Download pentru T1500-28PCT
>Cum pot afla versiunea hardware a unui dispozitiv TP-Link?
- Product Overview
- Documente
-
- 802.1X Client Software_User Guide
- Wall Mountable Switches_Wall Mounting Guide
- Rackmount Switch(EU2-12Languages)_ Installation Guide
- T1500-28PCT(TL-SL2428P)(UN)_V3_CLI Guide
- T1500-28PCT(TL-SL2428P)(UN)_V3_User Guide
- T1500-28PCT(UN)_V3_Installation Guide
- Switches(EU1_13Languages)_Quick Installation Guide
FAQ
- Troubleshooting Instruction of TP-Link switch’s SFP port
- How to configure Voice VLAN to optimize the transmission of voice traffic on TP-Link Smart and Managed Switches using the new GUI?
- What should I do if I cannot access the web management page of my TP-Link switch?
- Cum configurez IGMP Snooping pe un switch TP-Link L2 pentru a utiliza serviciul IPTV?
- How to test the Jumbo Frame pass-through feature on TP-Link switches?
- How to configure 802.1Q VLAN for LAG ports on Smart and Managed switches using the new GUI?
- How to configure IGMP Snooping for IPTV network on L2 Managed switches using the new GUI?
- How to configure MAC ACL on Smart and L2 Managed switches using the new GUI
- How to configure MSTP on L2 Managed switches using the new GUI?
- How to configure STP/RSTP on L2 Managed switches using the new GUI?
- How to configure Access Control to block users' access to the switch using the new GUI?
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- How to configure backup image when upgrading a firmware on TP-Link Smart/Managed Switches using the new GUI?
- How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI?
- How to configure Getting Time from NTP Server on TP-Link Smart & Managed Switch?
- Why are some functions lost after I log in to the switch?
- How to configure the default gateway of the smart and managed switches using the old GUI?
- How to configure the default gateway of the smart and L2 managed switches using the new GUI?
- How to change the IP address of the smart and managed switches using the old GUI and CLI?
- How to change the IP address of the smart and L2 managed switches using the new GUI and CLI?
- How to configure LACP on our Smart/ Managed Switch?
- Do you still have any doubt about the effect of QoS on the Switch of TP-Link?
- How to build up an 802.1X access authentication system using TP-Link switch?
- Cum să alegi un switch PoE?
- How to configure MAC ACL on Smart/Managed switch?
- How to Configure Port Isolation Function on Our Layer 2 Manage switches through Web Browser?
- Why the Firmware Version Does Not Change after Upgrading in T Series Switches?
- How to Block Unknown Devices to Access the Switch by Using IP Source Guard
- How to Block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- How to limit the port rate of the incoming traffic via ACL function?
- How to configure 802.1q VLAN on Smart Switches?
- How to Configure Port Mirror on TP-Link Smart Switches and L2 Managed Switches?
Firmware
O actualizare firmware poate rezolva problemele pe care versiunea anterioară a firmware-ului le poate avea și îmbunătăţeşte performanțele curente.
Pentru Actualizare
IMPORTANT: Pentru a preveni o actualizare efectuată greşit, te rugăm să citeşti procesul de actualizare, înainte de a continua.
- Verifică versiunea hardware a dispozitivului pentru versiunea de firmware corespunzătoare. O actualizare de firmware greșită poate duce la deteriorarea dispozitivului și anularea garanției. (În mod normal, v1.x = V1) Cum pot afla versiunea hardware a unui dispozitiv TP-Link?
- NU actualiza firmware-ul care nu este pentru regiunea ta. Apăsă aici pentru a alege regiunea și descărcă versiunea de firmware cea mai potrivită. (De exemplu. Firmware-ul UE și US sunt pentru diferite versiuni hardware)
- NU opri alimentarea dispozitivului în timpul procesului de actualizare, deoarece poate provoca deteriorarea permanentă a produsului.
- NU efectua procedura de upgrade firmware prin conexiune wireless cu excepția cazului în care dispozitivul TP-Link are doar conexiune wireless.
- Este recomandat să opreşti toate aplicațiile cu acces la Internet de pe computer, sau pur și simplu deconectați Internet-ul de la dispozitiv înainte de actualizare.
