Search
Search

How to configure Port Mirror on TP-Link routers?

User Application Requirement
Updated 03-30-2020 05:42:38 AM 42893
Ten artykuł dotyczy: 

Port Mirror could duplicate the datagram transmitted through Mirrored Port to Mirroring Port. This function allow network administrator to capture datagram of a specific port to monitor the network or troubleshoot.

Note: the router with different hardware version may get a different UI, but the configuration process is the SAME basically, like: TL-ER6120 V3

 

Now let´s learn how to configure the Port Mirror on TP-Link routers:

Here we use TL-ER6120 v1 as configuration example.

1.    Select “Switch” in the Network menu and choose “Port Mirror”:  

2.    Check the box to enable Port Mirror function, then you can choose “Ingress”, “Egress” or “Ingress&Egress” mode to monitor the different directions of data transmission of Mirrored Port.

3.    Then you could select the Mirroring Port and Mirrored Port. One Mirroring Port could monitor more than one Mirrored Port.

4.    Click “Save” to save the changes.

When you finish these steps above, you could achieve the data transmitted through mirrored port on mirroring port.

Note：The TL-R470T+ V6.0 and TL-R480T+ V9.0 cannot support the Port Mirror feature.

 

 

 

NewsletterTP-Link poważnie traktuje twoją prywatność. Więcej szczegółów znajdziesz na stronie Informacja o przetwarzaniu danych osobowych.

Znajdź nas

O nas
Informacje prasowe
Polska / Polski
Copyright © 2021 TP-Link Corporation Limited. Wszelkie prawa zastrzeżone.

From United States?

Check products and services for your region.

Go Other Option