-
Ev/Ofis
Routerlar
Hızlı ve güvenilir bir Wi-Fi oluşturun
Modem & Gateway
İnternete giriş kapınız
Ağ Genişleticiler
Ağınızı genişletmenin ve geliştirmenin kolay yolları
SOHO Switchler
Kaliteli bağlantılar için kablolu ağ kullanımı
Ağ Adaptörleri
Daha hızlı bir bağlantı için aygıtlarınız Wi-Fi ile donatın
Aksesuarlar
Sağlıklı bir yaşam tarzı için ihtiyacınız olan her şey
-
Akıllı Ev
Cloud Kameralar
Önemli olan şeylere dikkat edin
Akıllı Prizler
Ev cihazlarınızı akıllı hale getirin
Akıllı Ampuller
Her durum için ışık
Aksesuarlar
Akıllı evi genişletin
-
Kurumsal
Omada Cloud SDN
İş ağları için daha akıllı bulut çözümü
JetStream Switches
L3'ten Yüksek Hızlı Kablolu Yönetimsiz Ağlar
SafeStream Router
İşletmenize güvenli VPN ve Yük Dengesi ağ geçitleri
VIGI Surveillance
VIGI video surveillance is dedicated to your security
-
Servis Sağlayıcı
How do I find the firmware version of my EAP device?
Follow the steps below to find the firmware version of your EAP device:
Step 1 Power on the EAP and connect to the SSID of the EAP wirelessly.
Tips:
If your EAP is a brand new EAP, use the default SSID (format: TP-Link_2.4GHz/5GHz_XXXXXX) printed on the product label.
Step 2 Launch a web browser and enter http://tplinkeap.net in the address bar.
Step 3 Enter the username and password of your EAP to log in.
Note:
If your EAP is a brand new EAP, use the default username and password that are both admin.
Step 4 Go to the Monitoring > AP > Device Information page. You can view the Firmware Version as the following figure shows. The Build number indicates the released date, the first four digits representing the year, the next two month and last two day. For example, 20180411 means the released date is April 11th, 2018.
Your feedback helps improve this site.