Téléchargement pour TL-SG3428X
- Récapitulatif Produit
Switch administrable JetStream L2+ 24 ports Gigabit avec 4 emplacements SFP+ 10GE Firmware / Micrologiciel
Une mise à jour du micrologiciel (Firmware) interne des produits peut résoudre les problèmes de la version précédente et améliorer les performances du produit.
Pout procéder
IMPORTANT: Pour éviter les échecs de mise à jour, veuillez lire ce qui suit avec attention, avant de procéder ; en cas de doute n’hésitez pas à contacter le support technique TP-Link.
- Il est recommandé de télécharger les micrologiciels uniquement depuis le site Web TP-Link.fr. Si votre matériel a été commercialisé par une autre succursale TP-Link cliquez ici.
- Déterminez la version matérielle de votre produit TP-Link avant de rechercher les micrologiciels conçu pour cette version.
Un micrologiciel non spécifiquement conçu pour la version matérielle de votre produit peut endommager ce dernier et en annuler la garantie.
(Sauf spécifications contraires, les sous-versions matérielles acceptent les micrologiciels de la version principale : V2 = V2.0, V2.1, V2.x…
en revanche V1 ne peut recevoir les micrologiciels de V2, V3, Vx et inversement) - Comment trouver la version matérielle d’un produit TP-Link ?
- Ne coupez PAS l'alimentation électrique du produit TP-Link pendant sa mise à jour, cela pourrait l’endommager de façon permanente.
- Ne procédez PAS à la mise à jour du micrologiciel via une connexion Wi-Fi (sauf bien entendu pour les produits dépourvus de connexion Ethernet).
- Il est très fortement recommandé de procéder à la mise à jour depuis un ordinateur non connecté à internet (uniquement durant le temps de cette mise à jour).
- Utilisez un logiciel (au cas où votre système d’exploitation n’intègre pas cette fonctionnalité) pour extraire le micrologiciel du fichier (.zip ou .rar) que vous aurez téléchargé depuis notre site.
- Aucun micrologiciel n’est exécutable directement il faut passer par l’interface du produit ou de l’utilitaire associé (cf. mode d’emploi du produit) pour procéder à la mise à jour.
| TL-SG3428X(UN)_V1_20200924 | |||
|---|---|---|---|
| Date de publication: 2021-03-03 | Langue: Anglais | Taille du fichier: 14.88 MB | |
|
|||
| TL-SG3428X(UN)_V1_20201016 | |||
|---|---|---|---|
| Date de publication: 2021-02-26 | Langue: Anglais | Taille du fichier: 14.88 MB | |
|
|||
Utiliser un firmware tiers non développé ni distribué par TP-Link dans les produits TP-Link
Certains firmwares officiels de produits TP-Link peuvent être remplacés par des firmwares tiers tels que : OpenWrt, DD-WRT, LEDE, Gargoyle etc.
TP-Link n'a aucune obligation de support concernant ces micrologiciels, et ne garantit en aucun cas performances et stabilité des produits qui seraient pourvus de ces firmwares.
L'altération fonctionnelle d’un produit consécutif à l’installation et/ou à l'utilisation d'un firmware tiers annulera de fait la garantie de ce produit.
Accès au code source soumis à licence GPL
Remarque : Les produits de TP-Link contiennent des portions de logiciel développées par des tiers, ce qui inclus du code soumis à la licence GNU (GPL), Version 1, Version 2, Version 3 ou GNU Lesser General Public License (" LGPL "). Vous pouvez utiliser le code concerné à condition de respecter les termes de la licence.
Vous pouvez consulter, imprimer et télécharger les conditions de la licence GPL ici. Vous trouverez les codes source GPL des logiciels respectifs utilisés dans les produits TP-Link pour le téléchargement direct et d'autres informations, y compris une liste des logiciels TP-Link contenant du code logiciel soumis à licence GPL dans le Centre de code GPL.
