16-Port Gigabit Easy Smart Switch with 8-Port PoE+
- 16× 10/100/1000Mbps RJ45 ports
- Equipped with 8× PoE+ supported ports to transfer data and power over a single cable
- With a total PoE power budget of 150 W,* up to 30 W per port
- Works with IEEE 802.3af/at compliant devices, expanding home and office networks
- Simple network set-up on top of plug-and-play connectivity
- Web-based user interface and management utility simplify configuration
What This Product Does
How This Product Works
8 ports of TL-SG1016PE support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.
TL-SG1016PE has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 150 W, a priority will be arranged among the 8 PoE+ ports, at which point the system will cut off the power of the lowest-priority port.
Port Priority Function
Priority (port 1>port 2>port 3>port 4> port 5>port 6>port 7>port 8): This function will help protect the system if the system power becomes overloaded. For example, Port 1, 2, 3, 4, and 6 are using 30 W (maximum power per port is 30 W), the system power is 150 W in total (PoE max LED will be green if all PoE PDs power consumption is >= 150W). If there is an additional PD inserted to Port 5 with 20 W then the system will cut off Port 6 to protect the system, this means Port 1, 2 ,3, and 4 will use 120 W, and Port 5 will use 20 W, and no power will be supplied to Port 6.
Easy To Use
TL-SG1016PE is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-LINK TL-SG1016PE 16-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE+ is a great choice for expanding your home or office network.
*PoE budget calculations are based on laboratory testing. Actual PoE power budget is not guaranteed and will vary as a result of client limitations and environmental factors.
|Standards and Protocols||IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p|
|Interface||16× 10/100/1000 Mbps RJ45 PortsAUTO Negotiation/AUTO MDI/MDIX|
|Network Media||10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)EIA/TIA-568 100Ω STP (maximum 100m)100BASE-TX: UTP category 5, 5e cable (maximum 100m)EIA/TIA-568 100Ω STP (maximum 100m)1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m)EIA/TIA-568 100Ω STP (maximum 100m)|
|Physical Security Lock||Yes|
|PoE Ports (RJ45)||Standard: 802.3 af/at compliantPoE Ports: Port 1 to Port 8PoE Power Budget: 150 W|
|Dimensions ( W x D x H )||11.6×7.1×1.7 in (294×180×44 mm)|
|Mounting||Rack Mountable/ Desktop|
|Max Power Consumption||8.07 W (110 V/ 60 Hz with no PD connected)177.67 W (110 V/60 Hz with 150 W PD connected)|
|Max Heat Dissipation||27.52 BTU/h (with no PD connected)605.85 BTU/h (with 150 W PD connected)|
|Switching Capacity||32 Gbps|
|Packet Forwarding Rate||23.8 Mbps|
|MAC Address Table||8K|
|Packet Buffer Memory||4.1 Mbit|
|Jumbo Frame||10 KB|
|Quality of Service||Support Port-Based/802.1p/DSCP prioritySupport 4 priority queuesRate LimitStorm Control|
|L2 Features||IGMP Snooping V1/V2/V3Static Link AggregationPort MirroringCable DiagnosticsLoop Prevention|
|VLAN||Supports up to 32 VLANs simultaneously (out of 4K VLAN IDs)MTU/Port/Tag VLAN|
|Management||Web-based GUIEasy Smart Configuration UtilityPoE Auto Recovery|
|Certification||FCC, CE, RoHS|
|Package Contents||TL-SG1016PEPower CordInstallation GuideResource CDRackmount KitRubber Feet|
|System Requirements||Microsoft® Windows® for running Utility|
|Environment||Operating Temperature: 0–50 ℃ (32–122 ℉)Storage Temperature: -40–70 ℃ (-40–158 ℉)Operating Humidity: 10–90% non-condensingStorage Humidity: 5–90% non-condensing|