How Do I Use VPN Client to Access a Remote VPN Server
The VPN Client feature of TP-Link routers allows devices in your home network to access remote VPN servers, without the need to install VPN software on each device.
To use the VPN Client feature, simply configure a VPN connection and choose your desired devices on your router, then these devices can access the remote VPN server. Please follow the steps below:
1.Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
2.Go to Advanced > VPN Client.
3.Enable VPN Client, then save the settings.
4.Add VPN servers, and enable the ones you need.
a. In the Server List section, click Add.
b. Specify a description for the VPN and choose the VPN type.
c. Enter the VPN information provided by your VPN provider.
- OpenVPN: Enter the VPN username and password if required by your VPN provider, otherwise simply leave them empty. Then import the configuration file (less than 8 KB) provided by your VPN provider.
- PPTP: Enter the VPN server address (for example 220.127.116.11) and the VPN username and password provided by your VPN provider.
- L2TP/IPSec VPN: Enter the VPN server address (for example 18.104.22.168), VPN username and password, and IPSec pre-shared key provided by your VPN provider.
d. Save the settings.
e. In the server list, enable the one you need.
5. Add and manage the devices that will use the VPN function.
a. In the Device List section, click Add.
b. Choose and add the devices that will access the VPN server you have configured.
6. Save the settings.
Done! Now the devices you specified can access the VPN server you enabled.
Your feedback helps improve this site.