Les programmes respectifs sont distribués SANS AUCUNE GARANTIE ; sans même la garantie implicite de QUALITÉ MARCHANDE ou d'ADÉQUATION À UN USAGE PARTICULIER. Voir la licence publique générale GNU respective pour plus de détails.
Fichiers MIB
| Date de publication: 2021-03-24 | Langue: Anglais | Taille du fichier: 197.41 KB |
Système d'exploitation: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
Contrôleur Logiciel
Le contrôleur EAP permet de gérer plusieurs points d'accès EAP de manière intensive.
| Date de publication: 2021-02-09 | Langue: Anglais | Taille du fichier: 90.12 MB |
Système d'exploitation: Windows 7/8/10/Server |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2 Gateway: TL-R605_V1, TL-ER7206_V1
Bug Fixed: 1. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time. 2. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A. 3. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time. 4. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller. 5. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect. 6. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list. 7. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics. 8. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID. 9. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. |
||
| Date de publication: 2021-02-09 | Langue: Anglais | Taille du fichier: 59.91 MB |
Système d'exploitation: Win2000/XP/2003/Vista/7/8/8.1/10/Mac/Linux |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2 Gateway: TL-R605_V1, TL-ER7206_V1
Bug Fixed: 1. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time. 2. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A. 3. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time. 4. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller. 5. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect. 6. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list. 7. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics. 8. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID. 9. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. 5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself. 6. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian. |
||
| Date de publication: 2021-02-09 | Langue: Anglais | Taille du fichier: 58.43 MB |
Système d'exploitation: Ubuntu 14.04/16.04/17.04/18.04/Debian |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1, TL-SG3452P_V1, TL-SG3452_V1, TL-SG3428MP_V1, TL-SG3210_V3, TL-SG2218_V1, TL-SL2428P_V4.2 Gateway: TL-R605_V1, TL-ER7206_V1
Bug Fixed: 1. Fixed the bug that the IPSec and L2TP over IPSec VPN cannot be set on the same WAN port at the same time. 2. Fixed the bug that the speedtest in the dashboard may display general error and internet Capacity and Gateway are still displayed as N/A. 3. Fixed the bug that we may not be able to re-adopt the Mesh AP if we failed to adopt it with the wrong password for the first time. 4. Fixed the bug that the wireless client will be displayed as a wired client (LAN) on the controller. 5. Fixed the bug that the controller's band steering range is inconsistent with the actual supported range of EAP, resulting in the configuration not taking effect. 6. Fixed the bug that the wired clients that have passed portal authentication may display 0 traffic data in the Authorized Clients list. 7. Fixed the bug that the wired clients that have passed portal authentication may have lower traffic statistics. 8. Fixed the bug that the Controller may show a general error if we forget an EAP and then delete an SSID. 9. Fixed the bug that the wired clients that have passed RADIUS portal authentication may have higher RADIUS accounting traffic statistics.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. 5. Support 64-bit Linux operating system including Ubuntu 14.04/16.04/17.04/18.04/Debian. 6. You may need to save the backup file and uninstall the old Omada Controller before installing this software. |
||
| Date de publication: 2020-12-11 | Langue: Anglais | Taille du fichier: 90.11 MB |
Système d'exploitation: Win7/8/10/Server |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller. Supported device models and firmware:
New Feature/Enhancement: Bug Fixed: |
||
| Date de publication: 2020-11-10 | Langue: Anglais | Taille du fichier: 59.89 MB |
Système d'exploitation: Ubuntu 14.04/16.04/18.04, CentOS 6.x/7.x, Fedora 20 (or above) and Debian 8/9 |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1
New Feature/Enhancement: 1. Support to import the SSL certificate of PFX format. 2. Support to create of up to 1000 sites. 3. Support arbitrary adjustment of logo display and closing logo. 4. Support to paste the IP address for everywhere there is IP setting. 5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller. 6. Support to print all unused voucher codes. 7. Support to delete the archived alert log and event log. 8. Support to export device list, client list, etc. in Export Data function. 9. Support to drag and drop card adjust the dashboard display. 10. Add the Hostname/IP setting which will be used for the controller URL in the notification email. 11. Add Past Connection page in the Insight menu. 12. Improve the MAP topology display.
Bug Fixed: 1. Fixed the bug that the Limited Online Users voucher code still can be used after expired. 2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function. 3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access. 4. Fixed the bug that the cutout logo will show a black background. 5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to an earlier version. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. 5. Controller needs Java 8 and MongoDB 3.0-3.6 for running. And there are no built-in JRE and MongoDB, so you need to install them by yourself.
|
||
| Date de publication: 2020-11-03 | Langue: Anglais | Taille du fichier: 90.09 MB |
Système d'exploitation: Win2000/XP/2003/Vista/7/8/8.1/10 |
||
If you are planning to upgrade from the old controller(v3.2.10 or below) to this version, please read the Omada Controller Upgrade Guide in the installation package before upgrading the controller.
Supported device models and firmware: EAP: EAP110_V4 3.20.0 Build 20200525 Rel. 36899 and above EAP115_V4 3.20.0 Build 20200525 Rel.36931 and above EAP225_V3 2.20.0 Build 20200422 Rel. 70513 and above EAP245_V3 2.20.0 Build 20200423 Rel. 36779 and above EAP115-Wall_V1 1.20.0 Build 20200509 Rel. 63986 and above EAP225-Wall_V2 1.20.0 Build 20200422 Rel. 70504 and above EAP110-Outdoor_V3 3.20.0 Build 20200511 Rel. 33388 and above EAP225-Outdoor_V1 1.20.0 Build 20200422 Rel. 70543 and above EAP265 HD_V1, EAP230-Wall_V1, EAP235-Wall_V1, EAP660 HD_V1, EAP620 HD_V1 Switch: TL_SG3428MP_V1, TL_SG3428_V1, TL-SG2210MP_V1, TL-SG2210P_V3.20, TL-SG2428P_V1, TL-SG2008P_V1, TL-SG2008_V3, TL-SG3428X_V1, TL_SG3428XMP_V1, TL-SG3210XHP-M2_V1 Gateway: TL-R605_V1, TL-ER7206_V1
New Feature/Enhancement: 1. Support to import the SSL certificate of PFX format. 2. Support to create of up to 1000 sites. 3. Support arbitrary adjustment of logo display and closing logo. 4. Support to paste the IP address for everywhere there is IP setting. 5. Support to restore the site privilege setting for cloud users when backup and restore for the same controller. 6. Support to print all unused voucher codes. 7. Support to delete the archived alert log and event log. 8. Support to export device list, client list, etc. in Export Data function. 9. Support to drag and drop card adjust the dashboard display. 10. Add the Hostname/IP setting which will be used for the controller URL in the notification email. 11. Add Past Connection page in the Insight menu. 12. Improve the MAP topology display.
Bug Fixed: 1. Fixed the bug that the Limited Online Users voucher code still can be used after expired. 2. Fixed the bug that cannot use the website subpath in The Promotional URL settings of portal function. 3. Fixed the bug that cannot import the picture in MAP and Portal settings if access controller with cloud access. 4. Fixed the bug that the cutout logo will show a black background. 5. Fixed the bug that auto backup and schedule function cannot work if the time zone uses summertime.
Notes: 1. Omada SDN Controller can configure and manage only certain devices with supported firmware. You need to make sure your device is compatible with Omada SDN Controller. 2. If you are using Omada Controller and plan to upgrade to this version, please follow the procedure of Omada Controller Upgrade Guide. 3. Once upgraded to this version of Omada Controller, you will be NOT able to downgrade to version 3.2.10 or below. 4. This version of the controller is applied to Omada APP of version 3.0.X or above. |
||
Newsletter TP-LinkTP-Link prend votre vie privée au sérieux. Pour plus de détails sur la politique de confidentialité de TP-Link, veuillez consultez la page suivante Politique de confidentialité de TP-Link .