Bu web sitesi çerezler içermektedir. Çerezlerin kullanım amacı ve 6698 sayılı Kişisel Verilerin Korunması Kanunu uyarınca kişisel verilerin kullanımına dair şirket politikası hakkında daha fazla bilgi için buraya basınız. Tekrar Gösterme
Recent updates may have expanded access to feature(s) discussed in this FAQ. Visit your product's support page, select the correct hardware version for your device, and check either the Datasheet or the firmware section for the latest improvements added to your product. Please note that product availability varies by region, and certain models may not be available in your region.
OpenVPN is an open-source virtual private network (VPN) software that utilizes SSL/TLS protocols for encrypted communication. It provides secure remote access and site-to-site connections and is widely used for protecting network communication and access control.
Please follow the steps below to set up the OpenVPN Server on Deco APP.
1. Launch the Deco app. Go to MORE > Advanced > VPN Server, and tap Add VPN Server.
2. We recommend enabling DDNS (Dynamic Domain Name System) to bind your WAN IP to a domain name. This can prevent issues with your WAN IP changing, which might otherwise cause VPN connection problems.
3. Select OpenVPN, enter the necessary information and save the settings.
Description: Enter a name for this VPN.
Service Type: Select the service type (communication protocol) for OpenVPN: UDP/TCP.
VPN Port: Enter a VPN service port to which a VPN device connect, and the port number should be between 1024 and 65535.
VPN Subnet/Netmask: Enter the range of IP addresses that can be leased to the device by the OpenVPN server.
Client Access: Select your client access type. Select Home Network Only if you only want the remote device to access your home network. Select Internet and Home Network if you also want the remote device to access internet through the VPN server.
Note: Deco/router does not support UDP's NAT Loopback. If you configure a VPN server on deco using a UDP-based VPN protocol, and try to connect to the server from the local network, you will not be able to connect. If there is a need to connect to the server from the LAN side, Select TCP in Service Type.
4. Tap the VPN you have saved and tap Export Config File to save the OpenVPN configuration file which will be used by the remote device to access your router.
Bu SSS faydalı mı?
Your feedback helps improve this site.
Bu makaleyle ilgili sorununuz nedir?
Üründen memnun kalmadım
Çok Karışık
Karışık Başlık
Bu benim için geçerli değil
Çok Belirsiz
Diğer
Teşekkürler
We appreciate your feedback. Click here to contact TP-Link technical support.
Bu web sitesi çerezler içermektedir. Çerezlerin kullanım amacı ve 6698 sayılı Kişisel Verilerin Korunması Kanunu uyarınca kişisel verilerin kullanımına dair şirket politikası hakkında daha fazla bilgi için buraya basınız. Tekrar Gösterme
Bu web sitesi çerezler içermektedir. Çerezlerin kullanım amacı ve 6698 sayılı Kişisel Verilerin Korunması Kanunu uyarınca kişisel verilerin kullanımına dair şirket politikası hakkında daha fazla bilgi için buraya basınız. Tekrar Gösterme
Temel Çerezler
Bu çerezler, web sitesinin çalışması için gereklidir ve sistemlerinizde devre dışı bırakılamaz.
Analiz çerezleri, web sitemizin işlevselliğini geliştirmek ve uyarlamak için web sitemizdeki faaliyetlerinizi analiz etmemizi sağlar.
Pazarlama çerezleri, ilgi alanlarınıza uygun bir profil oluşturmak ve size diğer web sitelerinde alakalı reklamlar göstermek için reklam ortaklarımız tarafından web sitemiz aracılığıyla ayarlanabilir.