What does Lower PLC-to-VDSL interference Mode do on powerline adapters?
55928 Lower PLC-to-VDSL interference Mode is supported by MIMO powerline adapters only, such as series-8 and series-9. Actually, it will reduce the interference in circuits via disabling MIMO mode, so it may reduce the data transfer rate. Powerline products may interfere with devices such as lighting systems that have a dimmer switch or a touch-sensitive on/off feature, short wave radios, cable television system, VDSL devices, speakers, or other Powerline devices that do not follow the HomePlug AV/AV2 standard. Enable it will be helpful.
This mode is disabled by default, if you want to enable it, follow the steps below:
Note: If the tpPLC utility hasn’t been installed yet, please refer to How to prepare for using the tpPLC Utility (new logo)?
1. Open the utility, move your mouse over a powerline adapter, and click the 
(Advanced) icon.
2. Go to the Mode page and enable the Lower PLC-to-VDSL interference Mode.
해당 FAQ가 유용했나요?
여러분의 의견은 사이트 개선을 위해 소중하게 사용됩니다.