Omada Discovery Utility

Omada Discovery Utility 5.0.8

Do pobrania
Data publikacji: 2021-12-29 Język: Angielski Rozmiar pliku: 44.31 MB
System operacyjny: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

New Feature/Enhancement:

1. Adapt to Omada SDN Controller v5.0, support new device protocol and new inform url format

 

Bug fixed:

1. Upgrade log4j version to 2.16.0 to avoid remote code execution vulnerability in Apache log4j2.

2. Fixed the bug that the actual issued IP address is inconsistent with the configuration.

3. Fixed the bug that batch IP is issued to multiple devices continuously, but not all of them are actually issued.

4. Fixed the bug that when a port conflict is detected, the prompt message is not centered and the display is incomplete.

 

Note:

1. Omada CBC v5 must use this version of Omada Discovery Utility due to the change of the inform url format.

2. Double click the software or run the command "java -jar **.jar" to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

4. Omada Controller and Discover Utility cannot run on the same computer at the same time.

Omada Discovery Utility 4.2.4

Do pobrania
Data publikacji: 2020-11-09 Język: Angielski Rozmiar pliku: 33.16 MB
System operacyjny: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

New Feature/Enhancement:

1. Support to discover the gateway and switch that support Omada SDN platform.

2. Add timeout mechanism during adopting the devices.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

4. Omada Controller and Discover Utility cannot run on the same computer at the same time.

Omada Discovery Utility 4.1.4

Do pobrania
Data publikacji: 2020-07-07 Język: Angielski Rozmiar pliku: 31.11 MB
System operacyjny: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:

1. Fully adapted to Omada SDN Controller v4.1.4.

2. Support to discover the gateway and switch that support Omada SDN platform.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

4. Omada Controller and Discover Utility cannot run on the same computer at the same time.

Omada Discovery Utility_v3.2.1

Do pobrania
Data publikacji: 2019-08-06 Język: Angielski Rozmiar pliku: 25.85 MB
System operacyjny: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that the Discovery Utility may fail to find EAPs.

2. Fixed the bug that the Cancel button may overlap with the display box after managing APs.

 

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC first.

Omada Discovery Utility_v3.1.13

Do pobrania
Data publikacji: 2019-06-14 Język: Angielski Rozmiar pliku: 23.54 MB
System operacyjny: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11

Bug fixed:

1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs.

2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS.

Note:

1. This version of software can be used in both Windows and Mac operation system.

2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software).

3. To run this software, you need to install JRE 8.0 on your PC.

Omada Discovery Utility_v2.0.0_Mac

Do pobrania
Data publikacji: 2018-07-24 Język: Angielski Rozmiar pliku: 84.16 MB
System operacyjny: Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

Konfiguracja

  • How to Set Up the Whole Network of Gateway, Switches, and EAPs Using Omada SDN Controller

    This video will demonstration how to do a full configuration with TP-Link Omada products including gateway, switches and EAPs. As an example, we are going to build the wired and wireless networks from scratch at our TP-Link Office. The setup consists of 7 steps: Step 1. Log in to the Controller Step 2. Adopt Devices Step 3. View Dashboard and Menus Step 4. Set up WAN Step 5. Set up LAN and VLANs Step 6. Set up Wi-Fi Step 7. Set up ACL

    Rozwiń więcej Zwiń
  • How to setup the Omada Hardware Controller (OC200/OC300) via web browser

    This video will demonstrate how to set up OC200/OC300 via web browser. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)

    Rozwiń więcej Zwiń
  • How to setup the Omada Hardware Controller (OC200/OC300) via your mobile phone

    This video will demonstrate how to set up OC200/OC300 via your mobile phone. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)

    Rozwiń więcej Zwiń

FAQ

Aktualizacja oprogramowania pozwala na rozwiązanie problemów ze starszą wersją oprogramowania oraz może dodać nowe funkcje routera i zwiększyć jego wydajność.

