Deco Setup Walkthrough(For Deco X20/X60/X90/P9/M4/S4/E4/W2400 etc)

When You Set Up
Updated 12-18-2023 09:09:15 AM 578186
This Article Applies to: 

Note: Features available in Deco may vary by model and software version. All steps and images described here are only examples and may not reflect your actual Deco experience.

Before you start

1. To make sure the setup process can carry on smoothly, please disable the Power-Saving mode on the phone.

2. For iOS14 and above, enabling the Local Network is a MUST to complete the configuration process.

The Deco can only be set up through the Deco app, which is available on Android and iOS.

Here we take Deco X60 for example.

1. Go to Google Play or the App Store to download the Deco app. Install the Deco app on your Android or iOS smartphone or tablet.

https://static.tp-link.com/upload/faq/image-20221020185429-66_20221020105437z.png

2. Open the Deco app. Log in or sign up to set up a TP-Link ID.

Note: If you already have a TP-Link Cloud account, you can log in with your account.

https://static.tp-link.com/upload/faq/image_20221020105649c.png

3. Tap Let’s begin.

https://static.tp-link.com/upload/faq/image_20221020105700k.png

4. Select your Deco model.

https://static.tp-link.com/upload/faq/image_20221020105715v.png

5. Unpack the contents of the box. Once you verify you have everything, go to the next step.

https://static.tp-link.com/upload/faq/image_20221020105723h.png

6. Power off your modem and remove the backup battery if it has one.

https://static.tp-link.com/upload/faq/image_20221020105730j.png

7. Connect one of your Deco units to your modem and power on both devices.

https://static.tp-link.com/upload/faq/image_20221020105745m.png

Connect Ethernet cable to your Deco’s one of the WAN/LAN ports from the modem/modem router like Pic 1 or the Ethernet port on the wall like Pic 2.

Pic 1

Pic 2

8. Wait for the ‘Internet’ light to be stable on your modem.

https://static.tp-link.com/upload/faq/image_20221020105754a.png

9. Wait until Deco’s LED light pulses blue.

Note: If the LED is not pulsing blue, press the RESET on Deco for one second, the LED will turn to yellow. Just wait for about 2 minutes until the LED turn to pulsing blue and go on.

https://static.tp-link.com/upload/faq/image_20221020105805w.png

10. Connect your phone to the Deco’s default SSID printed on the bottom label (such as Deco_XXXX).

Note: Some phones may connect to the default SSID automatically. The Deco app will notify it found the Deco.

https://static.tp-link.com/upload/faq/image_20221020105814m.png

11. Assign your connected Deco to a room. The location will be also used as this Deco’s name.

https://static.tp-link.com/upload/faq/image_20221020105822z.png

12. Select the connection type such as PPPoE, Dynamic IP, and Static IP, and fill in VLAN ID if ISP required, which generally provided by ISP. The Common connection types of regular ISPs we collected is for reference only.

For connection type: you may choose Dynamic IP when the Deco wired to a main router/Modem Router like Pic 1, or you are suggested to confirm with ISP if your TP-Link Modem is wired to ISP/ a bridge Modem directly like Pic 2

Pic 1

Pic 2

https://static.tp-link.com/upload/faq/image_20221020105832q.png

If ISP required a VLAN ID, please get the VLAN ID from your ISP and enter it follow the steps:

  1. Click on IPTV/VLAN Settings, enable IPTV/VLAN, and click on Mode, if your ISP is in the list, tap your ISP name and the VLAN ID will enter on the VLAN page automatically. Here we take "Australia-NBN" for example.

https://static.tp-link.com/upload/faq/image-20221026112709-157_20221026032722r.png https://static.tp-link.com/upload/faq/image-20221026112709-158_20221026032722v.png https://static.tp-link.com/upload/faq/image-20221026112709-159_20221026032722c.png

  1. If your ISP is not in the list, please select Custom, then enter the Internet VLAN ID and Internet VLAN Priority according to the information provided by your ISP, and click on Save to finish the setup process.

If your ISP does not provide Internet VLAN Priority, you can enter 0.

https://static.tp-link.com/upload/faq/image-20221026112709-160_20221026032722x.png https://static.tp-link.com/upload/faq/image-20221026112709-161_20221026032723s.png

13. Create your Wi-Fi network name and password.

https://static.tp-link.com/upload/faq/image_20221020105842m.png

14. Connect your phone/tablet to the Deco’s Wi-Fi.

https://static.tp-link.com/upload/faq/image_20221020105851y.png

15. Setup complete. Now you can connect all your devices to the Deco network.

https://static.tp-link.com/upload/faq/image_20221020105900p.png

16. If you have other Deco units in the same package, just plug in these Decos and they will be added to the network within 2 minutes.

https://static.tp-link.com/upload/faq/image_20221020105907z.png

Related FAQs

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

Setup Videos

How to Set up the TP-Link Deco M4 Mesh Wi-Fi System

How to Set up TP-Link Whole Home Mesh WiFi 6 System(Deco X90)

Community

TP-Link Community

Still need help? Search for answers, ask questions, and get help from TP-Link experts and other users around the world.

Visit the Community >

From United States?

Get products, events and services for your region.