Download pentru TL-SG3428
- Documente
Firmware
O actualizare firmware poate rezolva problemele pe care versiunea anterioară a firmware-ului le poate avea și îmbunătăţeşte performanțele curente.
Pentru Actualizare
IMPORTANT: Pentru a preveni o actualizare efectuată greşit, te rugăm să citeşti procesul de actualizare, înainte de a continua.
- Verifică versiunea hardware a dispozitivului pentru versiunea de firmware corespunzătoare. O actualizare de firmware greșită poate duce la deteriorarea dispozitivului și anularea garanției. (În mod normal, v1.x = V1) Cum pot afla versiunea hardware a unui dispozitiv TP-Link?
- NU actualiza firmware-ul care nu este pentru regiunea ta. Apăsă aici pentru a alege regiunea și descărcă versiunea de firmware cea mai potrivită. (De exemplu. Firmware-ul UE și US sunt pentru diferite versiuni hardware)
- NU opri alimentarea dispozitivului în timpul procesului de actualizare, deoarece poate provoca deteriorarea permanentă a produsului.
- NU efectua procedura de upgrade firmware prin conexiune wireless cu excepția cazului în care dispozitivul TP-Link are doar conexiune wireless.
- Este recomandat să opreşti toate aplicațiile cu acces la Internet de pe computer, sau pur și simplu deconectați Internet-ul de la dispozitiv înainte de actualizare.
- Utilizează un software de decompresie WinZIP sau WinRAR pentru a extrage fișierul descărcat, înainte de actualizare.
TL-SG3428(UN)_V1_20200729 | |||
---|---|---|---|
Data publicării: 2020-09-15 | Limba: Engleză | Dimensiune Fişier: 8.64 MB | |
|
Utilizarea versiunilor firmware terțe în produsele TP-Link
Anumite versiuni de firmware pentru produsele TP-Link pot fi înlocuite cu versiuni firmware dezvoltate de terțe părți, de exemplu DD-WRT. TP-Link nu oferă suport tehnic și nu garantează performanța și stabilitatea versiunilor de firmware dezvoltate de terțe părți. Defecțiunile produselor cauzate de utilizarea unui firmware dezvoltat de o terță parte conduce la pierderea garanției.
Cod open source pentru programatori (GPL)
Următoarele informații sunt pentru programatori și nu sunt necesare pentru majoritatea utilizatorilor casnici TP-Link.
Produsele TP-Link conțin parțial cod software dezvoltat de către terți, inclusiv codul software supus GNU General Public Licence ("GPL"), Versiunea 1/Versiunea 2/Versiunea 3 sau GNU Lesser General Public License ("LGPL"). Ai dreptul să utilizezi software-ul respectiv dacă respecți termenii licenței GPL.
Ai posibilitatea să examinezi, să listezi și să descarci respectivii termenii ai licenței GPL de aici. Vei primi codurile sursă GPL ale software-ului respectiv utilizat în produsele TP-Link pentru a descărca direct și informații suplimentare, inclusiv o listă a software-ului TP-Link, care conține cod software GPL sub Centrul coduri GPL.
Programele respective sunt distribuite FĂRĂ NICI O GARANȚIE; chiar fără garanția implicită de COMERCIALIZARE sau de POTRIVIRE PENTRU UN ANUMIT SCOP. A se vedea, respectiva Licență Publică Generală GNU pentru mai multe detalii.
Controller Software
The EAP Controller is used to manage multiple EAPs intensively.
Data publicării: 2020-12-11 | Limba: Engleză | Dimensiune Fişier: 90.11 MB |
Sistem de Operare: Win7/8/10/Server |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Supported device models and firmware:
New Feature/Enhancement: Bug Fixed: |
Data publicării: 2020-12-11 | Limba: Engleză | Dimensiune Fişier: 58.42 MB |
Sistem de Operare: Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1
New Feature/Enhancement: 1. Support to manage TL-SL2428P(UN) 4.20. 2. Optimize the protocol for the device reporting information of rate/duplex capability. 3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password. 4. Add the batch cancelling of devices migration in the migration function. 5. Vulnerability optimization
Bug Fixed: 1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP. 2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page. 3. Fixed the bug that the user without device permission may display that it still has permission in the account settings. 4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller. 5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager. 6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller. 7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time. 8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. 5. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian. 6. You may need to save the backup file and uninstall the old Omada Controller before installing this software.
|
Data publicării: 2020-12-11 | Limba: Engleză | Dimensiune Fişier: 59.91 MB |
Sistem de Operare: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Fedora 20 (or above) and Debian 8/9 |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1
New Feature/Enhancement: 1. Support to manage TL-SL2428P(UN) 4.20. 2. Optimize the protocol for the device reporting information of rate/duplex capability. 3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password. 4. Add the batch cancelling of devices migration in the migration function. 5. Vulnerability optimization
Bug Fixed: 1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP. 2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page. 3. Fixed the bug that the user without device permission may display that it still has permission in the account settings. 4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller. 5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager. 6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller. 7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time. 8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. 5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself. 6. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian.
|