- Utilizează un software de decompresie WinZIP sau WinRAR pentru a extrage fișierul descărcat, înainte de actualizare.
T1500-28PCT(UN)_v3_190424 | |||
---|---|---|---|
Data publicării: 2019-07-25 | Limba: Engleză | Dimensiune Fişier: 8.86 MB | |
|
T1500-28PCT(UN)_V3_180530 | |||
---|---|---|---|
Data publicării: 2018-06-22 | Limba: Engleză | Dimensiune Fişier: 7.60 MB | |
|
T1500-28PCT(UN)_V3_180511 | |||
---|---|---|---|
Data publicării: 2018-06-01 | Limba: Engleză | Dimensiune Fişier: 7.60 MB | |
|
Utilizarea versiunilor firmware terțe în produsele TP-Link
Anumite versiuni de firmware pentru produsele TP-Link pot fi înlocuite cu versiuni firmware dezvoltate de terțe părți, de exemplu DD-WRT. TP-Link nu oferă suport tehnic și nu garantează performanța și stabilitatea versiunilor de firmware dezvoltate de terțe părți. Defecțiunile produselor cauzate de utilizarea unui firmware dezvoltat de o terță parte conduce la pierderea garanției.
Cod open source pentru programatori (GPL)
Următoarele informații sunt pentru programatori și nu sunt necesare pentru majoritatea utilizatorilor casnici TP-Link.
Produsele TP-Link conțin parțial cod software dezvoltat de către terți, inclusiv codul software supus GNU General Public Licence ("GPL"), Versiunea 1/Versiunea 2/Versiunea 3 sau GNU Lesser General Public License ("LGPL"). Ai dreptul să utilizezi software-ul respectiv dacă respecți termenii licenței GPL.
Ai posibilitatea să examinezi, să listezi și să descarci respectivii termenii ai licenței GPL de aici. Vei primi codurile sursă GPL ale software-ului respectiv utilizat în produsele TP-Link pentru a descărca direct și informații suplimentare, inclusiv o listă a software-ului TP-Link, care conține cod software GPL sub Centrul coduri GPL.
Programele respective sunt distribuite FĂRĂ NICI O GARANȚIE; chiar fără garanția implicită de COMERCIALIZARE sau de POTRIVIRE PENTRU UN ANUMIT SCOP. A se vedea, respectiva Licență Publică Generală GNU pentru mai multe detalii.
MIBs Files
Data publicării: 2019-05-13 | Limba: Engleză | Dimensiune Fişier: 205.81 KB |
Sistem de Operare: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
Cod GPL
Emulatoare
Versiune Firmware |
Working Mode |
Limba |
|
---|---|---|---|
180330 |
- |
Engleză |
Q&A
- Supported Public MIBs for TP-Link Switches
- Q&A_Ethernet Switching
- Q&A_Basic Configuration
- Q&A_Hardware
- Q&A_Interface and Device Management
- Q&A_Selecting Mounting Brackets
Documente utile
- Conguring SNMP & RMON
- Key Points of Managing the Switch via SNMP
- Access Rights of Different User Account Types
- Managing System
- Configuration Guide for Accessing the Switch Securely
- Configuring Access Security
- Accessing the Switch
- Configuring Layer 2 Multicast
- Configuring System Logs
- Configuring DLDP
- Configuring Port Security
- Configuring DoS Defend
- Configuring IPv6 IMPB
- Configuring IPv4 IMPB
- Configuring DHCP Filter
- Configuring ACL
- Configuring AAA
- Configuring 802.1x
- Configuring Spanning Tree
- Configuring Protocol VLAN
- Configuring MAC VLAN
- Configuring GVRP
- Mirroring Traffic
- Monitoring Traffic
- Monitoring the System
- Managing Physical Interface
- Configuring MAC Address
- Configuring LAG
- Configuring DHCP T1500&T1500G
- Diagnosing the Device & Network
- Configuring LLDP
- Configuring 802.1Q VLAN
- Configuring SNMP & RMON
- Configuring QoS_T1500&T1500G&T1600G
- Lightning Protection Guide