8포트 기가비트 데스크톱/랙마운트 스위치 (PoE+ 8포트)

10 / 100 / 1000Mbps RJ45 포트 8 개
단일 케이블을 통해 데이터와 전력을 전송하기 위한 8개의 PoE+ 지원 포트 장착
IEEE 802.3af/at 호환 장치와 함께 작동하여 가정 및 사무실 네트워크 확장
혁신적인 에너지 효율적인 기술로 전력 소비량 절감
153W*의 총 전력 공급량 및 포트당 최대 30W의 PoE+ 표준 지원
플러그 앤 플레이 설계, 구성 불필요

TP-LINK PoE 기술에 대해 더 알아보기 >

제품 개요

What This Product Does

The TL-SG1008MP is an 8-Port Gigabit Desktop/Rack mountable Switch with all 8 ports supporting the PoE+ standard. It provides a simple way to expand a wired network by transferring power and data over a single Ethernet Cable. With a total power budget of 153W, up to 30W per port, TL-SG1008MP can power more high-powered devices such as wireless Access Points (APs), IP Cameras or IP Phones. Moreover, with innovative energy-efficient technology, the TL-SG1008MP can save the power consumption, making it an eco-friendly solution for your business network.

How This Product Works

All 8 ports of TL-SG1008MP support Power over Ethernet Plus (PoE+) standard which can automatically detect and supply power to any IEEE 802.3af/at compliant device(s). In this situation, the electrical power is transmitted along with data in a single cable, allowing you to expand your network where there are no electrical cables or outlets, where you wish to fix devices such as APs, IP Cameras or IP Phones.

Overload Arrangement

TL-SG1008MP has a priority function which helps protect the system when its power is overloaded. If all PoE+ devices’ power consumption is greater than or equal to 153W, a priority will be arranged among the 8 PoE+ ports, at which point the system will cut off the power of the lowest-priority port.

Port Priority Function

Priority (port 1 > port 2 > port 3 > port 4 > port 5 > port 6 > port 7 > port 8): This function helps protect the system if the power becomes overloaded. For example, if port 1, 2, 4, 5 and 7 are using 30W (maximum power per port is 30W, the system power is 153W in total), and there is an additional device inserted into Port 3 at 25W, the system will cut off the power of Port 7 in response to the power exceeding the 153W limit., This means Port 1, 2, 4 and 5 will use 30W, and Port 3 will use 25W, with no power will be supplied to Port 7 as it has the lowest designated priority among the ports in use.

Easy To Use

TL-SG1008MP is easy to install and use. It requires no configuration or installation. With its Desktop/Rack mountable design, outstanding performance and quality, the TP-Link TL-SG1008MP 8-Port Gigabit Desktop/Rack mountable Switch with 8-Port PoE+ is a great choice for expanding your home or office network.

하드웨어 사양
인터페이스	8 10/100/1000Mbps RJ45 Ports AUTO Negotiation/AUTO MDI/MDIX
네트워크 미디어	10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 100BASE-TX: UTP category 5, 5e cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m) 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) EIA/TIA-568 100Ω STP (maximum 100m)
팬(Fan) 수량	1
물리적인 보안 락	No
전원 공급	100-240VAC, 50/60Hz
패킷 전달 속도	11.904 Mpps
PoE+ 포트(RJ45)	Standard: 802.3af/at compliant PoE+ Ports: 8 Ports Power Supply: 153W
Mac 주소 테이블	4K
버퍼 사이즈	1.5Mbits
점보 프레임	16 KB
스위칭 용량	16Gbps
크기 ( 가로 x 세로 x 높이 )	11.67.11.7 in. (29418044 mm)
마운트	Desktop/Rack Mountable
최대 전력 소모량	8.57W(220V/50Hz. no PD connected) 173.65W(110V/60Hz. with 153W PD connected)
최대 방열수치	29.22BTU/h(no PD connected) 592.15BTU/h(with 153W PD connected)

소프트웨어 기능
고급 기능	Compatible With IEEE 802.3af/at Compliant PDs Priority Function Mac Address Auto-Learning And Auto-Aging IEEE802.3x Flow Control For Full-Duplex Mode And Backpressure For Half-Duplex Mode
전송 방식	Store-And-Forward

기타
인증	FCC, CE, RoHS
구성품	TL-SG1008MP, Power Cord, Installation Guide, Rackmount Kit, Rubber Feet
사용 환경	Operating Temperature: 0℃~50℃ (32℉~122℉) Storage Temperature: -40℃~70℃ (-40℉~158℉) Operating Humidity: 10%~90% non-condensing Storage Humidity: 5%~90% non-condensing