다운로드 함 T1600G-52PS V4

하드웨어 버전을 선택 하십시오.:

V4

>TP-Link 장치에서 하드웨어 버전을 찾는 방법은 무엇입니까?

주의 사항 : 모델 및 하드웨어 버전의 가용성은 지역에 따라 다릅니다. 구매를 고려할 때 이러한 세부 사항을 확인하여 검증하십시오.
제품소개
관련 문서

MIBs 파일

T1600G-52PS(UN)_v4_MIB_20190321

다운로드
출시일: 2019-09-25 언어: 영어 파일 크기: 200.17 KB
운영 시스템: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

T1600G-52PS(UN)_V4_MIB_20180716

다운로드
출시일: 2019-05-13 언어: 영어 파일 크기: 206.12 KB
운영 시스템: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux

802.1X 클라이언트

TP-LINK_802.1X_Client_Software

다운로드
출시일: 2017-09-05 언어: 영어 파일 크기: 5.5MB
운영 시스템: Win2000/XP/2003/Vista/7/8/8.1/10

펌웨어

펌웨어 업데이트를 통해 이전 펌웨어 버전의 문제를 해결하고 현재 성능을 향상시킬 수 있습니다.

 

업그레이드 방법

중요사항: 업그레이드 실패를 방지하기 위하여 업그레이드 프로세스를 진행하기 전에 다음 사항을 읽으십시오.

  • TP-Link 장치를 구매한 지역의 로컬 공식 웹사이트에서 펌웨어를 업그레이드하십시오. 그렇지 않으면 보증에 위배됩니다. 여기를 클릭하여 사이트를 변경할 수 있습니다.
  • 펌웨어 버전에 대한 장치의 하드웨어 버전을 확인하십시오. 잘못된 펌웨어로 인해 장치가 손상되고 보증을 무효화시킬 수 있습니다. (일반적인 경우 Vx.0=Vx.6/Vx.8 (예:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (예:V1.20=V1.26/V1.28)
    TP-Link 장치에서 하드웨어 버전을 찾는 방법은 무엇입니까?
  • 업그레이드를 하는 동안 전원을 끄지 마십시오. 이는 제품에 영구적인 손상을 일으킬 수 있습니다.
  • 펌웨어 업그레이드를 하는 동안 무선 연결 끊김 문제를 방지하려면TP-Link 장치에 LAN/이더넷 포트가 없는 경우를 제외하고 유선 연결로 펌웨어를 업데이트하는 것이 좋습니다.
  • 업그레이드를 하기 전에 컴퓨터의 모든 인터넷 응용 프로그램을 중단하거나 간단히 인터넷 선 연결을 끊는 것이 좋습니다.
  • WinZIP 또는 WinRAR와 같은 압축 해제 소프트웨어를 사용하여 업그레이드를 하기 전에 다운로드한 파일의 압축을 해제합니다.

T1600G-52PS(UN)_V4_20200918.

다운로드
출시일: 2021-05-21 언어: 영어 파일 크기: 8.70 MB

New Features/Enhancements:
Add the feature that supports to be managed by the Omada SDN Controller. In the controller mode, some advanced functions will be limited. You can refer to the FAQ2936 to see the functions that can be configured on the controller.


Notes:
1. For T1600G-52PS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.
3. If you choose to manage the switch with controller mode, the settings you configured in standalone mode will lose after the switch is adopted by the controller.  

T1600G-52PS(UN)_V4_20200110

다운로드
출시일: 2020-03-26 언어: 영어 파일 크기: 9.52 MB

New Features/Enhancements:
1. Add the feature that needs to change the password when login for the first time.
2. Add the feature that can choose not to change the IP address when resetting the switch.
3. Add "service reset-disable" for removing reset option from Bootutil.
4. Add built-in Telnet client which allows the switch can telnet other devices.
5. Allow disabling HTTP and HTTPS for access types at the same time.
6. Optimize the password character set to support more special characters.
7. Optimize the BPDU Filter feature to make ports not send out BPDU packets when BPDU Filter is enabled. 
8. Optimized the CLI display of MVR configurations.
9. Support to display MVR members of inactive and active groups.
10. Support to view/clear mac-address table on port/VLAN.
11. Support to fill in file name with folder path when using SNMP or CLI to upgrade firmware or restore config file through TFTP.
Notes:
1. For T1600G-52PS(UN) V4.0
2. Your device's configuration will not be lost after upgrading, which means you don't need to configure your device again after upgrading.

3. After upgrading, it cannot downgrade to the old version firmware because of the encryption rule has changed.

T1600G-52PS(UN)_V4_20190516

다운로드
출시일: 2019-07-04 언어: 영어 파일 크기: 9.75 MB

Modifications and Bug Fixes:
1. Update HTTPS to support TLS1.2.
2. Fix the bug that the settings of SNMP Community/Notification/Trap will lose after rebooting the switch when turning off the global switch of SNMP function. 
3.Fix the bug that the IP in circuit-ID is wrong when the VLANs which the port belong to does not set up the interface and PPPoE IP insertion is IP mode.
4. Fix the bug that NTP server will be changed when setting up only one NTP server and fail to get the time.
5. Fix the bug that cannot set up auto mode for fibre ports which in the port channel. 
6. Fix the bug that access control entries will not take effect when two or more entries are added for port binding.

Notes:
For T1600G-52PS(UN) V4.0.

TP-Link 제품에서 타사 펌웨어를 사용하려면

TP-Link 제품의 일부 공식 펌웨어는 DD-WRT와 같은 타사 펌웨어로 대체 될 수 있습니다. TP-Link는 타사 펌웨어의 성능 및 안정성을 보장하지 않으며 유지 보수 또는 지원을 제공 할 의무가 없습니다. 타사 펌웨어를 사용하여 제품이 손상되면 제품 무상보증이 무효화됩니다.

프로그래머용 오픈 소스 코드(GPL)

참고: TP-Link 제품에는 GNU 일반 공중 사용 허가서 (“GPL“), 버전 1/버전 2/버전 3 또는 GNU 약소 일반 공중 사용 허가서 ("LGPL")의 적용을 받는 소프트웨어 코드를 포함하여 타사가 개발한 소프트웨어 코드가 부분적으로 포함되어 있습니다. 다음 GPL 라이선스 조건에 각 소프트웨어 조건을 사용할 수 있습니다.

 

여기에서 각 GPL 라이선스 조건을 검토, 인쇄 및 다운로드할 수 있습니다. GPL 코드 센터에서 GPL 소프트웨어 코드가 포함된 TP-Link 소프트웨어 목록을 포함하여 TP-Link 제품에 대한 직접 다운로드 및 세부사항에 사용되는 각 소프트웨어의 GPL 소스 코드를 받습니다.

각 프로그램은 상품성 또는 특정 목적의 적합성에 대한 묵시적 보증도 없이 그대로 배포됩니다. 자세한 내용은해당 GNU 일반 공중 사용 허가서를 참조하십시오.

From United States?

해당 지역의 제품, 이벤트 및 서비스를 받아보세요.