How to set up VIGI Cameras

Configuration Guide
Updated 10-28-2024 07:29:25 AM 6048
This Article Applies to: 

Contents

Objective

Requirements

Introduction

Configuration via Web Management Interface

Configuration via VIGI APP

Configuration via VIGI Config Tool

Conclusion

Objective

VIGI Cameras can be managed and initialized through multiple ways. The most basic method is using the web management interface. The VIGI App comes in handy if the you only have a mobile phone. The VIGI Config Tool, on the other hand, is designed for batch initialization of VIGI cameras.

This article introduces the three initialization options.

Requirements

  • VIGI Camera
  • VIGI App
  • PC and VIGI Config Tool

Introduction

To initialize a VIGI Camera, you need to ensure the camera and the device used for configuration are on the same network segment. You can then set up your VIGI camera in one of the following methods.

Configuration via Web Management Interface

Step 1. Power on the camera and connect it to the network. Ensure that the PC is connected to the same network and then access the camera’s web management interface using its IP address.

Step 2. Configure the country/region, time zone, and language settings. The default language is English.

Initialize IPC page of VIGI devices.

Step 3. Set the management password for the device. The default username is "admin" and cannot be changed.

Set password page of VIGI devices.

Step 4. (Optional) Configure security questions and a password recovery email. You may skip this step.

Set security questions on the VIGI devices.

Step 5. Initialization is complete.

Initialization complete page of VIGI devices.

Configuration via VIGI App

If a PC is unavailable, you can quickly configure the camera via the VIGI App. Once you log in to the VIGI App with a TP-Link ID and connect your mobile device to the network, you can link the camera to the TP-Link ID.

Step 1. Log in to the VIGI App. For optimal connection, it is recommended to connect both the phone and VIGI Camera to the same network.

Step 2. If you only need to add specific devices, tap + in the upper right corner and select Scan/Add Device. Scan the QR code on the label of the device. To add all devices connected to the same Wi-Fi, select Auto Discover and scan all of the devices.

The location of the Add button in the VIGI App. The location of scanning QR Code  in the VIGI App. The page of searching for devices in the VIGI App.

Step 3. Ensure the camera is powered on, and its LED status light is flashing red and green. Tap Next.

Select the connection method in the VIGI App. Select the connection method in the VIGI App.

Step 4. Set the camera's password, time zone, and name.

Initialize VIGI cameras in the app. Initialize VIGI cameras in the app. Initialize VIGI cameras in the app.

Step 5. Click Next to add the device.

Add VIGI cameras in the app. Add VIGI cameras in the app.

Step 6. Once you hear a “ding-dong” sound, the device has been successfully added.

The VIGI Camera has been successfully added.

Configuration via VIGI Config Tool

If you have multiple VIGI Cameras to configure, you can use the VIGI Config Tool for batch setup. Note that all VIGI Cameras will adopt the same settings.

Step 1. Visit the TP-Link official website to download the VIGI Config Tool via this link.

Step 2. Install the VIGI Config Tool on a Windows PC and connect the PC and VIGI Cameras to the same network segment.

Step 3. Open the VIGI Config Tool and select all VIGI Cameras you want to configure.

Device List page in the VIGI Config Tool.

Step 4. Click Batch Action and select Batch Initialize.

Location of the Batch Initialize button in the VIGI Config Tool.

Step 5. Set the username and password for all devices in the batch. The default username is "admin" and cannot be changed.

Set password in the VIGI Config Tool.

Step 6. Configure the country/region, time zone, and other settings for all devices in batch.

Initialize devices in the VIGI Config Tool.

Step 7. Now you have completed the initialization process.

Conclusion

Now that you've finished configuring VIGI Camera.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

Чи була ця стаття корисною?

Ваш відгук допомагає вдосконалити цей сайт.

Recommend Products

From United States?

Get products, events and services for your region.