Download voor TL-R600VPN V4

Selecteer uw hardware versie:

V4

>Hoe vind ik de hardware versie van een TP-Link product?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Product Overview

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    Hoe vind ik de hardware versie van een TP-Link product?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
TL-R600VPN(UN)_v4_20190227
Publicatiedatum: 2019-03-22 Taal: Engels Bestandsgrootte: 9.98 MB

1. Update HTTPS encryption suite to TLS1.2
2. Support PCI DSS Scanning
3. Support enable and disable HTTPS Server.
4. Disable telnet function in default Setting.
5. Increase Apple Time Server to default NTP Server.
6. Optimize session limit function
7. Optimize the rules for modifying the MAC address of router when exporting or importing configuration file.
8. Fix the problem that the Rate Control function does not work after the router is restarted;
9. Fix the problem that the link backup function does not work when working in Timing mode;
10. Fix abnormal routing problem in Link Backup function;
11. Fix the problem that can not build  Client to LAN and LAN to LAN IPSec VPN when configuring the same Local Subnet.

TL-R600VPN(UN)_v4_20180530
Publicatiedatum: 2018-06-28 Taal: Engels Bestandsgrootte: 9.93 MB

Modifications and Bug Fixes:
1. Fix DHCP server will hang when modifying it after assigning IP to clients with the same name;
2. Enhance the Firewall module for VPN;
3. Fix bugs that it cannot establish L2TP over IPsec VPN connection when NAT exists;
4. Enhanced contents of System Log module;
5. Improve Dynamic DNS could create multi domain entries for one account;
6. Enhance the stability and speed up the dial process of WAN;
7. Add multi WANs selection for NAT/Policy Routing/primary WAN of Link Backup;
8. Add Only, Priority two modes for Policy Routing feature;
9. Add two sub-modes of Failover mode for Link Backup feature;
10. IP-MAC Binding entries will no longer take effect when ARP Spoofing Defense is disabled. 
Notes:
For TL-R600VPN V4.0

TL-R600VPN(UN)_V4_20180126
Publicatiedatum: 2018-02-28 Taal: Engels Bestandsgrootte: 9.90 MB

Modifications and Bug Fixes
1. Fix the problem of static routing can't work via LAN interface.
2. Fix the DNS or routing table problem when using the Link Backup.
3. Fix the problem of traffic can't be transfered from LAN to WAN after changing LAN IP and rebooting router.
4. Fix the problem of L2TP over IPSec VPN might be down when transmitting large files via VPN tunnel.
5. Fix the problem of Save button may fail when using remote control. 
6. Fix the problem of WAN1 traffic statistics can't work when the IPTV enabled.
7. Enhanced the stability of the router.
8. Reduce the time from WAN interface get IP to get to the internet.
9. Add the function of importing all at the page of ARP scaning.
10. Add conflict detection between VPN pool and DHCP pool;

Gebruik van Firmware van Derde Partijen in TP-Link Producten 

Sommige officiële firmware voor TP-Link producten kunnen vervangen worden door firmware van derde partijen, zoals DD-WRT. TP-Link is niet verplicht hier onderhoud of ondersteunig op te bieden en garandeert ook niet prestaties of stabiliteit van firmware van een derde partij. Schade aan het product door gebruik van firmware van een derde partij zal de garantie doen vervallen. 

Open Source Code voor Programmeerders (GPL)

 

Houd er rekening mee dat: De producten van TP-Link deels software codes bevatten van derde partijen, inclusief software codes naar de GNU General Public Licence (“GPL“), Versie 1/Versie 2/Versie 3 of GNU Lager General Public License ("LGPL"). U kunt de betreffende software voorwaarde gebruiken in lijn met de GPL licentievoorwaarden.

U kunt de betreffende GPL licentievoorwaren hier bekijken, printen en downloaden. U vindt de download van de GPL source codes van de betreffende software in een TP-Link product en meer informatie, inclusief een lijst met TP-Link software voorzien van GPL software codes, onder GPL Code Center.

De betreffende programma's zijn uitgegeven ZONDER ENKELE GARANTIE; Zelfs ZONDER de impliciete garantie van VERKOOPBAARHEID of GESCHIKTHEID VOOR EEN BEPAALDE DOEL. Zie de betreffende GNU See the respective GNU Algemene Openbare Licentie voor meer details.

Emulatoren

Firmwareversie
Working Mode
Taal
171128
-
Engels
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: