Brief Introduction of Test Mode

Q&A of functional explanation or specification parameters
Updated 02-07-2018 07:42:51 AM 64433
This Article Applies to: 

What is Test Mode?

Test Mode is a Region option which can extend the Wi-Fi coverage of the Pharos devices. The selected Region determines the available channels and max transmit power according to local laws and regulations. When Test Mode is selected, a wider frequency range and higher transmit power are available than what the local laws and regulations limit.

For example, due to CE restrictions, the 2.4GHz device should work only in the wireless channel which is from 2412MHz to 2472MHz. With Test Mode enabled, the wireless channel can be extended from 2312MHz to 2572MHz.

The comparison between test mode and CE/FCC restrictions is shown as below.

 

Region

Channel

Max Transmit power

2.4GHz

5GHz

2.4GHz

5GHz

Test Mode

2312MHz~2572MHz

53 channels

4920MHz~6100MHz

237 channels

CPE210

27dBm

CPE510

23dBm

CPE220

30dBm

CPE520

27dBm

FCC

2412MHz~2462MHz

11 channels

5180MHz~5240MHz

5745MHz~5825MHz

9 channels

CPE210

27dBm

CPE510

23dBm

-

-

CE

2412MHz~2472MHz

13 channels

5500MHz~5700MHz

11 channels

CPE210

11dBm

CPE510

17dBm

-

-

 

In what circumstances can Test Mode be used?

Non-standard channels and too large transmit power may violate the local laws and regulations. So Test Mode can be used only when the local laws and regulations do not have the limitations.

Which Pharos outdoor products do support Test Mode?

Only Pharos outdoor products of UN version support Test Mode. Due to CE/FCC restrictions, you cannot change the region option for Test Mode on the devices of EU/US version, whose Test Mode is locked and concealed on the setting page.

Is this faq useful?

Your feedback helps improve this site.

Recommend Products

From United States?

Get products, events and services for your region.