Contents

Objective

Requirements

Configuration

VIGI Web Management Page

Dynamic IP

Static IP

VIGI VMS

Dynamic IP

Static IP

VIGI Config Tool

Dynamic IP

Static IP

Conclusion

Objective

Wired network configuration is a common function of VIGI Camera. This article will take VIGI C345S as an example to explain how to configure wired network parameters.

Requirements

• VIGI Camera
• Optional：VIGI VMS / VIGI Config Tool / VIGI web management page

Configuration

VIGI camera support configure network parameters with VIGI VMS/VIGI Config Tool/ VIGI web management page.

VIGI Web Management Page

Step 1. Access to VIGI Camera web management page with VIGI Camera IP Address.

Step 2. Go to Settings > Network Settings > Connect.

Step 3. Choose the IPv4 Mode. There are two IPv4 Modes you can choose.

Dynamic IP

Switch IPv4 Mode to “Dynamic IP”, and save configuration. Then your VIGI camera will get an IP address automatically from DHCP server.

Static IP

Switch IPv4 Mode to “Static IP”. Configure the information, such as: IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway, Preferred DNS, Alternative DNS and MTU. Then save the settings.

VIGI VMS

Step 1. Access to VIGI VMS. Go to Devices, choose the Site, then choose device which need to be configured, and click “Edit”.

Step 2. Go to Network > Internet Connection.

Step 3. Choose the IPv4 Mode. There are two IPv4 Modes you can choose.

Dynamic IP

Switch IPv4 Mode to “Dynamic IP”, and save configuration. Then your VIGI camera will get an IP address automatically from DHCP server.

Static IP

Switch IPv4 Mode to “Static IP”. Configure the information, such as: IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway, Preferred DNS, Alternative DNS and MTU. Then save the settings.

VIGI Config Tool

Step 1. Start VIGI Config Tool, choose device which need to be configured, and click “Edit”.

Step 2. Go to Network > Internet Connection.

Step 3. Choose the IPv4 Mode. There are two IPv4 Modes you can choose.

Dynamic IP

Switch IPv4 Mode to “Dynamic IP”, and save configuration. Then your VIGI camera will get an IP address automatically from DHCP server.

Static IP

Switch IPv4 Mode to “Static IP”. Configure the information, such as: IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway, Preferred DNS, Alternative DNS and MTU. Then save the settings.

Conclusion

You have learned how to configure wired network parameters of VIGI camera.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.