CPE510
5GHz 300Mbps 13dBi Outdoor CPE
- Built-in 13dBi 2x2 dual-polarized directional MIMO antenna
- Adjustable transmission power from 0 to 23dBm/200mw
- System-level optimizations for more than 15km long range wireless transmission
- TP-LINK Pharos MAXtream TDMA (Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency performance, ideal for PTMP applications
- Centralized Management System – Pharos Control
- AP / Client / Bridge / Repeater / AP Router / AP Client Router (WISP) operation modes
- Passive PoE Adapter supports up to 60 meter (200 feet) Power over Ethernet deployment and allows the device to be reset remotely
Point-to-Multi-Point Connections
TP-LINK’s 5GHz 300Mbps 13dBi Outdoor CPE, the CPE510 is dedicated to cost effective solutions for outdoor wireless networking applications. With its centralized management application, it is flexible and ideal for point-to-point, point-to-multipoint and outdoor Wi-Fi coverage applications. Professional performance, coupled with user-friendly design, makes CPE510 an ideal choice for both business and home users.
Enterprise Hardware
With Qualcomm Atheros enterprise level chipsets, high gain antennas and high quality material, specially designed enclosure, and PoE power supply, CPE510 is specially designed for outdoor use and can operate flawlessly in almost any climate, with operating temperatures ranging from -30℃ (-22℉) to +70 ℃ (158℉).
Qualcomm Atheros enterprise 560MHz CPU
High power Tx and high sensitivity Rx radio front-end design
Advanced Antenna System
Built-in High Gain Dual-Polarized Antenna
Dedicated metal reflector ensures higher gain
and lower noise interference
V-Pol Co-polarization Pattern
H-Pol Co-polarization Pattern
15km+ Wireless Data Transmission
Specially designed for outdoor uses, ideal for long distance wireless data transmission, covering a range of 15km+ , tested in the field.
15km+
TP-LINK MAXtream TDMA Technology
As network scale increases, wireless competition and collisions among CPEs and base stations will be
so enormous that the real throughput of the network will drop, resulting in a serious impact on end-user
experience. To mitigate these effects, the CPE510 uses MAXtream TDMA Technology.
Pharos Control – Centralized Management System
CPE510 also comes equipped with centralized management software that helps users easily
manage all the devices in their network from a single PC - Pharos Control. Functions like device discovery,
status monitoring, firmware upgrading, and network maintenance can be managed using Pharos Control.
PharOS
User-friendly web-based management system allows professionals to do more specific configurations.
5GHz 300Mbps 13dBi Outdoor CPE CPE510
Built-in 13dBi Dual-polarized
Directional Antenna
AP / Client / Repeater / AP Router /
AP Client Router (WISP) operation modes
6KV Lightning Protection
Weather Proof Enclosure
15KV ESD Protection
Passive PoE Adapter
| CPE520 | CPE510 | CPE220 | CPE210 | TL-WA7210N | |
|---|---|---|---|---|---|
| Wireless Performance | |||||
| Wireless Speed | 5GHz 300Mbps | 5GHz 300Mbps | 2.4GHz 300Mbps | 2.4GHz 300Mbps | 2.4GHz 150Mbps |
| Transmit Power | 27dBm | 23dBm | 30dBm | 27dBm | 27dBm |
| Antenna | 16dBi | 13dBi | 12dBi | 9dBi | 12dBi |
| MIMO | √ | √ | √ | √ | - |
| Coverage Range | 20km+ | 15km+ | 13km+ | 5km+ | 5km+ |
