How do I install TP-Link wireless router to work with a Modem (Static IP)?

Note: This article is not relevant to you if you have any of the following conditions.

Your modem is DSL modem, you need to dial up on the computer to get internet from the modem, please refer to How do I install TP-Link wireless router to work with DSL Modem (PPPoE)
Your modem is a fiber/cable modem. You can get internet access automatically from the modem without any other activity.However, Internet access is only available for one user, cannot be shared to more users please refer to How do I install TP-Link router to work with a fiber/Cable Modem
You can get internet access automatically from the modem without any other activity. What’s more, the modem’s Internet access is available for more than one user, can be shared to more users, please refer to How do I install TP-Link router to work with a ADSL modem (Dynamic IP)

Advanced Preparations：

1. Turn off your modem, router and computer.

2. Connect your Cable modem to the WAN port of the router via an Ethernet cable.

Connect your computer which used to connect directly to your cable modem to the router’s LAN port via an Ethernet cable. And make sure the corresponding LEDs to the WAN and LAN port light up.

3. Power on your modem first and then router and computer.

Step 1

Log into the router’s web interface.

To get some help, please refer to the article How do I log into the web-based Utility (Management Page) of TP-Link wireless router

Step 2

Configure WAN Connection Type.

After log into the router, click Network > WAN on the left-side menu.

Select static IP as the WAN Connection Type, shown as below. Enter the IP parameters provided by your ISP into the boxes shown as below, then click Save button. Wait about 2 minutes to see whether you get internet access.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Whole-Home Wi-Fi

Routers

Modems/ Gateways

Network Expansion

SOHO Switches

Mobile Wi-Fi

Adapters

Accessories

Cloud Cameras

Smart Plugs

Smart Bulbs

JetStream Switches

Omada EAP Series

Pharos Wireless Broadband

SafeStream Router

Wi-Fi Router

PON

How do I install TP-Link wireless router to work with a Modem (Static IP)?

How do I install TP-Link wireless router to work with a Modem (Static IP)?

SubscriptionTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

Follow Us