How do I secure wireless network by using TP-LINK wireless DSL router with WPA-PSK/WPA2-PSK

Step 1 Open the web browser and type the IP address of the device in the address bar (default is 192.168.1.1). Press Enter.

Step 2 Type the username and password in the login page, the default username and password both are admin, Then click OK to log into the device.

Step 3 Click on Wireless->Security on the left side to open the security setting page

Step 4 Configure the wireless security settings for your network shown as below:

Select WPA-PSK or WPA2-PSK for Network Authentication

Enter your Key/Password into WPA Pre-Shared Key box

Select TKIP or AES for the WPA Encryption

Step 5 Click on Save/Apply to save your settings.

Note: The numbers of the key should be between 8~63.

Related Articles:

How do I configure the Basic Wireless settings of TP-LINK wireless DSL router

How do I secure wireless network by using TP-LINK wireless DSL router with WEP encryption

[FAQ ID: 103]How do I secure wireless network by using TP-LINK wireless DSL router with WPA-PSK/WPA2-PSK