How to discover and manage devices using VIGI Config Tool

Configuration Guide

อัปเดตแล้ว06-06-2025 21:13:09 PM Number of views for this article

Number of views for this article

10971

บทความนี้ใช้กับ:

Contents

Single device management

Batch device management

Objective

This article describes how to discover and manage devices using the VIGI Config Tool.

Requirements

VIGI Config Tool
VIGI Camera and VIGI NVR

Introduction

You can use the VIGI Config Tool to discover and manage devices in the same local network.

Configuration

Single device management

Step 1. Double-click the icon to launch VIGI Config Tool.

Step 2. Click Refresh to discover devices automatically. Click the lock icon and enter the device passcode to verify the device.

The Device List interface in VIGI Config Tool.

Batch device management

Step 1. Double-click the icon to launch VIGI Config Tool.

Step 2. Select the desired devices. Click Batch Action for batch device management.

The location of Batch Action in VIGI Config Tool.

Verification

Check the status of the device. When the status changes to Online, the operation is successful.

The location of Batch Action in VIGI Config Tool.

Conclusion

You can now manage the devices using the VIGI Config Tool.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

คำถามที่พบบ่อยนี้มีประโยชน์หรือไม่?

ความคิดเห็นของคุณช่วยปรับปรุงเว็บไซต์นี้

จาก United States?

รับผลิตภัณฑ์ กิจกรรม และบริการสำหรับภูมิภาคของคุณ

ไป ตัวเลือกอื่น ๆ