2.0_1499761906353c.jpg)
2.0_1499761207303z.jpg)
2.0_1499760626857b.jpg)
_3.0-1_1565765475198j.jpg)
3.2_normal_1594974261923z.png)
1.0_1530001947920p.jpg)
5.0_B_1573712239518f.jpg)
12.0_1516616402231o.jpg)
2.0_1499760514839i.jpg)
2.0-B_normal_1613632002636e.png)
4.0-F_normal_1593323206680k.png)
4.0-F_normal_1593323197059j.png)
4.0-F_normal_1593323223226a.png)
4.0-F_normal_1593323303811i.png)
1.0_normal_1592202841088s.png)
3.0_normal_1592202926635e.png)
1.0_02_normal_1592202777573m.png)
1_normal_1593077382117b.png)
2.0_02_normal_1592202820692y.png)
1_normal_1593077392336e.png)
1.0_normal_1592202397383a.png)
1.0_Overviews_normal_1594869465633b.png)
1.0_1507530505121l.jpg)
1.0_1559627715476s.jpg)
-2.0_1515461273586w.jpg)
-4_1499778161810b.jpg)
Download for TL-SG2008
>How to find the hardware version on a TP-Link device?
- Преглед
3.0_overview_normal_1599720750009t.png)
JetStream 8-Port Gigabit Smart SwitchFAQs
- What should I do when the Omada Software Controller (V4) fails to discover the devices?
- What should I do if I cannot access the web management page of my TP-Link switch?
- How to test the Jumbo Frame pass-through feature on TP-Link switches?
- How to configure RSTP on TP-Link switches using the old GUI?
- How to configure OpenSSH 7.0(and above) to login smart and managed switches?
- How to change the IP address of the smart and managed switches using the old GUI and CLI?
- How to configure LACP on our Smart/ Managed Switch?
- How to configure MAC ACL on Smart/Managed switch?
- How to Block an illegal client with Certain IP address from getting access to the network using TP-Link Managed Switches
- What are the differences in features and application scenarios among various serial switches?
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
How to find the hardware version on a TP-Link device? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
| TL-SG2008(UN)_V3_20200730 | |||
|---|---|---|---|
| Published Date: 2020-09-15 | Language: English | File Size: 8.44 MB | |
|
|||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
Controller Software
The EAP Controller is used to manage multiple EAPs intensively.
| Published Date: 2020-11-03 | Language: English | File Size: 90.09 MB |
Operating System: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1
New Feature/Enhancement: 1. Support to import the SSL certificate of PFX format. 2. Support to create of up to 1000 sites. 3. Support arbitrary adjustment of logo display and closing logo. 4. Support to paste the IP address for everywhere there is IP setting. 5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller. 6. Support to print all unused voucher codes. 7. Support to delete the archived alert log and event log. 8. Support to export device list, client list, etc. in Export Data function. 9. Support to drag and drop card adjust the dashboard display. 10. Add the Hostname/IP setting which will be used for the controller URL in the notification email. 11. Add Past Connection page in the Insight menu. 12. Improve the MAP topology display.
Bug Fixed: 1. Fixed the bug that the Limited Online Users voucher code still can be used after expired. 2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function. 3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access. 4. Fixed the bug that the cutout logo will show a black background. 5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. |
||
Присъединете се към TP-Link общносттаTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.