| Hardware | |||||
| Compatibility | 802.11a/n | 802.11a/n | 802.11b/g/n | 802.11b/g/n | 802.11b/g/n |
| External Antenna Interface | - | - | - | - | 1 * RP-SMA |
| Weatherproof Enclosure | √(IPX5) | √(IPX5) | √(IPX5) | √(IPX5) | √ |
| Dual Ethernet Ports | √ | √ | √ | √ | - |
| PoE Passthrough | √ | √ | √ | √ | - |
| Grounding Terminal | √ | √ | √ | √ | √ |
| Lightning Protection over Ethernet Cable |
√ | √ | √ | √ | - |
| ESD Protection | 15kV | 15kV | 15kV | 15kV | 15kV |
| Lightning Protection | 6kV | 6kV | 6kV | 6kV | 4kV |
| Power Supply | 24V Passive PoE Adapter |
24V Passive PoE Adapter |
24V Passive PoE Adapter |
24V Passive PoE Adapter |
12V Power Adapter + Passive PoE Injector |
| Software | |||||
| Operation Modes | AP / Client / Bridge / Repeater / AP Client Router (WISP Client) / AP Router Mode | ||||
| Channel Bandwidth | 5/10/20/40MHz | 5/10/20/40MHz | 5/10/20/40MHz | 5/10/20/40MHz | 20/40MHz |
| Transmit Power Control | Stepping 1dBm | Stepping 1dBm | Stepping 1dBm | Stepping 1dBm | Stepping 3dBm |
| MAXtream TDMA Mode | √ | √ | √ | √ | - |
| Throughtput Monitors | √ | √ | √ | √ | - |
| Spectrum Analyzer | √ | √ | √ | √ | - |
| Iperf Speed Test Tool | √ | √ | √ | √ | - |
| Pharos Control Supported (Central Network Management Application) |
√ | √ | √ | √ | - |
| 處理器 | Qualcomm Atheros Enterprise 560MHz CPU, MIPS 74Kc |
|---|---|
| 記憶體 | 64MB DDR2 記憶體, 8MB 快閃記憶體 |
| 連接介面 | 1 10/100Mbps 屏蔽乙太網路連接埠 (LAN0,被動PoE in) 1 接地端子 1 重置按鈕 |
| 電源供應 | 透過 LAN0 進行乙太網路被動供電（+4,5 針；-7,8 針） 電壓範圍：16-27VDC |
| 功耗 | 最大9.8 瓦 注意：當使用被動 PoE 佈署時，從電源汲取的功率將 根據連接電纜的長度，可能會高一些。 |
| 尺寸(長 x 寬 x 高) | 224 x 79 x 60 毫米(mm) |
| 天線 | 內建 13dBi 2x2 雙極化指向型天線 波束寬度: 45° (H平面方向) / 45° (E平面方向) 注意：更多詳細訊息，請參閱規格說明書 |
| 保護 | 15KV ESD 保護 6KV 雷擊保護 |
| 外殼 | 戶外 ASA 穩定塑膠材料 IPX5防水認證 |
| 無線網路標準 | IEEE 802.11a/n（停用 Pharos MAXtream） |
|---|---|
| 專有協定 | TDMA Mode （啟用 Pharos MAXtream） |
| 無線網路速度 | 高達 300Mbps（40MHz，動態） 高達 144.4Mbps（20MHz，動態） 高達 72.2Mbps（10MHz，動態） 高達 36.1Mbps（5MHz，動態） |
| 無線網路頻率 | 5.15~5.85GHz 注意：可用的工作頻率可能會因使用該設備的國家或地區限制而異。 |
| 傳輸功率 | 26dBm/398mw（功率可調1dBm） 注意：不同通道的最大發射功率可能會有所不同，具體取決於 使用該設備的國家或地區的限制 |
| 無線網路設定 | Pharos MAXtream TDMA 技術 802.11b/g/n 模式 可選通道寬度：5/10/20/40MHz 自動頻道選擇 發射功率控制 動態頻率選擇 (DFS) WDS 啟用/停用 安全性：WPA/WPA2、WPA-PSK/WPA2-PSK (AES/TKIP) 加密、64/128/152 位元 WEP 加密 SSID 廣播啟用/停用 具有 VLAN 標記的多 SSID（僅限 AP 模式） 距離/ACK逾時設定 無線網卡地址過濾器 無線進階： > 信標間隔/RTS 閾值/碎片 >閾值/DTIM間隔/AP隔離/短GI/Wi-Fi多媒體 |
|---|---|
| 管理 | 透過 Pharos Control 進行發現和遠端管理 HTTP/HTTPS 網頁管理 系統日誌 SNMP 代理(v2c) 連線看門狗 動態 DDNS SSH 伺服器 |
| 系統工具 | 無線訊號品質指標： 訊號強度/雜訊/傳輸CCQ/CPU/記憶體 監視器：吞吐量/站點/介面/ARP/路由/WAN/DHCP 頻譜分析儀 速度測試 Ping 路由追蹤 |
| 系統等級最佳化 | 針對多播的應用程式最佳化 IGMP 偵聽/代理 硬體看門狗 |
| 尺寸（長 x 寬 x 高） | 85.8×43.9×29.7 毫米(mm) |
|---|---|
| 介面 | 1 AC 接地端子 1 10/100/1000Mbps 屏蔽乙太網路連接埠 (電源 + 數據) 1 10/100/1000Mbps 屏蔽乙太網路連接埠 (數據) |
| 按鈕 | 遠端重置按鈕 |
| 電源狀態LED燈 | 綠色 |
| 輸入電壓 | 100-240VAC, 50/60Hz |
| 輸出 | 24VDC, 最高 0.5A +4, 5針; -7, 8針. (支援長達 60公尺 乙太網路供電) |
| 效率 | >80% |
| 認證 | CE/FCC/UL/IC/GS/PSB/SAA/S-Mark/KC-mark |
| 認證 | CE, FCC, RoHS, IPX5 |
|---|---|
| 包裝內容 | 室外無線 CPE 24V 0.5A 被動PoE供電器 桿式安裝套件 AC電源線 安裝手冊 |
| 系統需求 | Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX 或 Linux. 注意：我們建議您使用下列 Web 瀏覽器之一以提高使用者體驗 體驗：Google Chrome、Safari 和 Firefox。不建議使用IE瀏覽器。 |
| 環境 | 工作溫度： -40℃~70℃ (-40℉~158℉) 保存溫度：-40℃~70℃ (-40℉~158℉) 工作濕度：10%~90% 無凝結 保存濕度：5%~95% 無凝結 |