Download for OC300
Setup Video
-
How to setup the Omada Hardware Controller (OC200/OC300) via web browser
This video will demonstrate how to set up OC200/OC300 via web browser. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)Learn More
-
How to setup the Omada Hardware Controller (OC200/OC300) via your mobile phone
This video will demonstrate how to set up OC200/OC300 via your mobile phone. The setup consists of four steps: • Connect the controller to your local network. • Log in with your TP-Link ID. • Add the controller to your TP-Link ID. • Set up the controller THIS VIDEO APPLIES TO: • All TP-Link EAP models (except EAP120 and EAP220) • Omada Hardware Controller (OC200/OC300) • Mass EAPs (usually more than three)Learn More
FAQs
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
How to find the hardware version on a TP-Link device? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
OC300(UN)_V1_1.0.3_Build_20201119 | |||
---|---|---|---|
Published Date: 2020-12-18 | Language: English | File Size: 118.6MB | |
|
OC300(UN)_V1_1.0.1 Build 20201016 | |||
---|---|---|---|
Published Date: 2020-11-13 | Language: English | File Size: 118.58MB | |
|
OC300(UN)_V1_1.0.0 Build 2020080 | |||
---|---|---|---|
Published Date: 2020-11-09 | Language: English | File Size: 114.01MB | |
|
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
EAP Discovery Tool
The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.
Published Date: 2020-11-09 | Language: English | File Size: 33.16 MB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
New Feature/Enhancement: 1. Support to discover the gateway and switch that support Omada SDN platform. 2. Add timeout mechanism during adopting the devices.
Note: 1. This version of software can be used in both Windows and Mac operation system. 2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC first. 4. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
Published Date: 2020-07-07 | Language: English | File Size: 31.11 MB |
Operating System: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
New Feature/Enhancement: 1. Fully adapted to Omada SDN Controller v4.1.4. 2. Support to discover the gateway and switch that support Omada SDN platform.
Note: 1. This version of software can be used in both Windows and Mac operation system. 2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC first. 4. Omada Controller and Discover Utility cannot run on the same computer at the same time. |
Published Date: 2019-08-06 | Language: English | File Size: 25.85 MB |
Operating System: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
Bug fixed: 1. Fixed the bug that the Discovery Utility may fail to find EAPs. 2. Fixed the bug that the Cancel button may overlap with the display box after managing APs.
Note: 1. This version of software can be used in both Windows and Mac operation system. 2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS (**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC first. |
Published Date: 2019-06-14 | Language: English | File Size: 23.54 MB |
Operating System: WinXP/Vista/7/8/8.1/10/Server2008/Server2012/Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
Bug fixed: 1. Fixed the bug that when the Discovery Utility issues Controller_IP to EAPs which are in factory status, Controller cannot batch manage the EAPs. 2. Fixed the bug that sometimes the Discovery Utility cannot find all EAPs when running in MacOS. Note: 1. This version of software can be used in both Windows and Mac operation system. 2. Double click the software or run the command “java –jar **.jar” to run the software on MacOS(**.jar is the name of this software). 3. To run this software, you need to install JRE 8.0 on your PC. |
Published Date: 2018-07-24 | Language: English | File Size: 84.16 MB |
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11 |
||
New Feature/Enhancement: |
SubscribeTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.
Be The First To Get Exclusive Deals & News