide | Updated 03-27-2017 09:04:50 AM