5GHz 150Mbps Outdoor Wireless Access Point TL-WA7510N
- Complies with IEEE 802.11a/n, wireless speed up to 150Mbps
- 5GHz solution ensures fewer disturbances caused by other 2.4GHz radio devices and more stable
- Outdoor weatherproof and 4000V lightning/15KV ESD protection design
- 15dBi dual-polarized antenna to build long distance Wi-Fi connection
- High Power to boost your signal coverage and link speed
- Up to 60 meters (200 feet) of flexible deployment with included Power over Ethernet Injector
High Transmission Capability Professional Outdoor Solution
With up to 500mw wireless transmission power and a 15dBi dual-polarized high gain antenna, the TL-WA7510N can produce and pick up a powerful and stable signal for a wireless connection ranging multiple kilometers.
With up to 500mw wireless transmission power and a 15dBi dual-polarized high gain antenna, the TL-WA7510N can produce and pick up a powerful and stable signal for a wireless connection ranging multiple kilometers.
Professional Outdoor Solution
TL-WA7510N features a weatherproof enclosure and special protection against ESD and lightning. It supports passive Power over Ethernet (PoE), making it a versatile outdoor networking solution.
- Weatherproof
- Enclosure
- 4000V Lightning
- Protection
- 15KV ESD
- Protection
- Temperature Endurance
- -30°C to 70°C
Up to 60 Meters PoE Grounding Terminal
Multiple Applications
The TL-WA7510N supports AP Client Router (WISP Client), AP Router, Bridge, Repeater and Client modes, providing various wireless operating modes to accommodate as many applications as possible.
- Wireless Access
- Wireless Backbones
- Wireless Surveillance
Intelligent Management Tools
-
- Tool 1: Antenna Alignment
- Users can use the antenna alignment tool to adjust the direction of their APs using a live signal strength meter to judge which direction is best making setup that much simpler.
-
- Tool 2: ACK Timeout
- With the AP’s ACK timeout tool able to adjust the distance between two APs, it allows users to set a specific distance in order to establish the most robust wireless connection possible.
-
- Tool 3: Ping Watch Dog
- Ping Watch Dog enables users to maintain the ping command to check the quality of the wireless link and can reboot the remote AP if the wireless signal becomes worse or disconnects.
| CPE510 | CPE210 | TL-WA7510N | TL-WA7210N | TL-WA5210G | |
|---|---|---|---|---|---|
| Wireless Performance | |||||
| Wireless Speed | 5GHz 300Mbps | 2.4GHz 300Mbps | 5GHz 150Mbps | 2.4GHz 150Mbps | 2.4GHz 54Mbps |
| Transmit Power | 23dBm | 27dBm | 27dBm | 27dBm | 27dBm |
| Antenna | 13dBi | 9dBi | 15dBi | 12dBi | 12dBi |
| MIMO | √ | √ | - | - | - |
| Coverage Range | 15km+ | 5km+ | 5km+ | 5km+ | 2km+ |
| Hardware | |||||
| Processor | 560MHz | 560MHz | 400MHz | 400MHz | 180MHz |
| Memory | 64MB DDR2 | 64MB DDR2 | 32MB DDR | 32MB DDR | 16MB DDR |
| Compatibility | 802.11a/n | 802.11b/g/n | 802.11a/n | 802.11b/g/n | 802.11 b/g |
| External Antenna Interface | - | - | 1 * RP-SMA | 1 * RP-SMA | 1 * RP-SMA |
| Weatherproof Enclosure | √(IPX5) | √(IPX5) | √ | √ | √ |
| Dual Ethernet Ports | √ | √ | - | - | - |
| PoE Passthrough | √ | √ | - | - | - |
| Grounding Terminal | √ | √ | √ | √ | √ |
| Lightning Protection over Ethernet Cable |
√ | √ | - | - | - |
| ESD Protection | 15kV | 15kV | 15kV | 15kV | 15kV |
| Lightning Protection | 6kV | 6kV | 4kV | 4kV | 4kV |
| Power Supply | 24V Passive PoE Adapter |
24V Passive PoE Adapter |
12V Power Adapter + Passive PoE Injector | ||
| Software | |||||
| Operation Modes | AP / Client / Bridge / Repeater / AP Client Router (WISP Client) / AP Router Mode | ||||
| MAXtream TDMA Mode | √ | √ | - | - | - |
| Channel Bandwidth | 5/10/20/40MHz | 5/10/20/40MHz | 20/40MHz | 20/40MHz | 20MHz |
| Transmit Power Control | Stepping 1dBm | Stepping 1dBm | Stepping 3dBm | Stepping 3dBm | - |
| Antenna Alignment | √ | √ | √ | √ | √ |
| Throughtput Monitors | √ | √ | - | - | - |
| Spectrum Analyzer | √ | √ | - | - | - |
| Iperf Speed Test Tool | √ | √ | - | - | - |
| Pharos Control Supported (Central Network Management Application) |
√ | √ | - | - | - |
| HARDWARE FEATURES | |
|---|---|
| Interface |
1 10/100Mbps Auto-Sensing RJ45 Port (Auto MDI/MDIX, PoE) 1 External Reverse SMA Connector 1 Grounding Terminal |
| Button | Reset Button |
| External Power Supply | 12VDC / 1.0A |
| Wireless Standards | IEEE 802.11a , IEEE 802.11n |
| Dimensions ( W x D x H ) | 9.8 x 3.3 x 2.4 in. (250 x 85 x 60.5mm) |
| Antenna | 15dBi Dual-Polarized Directional Antenna |
| Antenna Beamwidth |
Horizontal: 60° Vertical: 14° |
| Protection |
15KV ESD Protection 4000V Lightning Protection Grounding Terminal Integrated |
| WIRELESS FEATURES | |
|---|---|
| Frequency |
5.150-5.250GHz 5.250-5.350GHz (Support Dynamic Frequency Selection) 5.470-5.725GHz (Support Dynamic Frequency Selection) 5.725-5.825GHz Note: It varies in different countries or regions. |
| Signal Rate |
11a: Up to 54Mbps (Dynamic) 11n: Up to 150Mbps (Dynamic) |
| Reception Sensitivity |
802.11a 54M: -77dBm 48M: -79dBm 36M: -83dBm 24M: -86dBm 18M:-91dBm 12M:-92dBm 9M:-93dBm 6M:-94dBm 802.11n 150M: -73dBm 121.5M: -76dBm 108M: -77dBm 81M: -81dBm 54M:-84dBm 40.5M:-88dBm 27M:-91dBm 13.5M:-93dBm |
| Wireless Modes |
AP Router Mode AP Client Router Mode (WISP Client) AP / Client / Bridge / Repeater Mode |
| Wireless Functions | WDS Bridge, Wireless Statistics |
| Wireless Security |
SSID Enable/Disable MAC Address Filter 64/128/152-bit WEP Encryption WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption |
| Advanced Functions |
Up to 60 meters PoE is supported Provides 4-level signal LED indicator |
| Transmission Power |
<20dBm (EIRP, For countries using CE Standards) <27dBm (Peak Output Power, For countries using FCC Standards) |
| OTHERS | |
|---|---|
| Certification | FCC, RoHS |
| Package Contents |
TL-WA7510N Power Supply Unit Power Injector Resource CD Quick Installation Guide |
| System Requirements | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7, MAC OS, NetWare, UNIX or Linux. |
| Environment |
Operating Temperature: -30°C~70°C (-22℉~158℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~95% non-condensing |