Download for CPE220 V3

Please choose hardware version:

V3

>How to find the hardware version on a TP-Link device?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Product Overview
Manual

Setup Video

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  •  Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally V1.x=V1)
    How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
CPE220(UN)_V3_20190228
Published Date: 2019-04-11 Language: English File Size: 6.03 MB

Modifications and Bug Fixes:
1.Improved web UI display.
2.Added Antenna Alignment function.
3.Now the https is enabled by default.
4.Added IPV6 function.
 

CPE220(UN)_V3_20180928
Published Date: 2018-10-29 Language: English File Size: 4.94 MB

Modifications and Bug Fixes:
1. Fixed the problem that the device may be reset to factory defaults due to unstable power.
2. Improved web UI display.
3. Fixed the problem that Transmit Power could be set as improper value.
4. Fixed the problem that when the wireless interference is serious, the client may be not connected to the AP when the WPA/WPA2 encryption mode is enabled.
5. Fixed the problem that the "Failed to get data" information may be wrongly displayed.
 

CPE220(UN)_V3_180109
Published Date: 2018-02-13 Language: English File Size: 4.70 MB

Modifications and Bug Fixes:
1. Fixed the WPA2 vulnerability.
2. Fixed the Management VLAN issue that wireless clients will fail to obtian IP addresses when Management VLAN is enabled and given a same VLAN ID as that of SSID VLAN.  
3. Improved web UI display.
4. Fixed the bug that a subnet range cannot be configured for the "Set Source" of the SNMP function.
5. Fixed the bug that CPE's web management page can't be accessed with a new username which contains special symbols.
6. Fixed the bug that when the management vlan and wireless encryption are enabled, wireless client may fail to connect to the CPE.

Note:
For CPE220 3.0

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Control Software

Published Date: 2019-05-08 Language: English File Size: 15.77 MB
Operating System: Linux (Debian/Ubuntu)

Modifications and Bug Fixes:
1. Fixed the problem that Pharos Control may not work normally in Turkish language operating system.
2. Improved security mechanism.
3. Improved log security level.

Notes:
1. When upgrading from the older version, it will cover previous data. So please backup the data first before updating the software.
2. Pharos Control only supports JRE1.7 and JRE1.8.

Published Date: 2019-03-13 Language: English File Size: 71.91 MB
Operating System: Windows server2003/2008/2012/2016 and Vista/7/8/10

Modifications and Bug Fixes:
1. Fixed the problem that Pharos Control may not work normally in Turkish language operating system.
2. Improved security mechanism.
3. Improved log security level.

Notes:
1. We suggest customers modify username and password after upgrading to the latest version of Pharos Control to improve security level.

Published Date: 2017-12-21 Language: English File Size: 47.68 MB
Operating System: Linux (Debian/Ubuntu)

Modifications and Bug Fixes:

1. Use the B/S structure and inherit the functions of PharOS Control v1.
2. Add the Google Map and some other new functions.

Notes:

1. For PharOS CPE/WBS series wireless broadband products(including v1 devices).
2. Require to install Java (v1.7 or above) in Linux before running this software.

Published Date: 2017-12-21 Language: English File Size: 72.35MB
Operating System: Windows server2003/2008/2012/2016 and Vista/7/8/10

Modifications and Bug Fixes:

New Features/Enhancements:
1. Use the B/S structure and inherit the functions of PharOS Control v1.
2. Add the Google Map and some other new functions.

Notes:

For PharOS CPE/WBS series wireless broadband products (including v1 devices).

GPL Code

Emulators

Firmware Version
Working Mode
Language
170609
-
English
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: