What to do if my floodlight camera cannot power on
Tapo Others
Дата последнего обновления: 01-11-2024 07:22:29 AM
5404
5404 Эта статья подходит для:
Please consult or have it performed by a licensed electrician.
- Make sure you have turned on the circuit breaker.
- Check that the bracket and camera are firmly attached.
- Turn off the circuit breaker and check the wiring. Make sure the Line and Neutral wires are connected correctly. Refer to https://www.tp-link.com/support/faq/3474/ for detailed instructions.
- Turn off the circuit breaker and check that the wires are well-connected to the bracket and the screws are tightened.
- Reset the circuit breaker and verify wires are working properly. Make sure the power supply voltage is 110 V~240 V. It’s recommended to consult or have it performed by a licensed electrician.
Был ли этот FAQ полезен?
Ваш отзыв поможет нам улучшить работу сайта.
Сообщество TP-Link
Нужна помощь? Задавайте вопросы, находите ответы и обращайтесь за помощью к специалистам TP-Link и другим пользователям со всего мира.