Search
Search

How do I upgrade the firmware of my EAP device via web browser?

Configuration Guide
Updated 06-28-2018 01:11:45 AM 22139
This Article Applies to: 

Notice:

  • It is recommended to back up the current settings so that you can restore the settings after the upgrade.
  • It is recommended to upgrade the firmware with Chrome and Firefox.
  • Do NOT turn off the power or cut down the Ethernet cable during upgrade process.

 

Follow the steps below to upgrade the firmware of your EAP device:

Step 1 Go to the website https://www.tp-link.com and search your EAP model. Download the proper firmware file on the support page of the EAP. Use decompression software, such as WinZIP or WinRAR to extract the firmware file to a folder. The firmware file is a .bin file.

Step 2 Power on the EAP and connect to the SSID of the EAP wirelessly.

Note:

If your EAP is a brand new EAP, use the default SSID (format: TP-Link_2.4GHz/5GHz_XXXXXX) printed on the product label.

Step 3 Launch a web browser and enter http://tplinkeap.net in the address bar.

Step 4 Enter the username and password of your EAP to log in.

Note:

If your EAP is a brand new EAP, use the default username and password that are both admin.

Step 5 Go to the System > Firmware Upgrade page. Click the  button, locate and choose the correct firmware file from your host. Then click the  button to update the firmware of the EAP. After upgraded, the EAP will be rebooted automatically.

SubscriptionTP-Link toma en serio su privacidad. Para obtener más detalles sobre las prácticas de privacidad de TP-Link, consulte la Política de privacidad de TP-Link.

Síguenos

Acerca de Nosotros
Prensa
Dónde Comprar
Learning Center
Venezuela / Español
Copyright © TP-Link Corporation Limited. 2021. Todos los derechos reservados

From United States?

Check products and services for your region.

Go Other Option