-
Для дома
Коммутаторы SOHO
Качественные проводные подключения для дома
Wi-Fi адаптеры
Создайте Wi-Fi на устройствах, у которых нет встроенного Wi‑Fi
Аксессуары
Всё остальное, что может пригодиться, чтобы оставаться на связи
-
Умный дом
Облачные камеры
Будьте в курсе всего происходящего
Умные розетки
Сделайте свой дом чуточку умнее
Умные лампы
Освещение на любой вкус и цвет
-
Для бизнеса
Коммутаторы JetStream
Высокоскоростное проводное подключение
Облако Omada SDN
Умное облачное решение для бизнеса
Wi-Fi оборудование Pharos
Решение для Wi-Fi сетей с большим радиусом действия
Маршрутизаторы SafeStream
Шлюзы для бизнеса с VPN и балансировкой нагрузки
-
Для операторов связи
Коммутаторы
Максимум производительности для сетей предприятий
Wi-Fi роутеры
Надёжный выбор для домашней сети
How to configure VLAN VPN on L2 Managed switches using the old GUI?
VLAN-VPN (Virtual Private Network) function, the implement of a simple and flexible Layer 2 VPN technology, allows the packets with VLAN tags of private networks to be encapsulated with VLAN tags of public networks at the network access terminal of the Internet Service Provider. And these packets will be transmitted with double-tag across the public networks.
Now let´s learn how to configure the VLAN VPN on L2/L3 Managed Switches by the following example:
Network Topology:
As we can see,VLAN 2 is the private network while VLAN 20 is the public network, we are going to achieve the purpose that two Terminals can communicate with each other. The Provider Edge(T-3700G) encapsulate the private network’s datagram with outer layer tag and packets transmitted with double tags in Public Network.
Here we take T-3700G and TL-SL3428 as an example.
The connection of Side A is like the following and the Side B is the same as Side A,here we take Side A as an example to config:
Configuration on TL-SL3428:
- Create VLAN 2 contains port 3 tagged and port 8 untagged.
2. Set the Link type of port 3 as General and port 8 as Access. The pvid is 2.
Configuration on T-3700G:
- Create VLAN 2 contains port 3 tagged and VLAN 20 contains port 3 untagged and port 8 tagged.
2. Set the Link type of port 3 and port 8 as General. The pvid is 20.
3. Enable the VLAN VPN mode and select port 8 as Up-link port.
4.Select the port 3 and enable it.
Configuration of side B is the same as this side A.
Now, the network will work as described Purpose.
Ваш отзыв поможет нам улучшить работу веб-сайта.