How to log in to web management page of TP-Link 5G/4G Router

Introduction

This FAQ article provides customers with step-by-step instructions for logging into the web-based management interface of the TP-Link 4/5G Wireless Router effectively.

Requirements

• One device that supports Windows/Mac OS/Android OS/iOS and can open Web browsers, such as a phone, computer, or iPad.
• Power on the TP-Link 4G/5G Wireless Router and wait for it to reboot completely.

Configuration

The web-based management page is a built-in internal web server that does not require internet access. It does, however, require your device to be connected to the 4/5G Wireless Router wired or wirelessly.

Note: Older web browsers may experience compatibility issues with the router’s management page, including login failures and missing features. For changing wireless settings or performing firmware updates, it is recommended to use a wired connection.

Step 1. Connect your device to the TP-Link 4G/5G router

Method 1: Wired

Connect the computer’s Ethernet port to one of the LAN ports on the router via an Ethernet cable.

Method 2: Wireless

Ensure the wireless device connects to the TP-Link 4/5G router's Wi-Fi network. If you forget the password, reset the router and use the default Wi-Fi name and password on its label.

Step 2. Access the web management page

It's recommended to use Firefox, Chrome, or Edge to access the web management page of the router.

Case 1: Most Models

Launch a web browser, and in the address bar at the top of the window, type http://tplinkmodem.net, then press Enter.

Case 2: Multi-Mode Models (e.g., TL-MR3040, TL-MR3020)

When the router is in 3G/4G Mode or WISP Mode, please type http://tplinkwifi.net into your browser. If it works in the Access Point mode, disconnect it from the upstream device first, then use the same domain.

Step 3 (Optional). Allow access to the web management page

If your browser displays a "Privacy Error" warning about an insecure connection, click "Advanced" and select "Proceed to tplinkmodem.net (unsafe)" or "Proceed to 192.168.1.1 (unsafe)" to continue; if this warning doesn't appear, skip directly to Step 4.

A warning message will appear because tplinkmodem.net uses a self-signed certificate (not issued by a trusted authority). This is normal—your connection remains secure.

For details, see: Why TP-Link HTTPS web interface is detected as unsecure by some web browsers?

Step 4. Set / Enter password to sign in

When first accessing the system, set a secure administrator password. For some models, the default username and password are admin/admin.

If you've previously managed the device via the web interface or Tether app, enter your existing password. However, once it has been bound to the TP-Link ID you registered before, please sign in with the TP-Link account information.

If you can't access the web management page and see errors like "no internet" or "the website can't be reached", try the methods below:

• Try to log in to the Tether app.
• Change to another web browser.
• Clear the browser’s cache or use Incognito mode.