Descarga para EAP660 HD V1.80

Elige una versión de hardware:


>¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?

IMPORTANT: Model and hardware version availability varies by region. Please refer to your TP-Link regional website to determine product availability.
Product Overview

Setup Video

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    More Fold

Preguntas Frecuentes


A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally Vx.0=Vx.6/Vx.8 (eg:V1.0=V1.6/V1.8);   Vx.x0=Vx.x6/Vx.x8 (eg:V1.20=V1.26/V1.28)
    ¿Cómo encontrar la versión del hardware en un dispositivo TP-Link?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.

EAP660HD(US)_V1.8_1.1.1 Build 20220118

Fecha de Publicación : 2022-07-06 Idioma: Inglés Tamaño del Archivo : 13.97 MB

This firmware fully adapts the Omada SDN Controller v5 but only compatible with Omada Controller v4.1.5 or above.

EAP660HD(US)_V1.8_1.1.0 Build 20211027

Fecha de Publicación : 2022-07-06 Idioma: Inglés Tamaño del Archivo : 13.93 MB

Recommended Controller Software Version: Omada Controller v4.1.5 or above

EAP660HD(US)_V1.8_1.0.6 Build 20210729

Fecha de Publicación : 2022-07-06 Idioma: Inglés Tamaño del Archivo : 12.80 MB

This firmware fully adapts the Omada SDN platform but only compatible with Omada Controller v4.1.5 or above.

If you are using an old Omada controller and plan to upgrade this firmware for EAP, you must upgrade the Omada Controller as well: Upgrade Guide


New Feature/Enhancement:

1. Add Auto Channel Deployment function (need to work with Cloud-Based Controller).

2. Add automatic Tx Power deployment function (need to work with Cloud-Based Controller).

3. Add AP spectrum scanning function.

4. Add AI Roaming function.

5. Add Daylight Saving Time.

6. Add Dynamic VLAN function.

7. Add past connections function to show the historical connection clients.

8. Add the list of client association time activities and client association activities.

9. Add the feature that when using Migration moving EAP to an invalid IP address of Omada Controller, the EAP will roll back.

10. Add support for displaying CPU utilization, memory utilization, and bandwidth-related configuration in the Standalone mode of the Omada APP.

11. SSH supports to write the Controller IP address to EAP. The command is: xsetctrladdr “controller IP:29810”.

12. Optimize the high resources using of Omada Controller when managing a large number of EAPs in batches.

13. Set the default SSID encryption mode as AES.

14. Optimize security vulnerabilities.


Bug fixed:

1. Fixed the bug that the “client detail log” may not be sent normally to log server.

2. Fixed the bug that we can set invalid VLAN ID in Management VLAN settings.

3. Fixed the bug that the wireless clients which install the Omada APP may disconnect from the 5G radio of EAP if we change the 2.4G channel or Tx power of this EAP in the Omada APP.

4. Fixed the bug that the EAP may reboot abnormally during firmware upgrading and cause the device to brick.

5. Fixed the bug that after changing the bandwidth of the 5G band, the acquired channel list remains unchanged in the Standalone mode of the Omada APP.

6. Fixed the bug that the client list and block list cannot display icons of Huawei, Samsung or some other Android phones in the Standalone mode of the Omada APP.



This version of firmware is applied to the Omada APP of version 3.2.3x or above.

Usar Firmware de Terceros en los Productos de TP-Link


Algunos firmware oficiales de los productos de TP-Link pueden ser sustituidos por el firmware de terceros como DD-WRT. TP-Link no está obligado a proporcionar el mantenimiento o soporte alguno para los mismos, y no garantiza el desempeño y la estabilidad del firmware de terceros. Los daños al producto como resultado del uso de firmware de terceros, anulará la garantía del producto.


Abrir el Código Fuente Para Programadores (GPL)


La siguiente información es para los programadores y no es necesaria para la mayoría de los usuarios particulares de TP-Link.


Los productos de TP-Link contienen en parte del código del software desarrollado por terceros, incluyendo el código del software sujeto a “GLP” (General Public Licence - Licencia Pública General) de GNU, Versión 1/Versión 2/Versión 3 o "LGPL" (Lesser General Public License – Licencia Pública General Reducida) de GNU. Puede usar la condición del software respectiva siguiendo los términos de la licencia de GPL.


Puede revisar, imprimir y descargar los términos respectivos de la licencia de GPL aquí. Usted recibe los códigos fuente de GPL del respectivo software utilizado en los productos de TP-Link para la descarga directa e información adicional, incluyendo una lista del software de TP-Link que contiene el código del software de GPL por el Centro de Códigos de GPL.


Los programas respectivos son distribuidos SIN NINGUNA GARANTÍA, incluso sin la garantía implícita de COMERCIABILIDAD o IDONEIDAD PARA UN PROPÓSITO PARTICULAR. Vea la Licencia Pública General respectiva de GNU para obtener más detalles.


From United States?

Get products, events and services for your region.