-
Hogar
Agregale más puertos a tu Internet
Placa de red y Receptor de señal Wi-Fi: USB o PCle
Bluetooth, USB, Powerbank, Type-C, etc.
-
Cámaras Tapo
Cámaras Inteligentes para Interior y Exterior
-
Negocios
Las redes cableadas de alta velocidad de L3 lograron no administradas
Professional business Wi-Fi with centralized management
The smarter cloud solution for business networking
Ideal para redes inalámbricas de largo alcance y banda ancha
VPN segura y puertas de enlace de equilibrio de carga para el negocio
-
Proveedor de Servicios
Capable of high-speed network and integrated broadband applications
Maintains internet access wherever you go.
The leading technology for delivering gigabit Internet services
Transforms electrical wiring to carry the network signal.
Easily expand your Wi-Fi coverage.
Boosts your business network with premium performance.
Takes your enterprise Wi-Fi to new levels.
- CURSOS
How to configure Port Isolation on Smart and L2 Managed Switches using the new GUI?
This article applies to:
T1500G-10PS v2 or above, T1500G-8T v2 or above, T1500G-10MPS v2 or above, T1500-28PCT v3 or above, T1600G-52TS v3 or above, T1600G-52PS v3 or above, T1600G-28PS v3 or above, T1600G-28TS v3 or above, T1600G-18TS v2 or above, T1700X-16TS, T2600G-52TS v3 or above, T2600G-28TS v3 or above, T2600G-28MPS v3 or above, T2600G-28SQ v1 or above.
Port Isolation is used to limit data transmission between ports. In Port Isolation, you can define a Forwarding Port List for each port. And the port can send data only to the ports in the list. Packets sent to the other ports will be dropped.
Here is an application example for Port Isolation. Host A, B, C are connected to port 1, 2 and 3 respectively. Server A and server B are connected to port 4 and port 5 respectively. It is required that Host A, B and C cannot communicate with each other; Host A can visit both server A and server B, while host B and host C can only visit server A.
Configuration Scheme:
To meet the requirement, you can define different Forwarding Port List for each port. Note that since communications are bidirectional, if you want two ports communicate normally, they need to be in each other’s forwarding lists.
Port |
Forwarding Port List |
Port 1 |
Port 4, 5 |
Port 2 |
Port 4 |
Port 3 |
Port 4 |
Port 4 |
Port 1, 2, 3 |
Port 5 |
Port 1 |
Step 1:
Go to L2 Features > Switching > Port > Port Isolation page, click to load the following configuration page. Choose port 1 in the Port section, and choose port 4 and port 5 in the Forwarding Port List section. Then click Apply.
Step 2:
Click to load the following configuration page. Choose port 2 in the Port section, and choose port 4 in the Forwarding Port List section. Then click Apply.
Step 3:
Click to load the following configuration page. Choose port 3 in the Port section, and choose port 4 in the Forwarding Port List section. Then click Apply.
Step 4:
Click to load the following configuration page. Choose port 4 in the Port section, and choose port 1, 2 and 3 in the Forwarding Port List section. Then click Apply.
Step 4:
Click to load the following configuration page. Choose port 5 in the Port section, and choose port 1 in the Forwarding Port List section. Then click Apply.
Your feedback helps improve this site.
SuscripciónTP-Link toma en serio su privacidad. Para obtener más detalles sobre las prácticas de privacidad de TP-Link, consulte la Política de privacidad de TP-Link.