Controller Software

Omada_SDN_Controller_v5.14.20.9_Windows

Download
Published Date: 2024-05-27 Language: Multi-language File Size: 317.48 MB
Operating System: Windows 7/8/10/11/Server

Omada_SDN_Controller_v5.13.30.8_Windows

Download
Published Date: 2024-02-05 Language: Multi-language File Size: 283.05 MB
Operating System: Windows 7/8/10/11/Server

As this version optimizes the WAN/LAN port configuration of Omada Gateway, it will cause some WAN ports to be enabled by default and cannot be disabled. This may result in changes to the load balance configuration, you can make the changes manually.

Setup Video

  • How to Install and Set Up Omada Software Controller

    This video will show you how to install and set up the Omada Software Controller, using the Windows version for demonstration.

    More Fold
  • How to Adopt Omada Devices via Omada Controller

    This video will show you how to adopt Omada devices and configure a gateway network via the Omada SDN Controller (Omada Software Controller is used as an example).

    More Fold
  • How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller

    This video will show you How to add devices with Zero-Touch Provisioning (ZTP) via Could-Based Controller.

    More Fold
  • How to Monitor and Manage Devices via Omada SDN Controller

    This video will show you how to monitor and manage devices via Omada SDN Controller.

    More Fold
  • How to Configure Schedules to Automate Network Control via Omada SDN Controller

    This video shows how to configure WLAN Schedule, Port Schedule (PoE Schedule, Port Schedule), Upgrade Schedule, and Reboot Schedule to help you easily manage your network using the Omada Software Controller for demonstration.

    More Fold
  • How to Monitor and Manage Clients via Omada SDN Controller

    This video will show you how to monitor and manage clients via Omada SDN Controller.

    More Fold
  • How to Check the Clients Signal Strength and Estimate the Actual Speed

    This video will show you how to check the client signal strength and estimate actual network speeds.

    More Fold
  • How to Create User Accounts on Omada SDN Controller

    This video shows how to create custom roles, local user accounts and cloud user accounts of different levels on the Omada SDN Controller.

    More Fold

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
    How to find the hardware version on a TP-Link device
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

SG2218(UN)_V1.20_1.20.0 Build 20230818

Download
Published Date: 2023-12-28 Language: English File Size: 11.17 MB

This firmware is fully adapted to Omada SDN Controller v5.9 and above.

Notes:
Modify the product name to Omada series and remove "TL-" from the product model number, the firmware of the old and new devices can be upgraded with each other.

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-LINK partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-LINK products for direct download and further information, including a list of TP-LINK software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: SDN switch/router is compatible with Omada App only in controller mode. To use Omada, please update your device's firmware to the latest version.

From United States?

Get products, events and services for your region.