Stáhnout pro OC200
- Product Overview
Cloudový kontroler OmadaSetup Video
-
How to setup the OC200 via a web browser
This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
• Connect the OC200 to your local network.
• Get ready for setup.
• Create a TP-Link ID.
• Log into your TP-Link ID.
• Add the OC200 to your TP-Link ID.
• Follow the wizard to set up the OC200.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Cloud Controller OC200
• Mass EAPs (usually more than three)
Learn More
-
How to setup the OC200 via your mobile phone
This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
• Connect the OC200 to your local network.
• Get ready for setup.
• Create a TP-Link ID.
• Log into your TP-Link ID.
• Add the OC200 to your TP-Link ID.
• Follow the wizard to set up the OC200.
THIS VIDEO APPLIES TO:
• All TP-Link EAP models (except EAP120 and EAP220)
• Omada Cloud Controller OC200
• Mass EAPs (usually more than three)
Learn More
-
A Quick Overview of EAP Management Methods
This video introduces how to choose the optimum method to manage TP-Link EAPs in your scenario.
Here are 3 most common scenarios and their corresponding methods:
• Manage 1 or 2 EAPs locally
• Manage 3 or more EAPs locally
• Manage 3 or more EAPs remotely
When choosing the method, consider the following questions:
1. Standalone Mode or Controller Mode?
2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Omada Software Controller?
3. What kind of user interface will you use, a web browser or the Omada app?
Learn More
FAQ
- How to manage EAPs in different VLANs using Omada Controller? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with DHCP Option138)? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via NAT Port Forwarding for Controller Host with EAP Discover Utility)? (Old UI)
- How to manage EAPs at different sites across Internet using Omada Controller (via VPN Tunnel with EAP Discover Utility)? (Old UI)
- How to manage EAPs in different subnets using Omada Controller (via DHCP option 138)? (Old UI)
- How to manage EAPs in different subnets using Omada controller (via EAP Discover Utility)? (Old UI)
- Frequently asked questions of EAP Series Access Points
- Frequently Asked Questions about EAP Mesh Network
- Q&A for TP-Link Omada App
- How to set Access Control to create guest SSID on Omada Controller/EAP
- How to configure the WLAN Group function on the Software Controller (or OC200)
- How to back up and restore the configuration and data of your Software Controller (or OC200)
- How to configure the portal function on Omada Controller?
- What Should I Do if Omada Software Controller OC200 Cannot Adopt Omada EAP
- Will the Configuration Still Work with EAPs When the Omada Controller Goes Offline?
- How to Configure Voucher Authentication on Omada Controller?
- Do I need to keep controller running when using portal authentication?
- Source code template for External Web Portal (Controller 3.0.5 or below)
- The Requirements of Establishing an External Portal Server (above Omada Controller 2.6.0)
- How to migrate the configuration files from Omada Software Controller into OC200?
- Guidance and precautions for the upgrade and data migration of Omada Controller/OC200
- How to Configure Omada Controller as a Windows Service（above Controller 2.5.4）
- Configure rogue AP detection on EAP/Omada Controller
- How to Configure Load Balance Omada Controller?
- How to Configure Reboot schedule and Wi-Fi Scheduler function of Omada Controller?
- How to Configure Band Steering on TP-Link Omada Controller?
- How to configure Multiple SSIDs with Multiple Subnets on EAP products
Firmware
A firmware update can resolve issues that the previous firmware version may have and improve its current performance.
To Upgrade
IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process
- Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
- Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. （Normally V1.x=V1）
Jak zjisti hardwarovou verzi vašeho TP-Link zařízení? - Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
- To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
- It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
- Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
| OC200(UN)_v1_1.2.0_Build_20190927 | |||
|---|---|---|---|
| Datum vydání: 2019-11-15 | Jazyk: Angličtina | Velikost souboru: 104.13MB | |
|
|||
| OC200(UN)_v1_1.2.0_Build_20190823 | |||
|---|---|---|---|
| Datum vydání: 2019-10-14 | Jazyk: Angličtina | Velikost souboru: 104.14MB | |
|
|||
| OC200(UN)_V1_1.1.1 Build 20190419 | |||
|---|---|---|---|
| Datum vydání: 2019-05-15 | Jazyk: Angličtina | Velikost souboru: 107.65MB | |
|
|||
To Use Third Party Firmware In TP-Link Products
Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.
Open Source Code For Programmers (GPL)
Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.
You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.
The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.
GPL Code
Emulátory
Verze firmwaru |
Working Mode |
Jazyk |
|
|---|---|---|---|
181016(UN) |
- |
Angličtina |