Aktualizacja

WAŻNE: Aby zapobiec problemom podczas aktualizacji, zapoznaj się z poniższymi punktami:

  • Użyj pliku Firmware dostępnego na lokalnej stronie TP-Link, z regionu w którym zakupiłeś/aś swoje urządzenie TP-Link. W przeciwnym razie naruszy to warunki gwarancji. Kliknij tutaj, aby zmienić stronę jeśli będzie to konieczne.
  • Sprawdź wersję sprzętową i oprogramowania Twojego urządzenia. Aktualizacja z użyciem nieodpowiedniego pliku Firmware może uszkodzić Twoje urządzenie i naruszyć warunki gwarancji.
    (Zazwyczaj wersja V1.x=V1.0, V2.x=V2.0 itd, lub Vx.x6/Vx.x8=Vx.x0, np V1.26/V1.28=V1.20)
    Jak sprawdzić wersję sprzętową urządzenia TP-Link?
  • NIE odłączaj urządzenia od prądu podczas trwania aktualizacji. Może to spowodować trwałe uszkodzenia.
  • Aby zapobiec nieoczekiwanemu rozłączeniu, NIE przeprowadzaj aktualizacji pliku ISP za pomocą połączenia bezprzewodowego jeżeli nie jest to konieczne (na przykład gdy urządzenie TP-Link nie ma portu LAN/Ethernet).
  • Zalecamy wyłączyć wszystkie aplikacje korzystające z internetu lub rozłączyć połączenie z Internetem na urządzeniu przed przeprowadzeniem aktualizacji.
  • Przed rozpoczęciem aktualizacji rozpakuj pobrany plik za pomocą programu do dekompresji, takiego jak np. 7Zip lub WinRAR.

OC300(UN)_V1_1.10.7_20220623

Do pobrania
Data publikacji: 2022-07-25 Język: Angielski Rozmiar pliku: 182.57 MB

Built-in Omada SDN Controller v5.3.2

OC300(UN)_V1_1.8.2 Build 20220411

Do pobrania
Data publikacji: 2022-05-17 Język: Angielski Rozmiar pliku: 181.03 MB

Built-in Omada SDN Controller v5.1.8

OC300(UN)_V1_1.7.1_20220112

Do pobrania
Data publikacji: 2022-01-19 Język: Angielski Rozmiar pliku: 161.72 MB

Built-in Omada SDN Controller v5.0.30

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

OC300(UN)_V1_1.2.3 Build 20210914

Do pobrania
Data publikacji: 2021-10-26 Język: Angielski Rozmiar pliku: 123MB

Built-in Omada SDN Controller v4.4.6

If you are planning to upgrade to this version from an old Controller (V3.2.14 or below), please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new features of the Controller require firmware upgrades to the device, the firmware for gateways will be released soon.

 

OC300(UN)_V1_1.2.2 Build 20210721

Do pobrania
Data publikacji: 2021-09-06 Język: Angielski Rozmiar pliku: 123.24MB

Build-in Omada SDN Controller v4.4.4

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

OC300(UN)_V1_1.1.0 Build 20210406

Do pobrania
Data publikacji: 2021-04-28 Język: Angielski Rozmiar pliku: 120.33MB

Build-in Omada SDN Controller v4.3.5

If you are planning to upgrade from the old controller(v3.2.14 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

Some new functions of the Controller require device firmware support, and the supporting firmware for routers and switches will be released soon.

OC300(UN)_V1_1.0.4 Build 20210118

Do pobrania
Data publikacji: 2021-03-03 Język: Angielski Rozmiar pliku: 119.38MB

Built-in Omada SDN controller v4.2.11.

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2

Gateway:

TL-R605_V1, TL-ER7206_V1

 

Bug Fixed:

1. Fixed the bug that we may not be able to export the XLSX file in Settings->Services->Export Data.

2. Fixed the bug that the OC300 may get an “Invalid Controller” error in the Cloud Access function if the OC300 didn’t connect to the Internet during the Quick Setup.

3. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time.

4. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A.

5. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time.

6. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller.

7. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect.

8. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list.

9. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics.

10. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID.

11. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.

 

Notes:         

1. For OC300 (UN) V1 Only.

2. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

3. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of the Omada Controller Upgrade Guide.

4. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 

5. This version of the controller is applied to the Omada APP of version 3.0.X or above.

 

OC300(UN)_V1_1.0.3_Build_20201119

Do pobrania
Data publikacji: 2020-12-18 Język: Angielski Rozmiar pliku: 118.6MB

Built-in Omada SDN controller v4.2.8.

If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1

Gateway:

TL-R605_V1, TL-ER7206_V1

 

New Feature/Enhancement:

1. Support to manage TL-SL2428P(UN) 4.20.

2. Optimize the protocol for the device reporting information of rate/duplex capability.

3. Optimize the password retrieval mechanism. If multiple local accounts are bound to one mailbox, you can choose which account to reset the password.

4. Add the batch cancelling of devices migration in the migration function.

5. Vulnerability optimization

 

Bug Fixed:

1. Fixed the bug that the device will move to the upper left corner when you visit again if the device location is locked in the MAP.

2. Fixed the bug that uplink signal strength of Mesh EAP is not displayed accurately on the devices private configuration page.

3. Fixed the bug that the user without device permission may display that it still has permission in the account settings.

4. Fixed the bug that the function of Log Server/Alert Email may not take effect after restoring the backup file of Controller.

5. Fixed the bug that you may unsuccessfully import the local user account in the Hotspot Manager.

6. Fixed the bug that the “Last Seen” time in the private configuration page of the switch is the last uptime (not the last disconnected time) after the switch disconnects from Omada Controller.

7. Fixed the bug that the expiration time of Facebook authentication in “->authorized clients” is inconsistent with the actual expiration time.

8. Fixed the bug that the Controller may generate lots of roaming logs if clients leave from one EAP to another EAP implicitly since clients still send auth frame to the previous EAP.

 

Notes:

1.  For OC300(UN) V1 Only.

2.  Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

3.  If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

4.  Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 

5.  This version of the controller is applied to Omada APP of version 3.0.X or above.

OC300(UN)_V1_1.0.1 Build 20201016

Do pobrania
Data publikacji: 2020-11-13 Język: Angielski Rozmiar pliku: 118.58MB

Built-in Omada SDN controller v4.2.4.


Omada SDN Controller can manage only certain devices with supported firmware. Please make sure your device is compatible with Omada SDN Controller, and follow Omada Controller Upgrade Guide to upgrade OC200.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1

Gateway:

TL-R605_V1, TL-ER7206_V1

 

New Feature/Enhancement:

1.  Support to import the SSL certificate of PFX format. 

2.  Support to create of up to 1000 sites.

3.  Support arbitrary adjustment of logo display and closing logo.

4.  Support to paste the IP address for everywhere there is IP setting.

5.  Support to restore the site privilege setting for cloud users when backup and restore for the same controller.

6.  Support to print all unused voucher codes. 

7.  Support to delete the archived alert log and event log.

8.  Support to export device list, client list, etc. in Export Data function. 

9.   Support to drag and drop card adjust the dashboard display.

10.  Add the Hostname/IP setting which will be used for the controller URL in the notification email.

11.  Add Past Connection page in the Insight menu.

12.  Improve the MAP topology display.  

 

Bug Fixed:

1.  Fixed the bug that the Limited Online Users voucher code still can be used after expired.

2.  Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function.

3.  Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access.

4.  Fixed the bug that the cutout logo will show a black background.

5.  Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.

 

Notes:

1.  For OC300(UN) V1 Only.

2.  Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

3.  If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide.

4.  Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 

5.  This version of the controller is applied to Omada APP of version 3.0.X or above.

 

OC300(UN)_V1_1.0.0 Build 2020080

Do pobrania
Data publikacji: 2020-11-09 Język: Angielski Rozmiar pliku: 114.01MB

Bundle Omada Controller 4.1.5

If you are using the old controller(v3.2.10 or below) and planning to replace with OC300, please read the Omada Controller Upgrade Guide at first.

