Λήψεις για TD-W8961NB
|Ημερομηνία Έκδοσης: 2015-11-24||Γλώσσα: Αγγλικά||Μέγεθος αρχείου: 10.25 MB|
Λειτουργικό Σύστημα : Win2000/XP/2003/Vista/7/8/8.1/10
- How Do I Log into the Web-based Utility (Management Page) of TP-Link DSL Modem & Router?
- How to install TD-8816/8817 , TD-8840T, TD-W8901G(N), TD-W8151N,TD-W8951ND(B), TD-W8961N(D/B) to work with PPPoE
- How to configure Wireless MAC address filter on TD-W8901G(N),TD-W8151N,TD-W8951ND(B),TD-W8961N(D/B)
- How to install TD-8816/8817 , TD-8840T, TD-W8901G(N), TD-W8151N,TD-W8951ND(B), TD-W8961N(D/B) to work with IPoE or Dynamic IP
- How to install TD-8816/8817 , TD-8840T, TD-W8901G(N), TD-W8151N,TD-W8951ND(B), TD-W8961N(D/B) to work with IPoA or Static IP
- How to install TD-8816/8817 , TD-8840T, TD-W8901G(N), TD-W8151N,TD-W8951ND(B), TD-W8961N(D/B) to work with PPPoA
- How to make my TP-Link Wireless Modem Router support Airprint on TD-8816/8817/8840T/8901N/8151N/8961N(D/B)
- How to use Multi-NAT function ( IP address mapping for multiple IP servers) on TD-8816/8817 , TD-8840T, TD-W8901G(N), TD-W8151N,TD-W8951ND(B), TD-W8961N(D/B)
- How to improve my wireless speed or range
- How to configure Static Routing on TP-Link ADSL2+ modem router (Trendchip Solution)
- How to troubleshoot on ADSL modem router through DSL parameters checking on TD-8816/8817/8840T/8901N/8151N/8961N(D/B)
- How to protect your TP-Link network devices from potential attacks
- How to change the LAN IP address of TP-Link DSL modem router
- How to reset TP-Link products to factory defaults
- What can I do if the xDSL LED indicator is not on constantly on my xDSL modem router?
- Powerline adapters may cause intermittent connection of DSL modem router in a few rare cases
- What can I do if I forget the login username/password of my DSL modem/router?
- How to connect/install TP-Link DSL router into your network (Wired network connection)
- How to reset TP-Link ADSL modem router to factory defaults
- Why cannot log into the Management Page with NOD 32 ESET?
- How to connect to Internet by using Windows 7&Windows 8 built-in PPPoE Wizard with a modem at bridge mode
- How to configure PPPoE connection on Mac pro
- How to connect to Internet by using Windows XP built-in PPPoE Wizard with a modem at bridge mode
- How to find or change the wireless password on the TP-Link products
- Troubleshooting: Unstable wireless connection on TP-Link router
- ADSL Modem Router All-in-one Troubleshooting Guide
- How to set up Port Forwarding feature on my TP-Link ADSL Modem Router (Trendchip Solution)
- How to upgrade TP-Link ADSL Modem Router (TrendChip Solution)
- How to use the TD-W8961ND Wireless Bridge (WDS) Function with another TD-W8961ND
- How to configure DHCP Address Reservation (Trendchip Solution)
- How to configure Access Control (ACL) on TP-Link ADSL2+ modem router? (Trendchip Solution)
- How to change wireless channel on my TP-Link wireless ADSL2+ modem router
- How to export configuration file of TP-Link ADSL Modem Router
- How to disable remote management function for TP-Link ADSL modem router
- How to secure wireless network by using ADSL Modem Router with WPA2-PSK
- How to set up my modem router for TPG IPTV (TC solution)
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8); Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
How to find the hardware version on a TP-Link device
- Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
|Ημερομηνία Έκδοσης: 2015-06-30||Γλώσσα: Αγγλικά||Μέγεθος αρχείου: 1.66 MB|
Modifications and Bug Fixes:
First firmware release of TD-W8961NB_V4.0
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.