 

Supported device models and firmware:

EAP:

EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above

EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above

EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above

EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above

EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above

EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above

EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above

EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above

EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1

Switch:

TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1

Gateway:

TL-R605_V1, TL-ER7206_V1

 

New Feature/Enhancement:

1. First firmware for OC300(UN)_v1.

2. Suitable for small and medium business network.

3. Omada SDN hardware controller provides a unified approach to configuring enterprise networks comprised of routers, switches, and wireless access points.

4. Brand new UI and style to provide high-efficiency, rapid and comprehensive network settings and maintenance function.

 

Notes:

1. Omada SDN Controller can configure and manage only the certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller.

2. This version of controller is applied to Omada APP of version 3.0.X or above.

3. For OC300 (UN) v1.0 only.

Korzystanie z firmware'u innej firmy

W przypadku niektórych modeli produktów TP-LINK istnieje możliwość zastąpienia firmware'u udostępnionego przez TP-LINK firmwarem oferowanym przez inną firmę. Jednakże, firma TP-LINK nie jest zobowiązana do wykonywania żadnych prac konserwacyjnych i nie oferuje wsparcia technicznego dla takich produktów. Nie gwarantuje także stabilności oraz poprawności działania firmware'u innej firmy. Uszkodzenie produktu, spowodowane korzystaniem z firmware'u innej firmy, powoduje utratę jego gwarancji.   

Centrum GPL

Produkty TP-LINK korzystają częściowo z oprogramowania stworzonego przez strony trzecie, w tym z kodu źródłowego oprogramowania zgodnego z licencją GNU General Public Licence (“GPL“), w wersji 1/wersji 2/wersji 3 lub licencji GNU Lesser General Public License ("LGPL"). Aby korzystać z oprogramowania, musisz się zgodzić się na warunki użytkowania produktów na licencji GPL.

Aby spełnić warunki licencji GPL, firma TP-LINK, jeżeli to konieczne, wysyła pocztą kody źrółowe GPL dla konkretnych oprogramowań na płycie CD do odczytu elektronicznego lub drogą mailową. Więcej informacji można uzyskać dla określonych produktów lub oprogramowań. Poprzez Centrum GPL firma TP-LINK zapewnia możliwość bezpłatnego pobierania kodów źródłowych oprogramowań zgodnych z licencją GPL oraz stosowanych w produktach TP-LINK.

Warunki licencji GPL znajdziesz, wydrukujesz i pobierzesz tutaj.

Dostępne programy rozprowadzane są BEZ GWARANCJI; nie obejmuje ich także gwarancja PRZYDATNOŚCI HANDLOWEJ oraz PRZYDATNOŚCI DO OKREŚLONEGO CELU. Więcej informacji dostępnych jest na stronie GNU GPL.

Emulatory

Wersja firmware
Tryb pracy
Język
Omada SDN Controller 5.0
-
Angielski
Omada SDN Controller 4.3
-
Angielski

Uwaga:

1. Emulator to wirtualny interfejs graficzny strony konfiguracyjnej produktu. Szczegółowe informacje o funkcjach i specyfikacji poszczególnych produktów znajdują się na stronach produktowych.

2. Upewnij się, że wersja firmware'u jest zgodna z wersją podaną w emulatorze. Każda wersja firmware'u ma własny interfejs graficzny i funkcjonalności.

3. Pamiętaj, że emulatory nie są dostępne dla wszystkich wersji firmware'u.

T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code:

NewsletterTP-Link poważnie traktuje twoją prywatność. Więcej szczegółów znajdziesz na stronie Informacja o przetwarzaniu danych osobowych.

z United States?

Uzyskaj produkty, wydarzenia i usługi przeznaczone dla Twojego regionu.