AP7650

New

Omada Pro AX3000 Wall Plate WiFi 6 Access Point

  • Ultra-Fast AX3000 WiFi 6 Speeds:: Simultaneous 574 Mbps on 2.4 GHz and 2402 Mbps on 5 GHz totals 2976 Mbps WiFi speeds.
  • Complete In-Room WiFi Coverage: Guaranteed strong signals and corner-to-corner WiFi coverage.
  • Multiple Gigabit Ports: Connect multiple devices with three downlink gigabit ports, one with PoE pass-through.
  • Centralized Cloud Management: Integrates into Omada SDN for cloud access and remote management.
  • Secure Guest Network: Implement multiple authentication options (SMS/Voucher) packed with high-quality wireless security technologies.§
  • Easy Installation and PoE Support: Easy-to-install design, compatible with 86 mm & EU & US standard junction box, and 802.3af/at PoE support.

What This Product Does

AP7650, the Omada Pro AX3000 Wall Plate WiFi 6 access point, delivers speeds of up to 2976 Mbps which are boosted by the latest WiFi 6 technology such as 1024-QAM, BSS Coloring, and more. Multiple built-in Gigabit Ethernet ports allow a smooth network for each room, such as dormitories, apartments, villas, and more. PoE supported also provides easy and flexible installations.

Network with Enterprise-Grade WiFi 6

The overall 2976 Mbps WiFi performance is increased by 1024-QAM and longer OFDM symbol, supporting both 2402 Mbps on 5 GHz and 574 Mbps on 2.4 GHz.†‡

The WiFi 6 features and advanced wireless techniques guarantee higher network efficiency and lower latency, such as BSS Coloring, Band Steering, and more.

Auto Channel Selection and Power Adjustment

Provides powerful wireless performance while significantly reducing WiFi interference by automatically adjusting the channel settings and transmission power levels of neighboring APs in the same network.**

Full Gigabit Ports to Bridge Network

Wired devices like VoIP phones can be powered with no need for extra electrical cables. The four data ports (1 uplink + 3 downlinks) transfer data at multiple gigabits, allowing you to connect several devices to your gigabit network. One of the downlink ports offers PoE pass-through to eliminate the need for that extra power port.*

More than Speed, Security Matters

Customizable WIDS§ and adaptive WIPS§ empower the protection of critical data and network resources.

Intelligent Anomaly Detection and Analysis§ maintains 24/7 detection of network anomalies with timely alarms. Protect your network anywhere, anytime.

AP7650 also provides secure WiFi access along with multiple authentication options (SMS, Voucher, etc) and abundant wireless security technologies, such as WPA3.

Cloud Centralized Management

The Omada Software Defined Networking (SDN) platform provides 100% centralized cloud management and creates a highly scalable network controlled from a single interface. Seamless wireless connections are provided, making them ideal for use in dormitory, apartment, villa, and more. 

Quick, Simplified Installation

AP7650 supports 802.3af/802.3at PoE, so there’s no need for more wiring.

With an easy-to-install design, there is no need to bring someone to install our AP7650. Plug it into the existing Ethernet cables, and it’s ready.

Follow the configuration instructions on the free Omada app to get set up in minutes. Omada lets you configure settings, monitor the network status, and manage clients, all from the convenience of a smartphone or tablet.

HARDWARE FEATURES
Interface • Uplink: 1× 10/100/1000 Mbps Ethernet Port
• Downlink: 3× 10/100/1000 Mbps Ethernet Ports (One port supports PoE out, and the PoE out feature requires 802.3at PoE+ input.)
Physical Security Lock No
Button Reset, LED
Power Supply 802.3af/at PoE
Power Consumption • EU: 12W (802.3at PoE, PoE Out off)
• US: 12.6W (802.3at PoE, PoE Out off)
Dimensions 143 × 86 × 42.6 mm (5.6 × 3.4 × 1.7 in)
Antenna 2 Dual-Band Antennas
• 2.4 GHz: 2× 3 dBi
• 5 GHz: 2× 5 dBi
Mounting Wall Plate Mounting (Kits included)
WIRELESS FEATURES
Maximum Number of Wireless Clients 100+
Wireless Standards IEEE 802.11ax/ac/n/g/b/a
Frequency 2.4 GHz and 5 GHz
Signal Rate • 5 GHz: Up to 2402 Mbps
• 2.4 GHz: Up to 574 Mbps
Wireless Functions • 16 SSIDs (Up to 8 SSIDs on each band)
• Enable/Disable Wireless Radio
• Automatic Channel Assignment
• Transmit Power Control (Adjust Transmit Power on dBm)
• QoS(WMM)
• Seamless Roaming§
• Beamforming
• Rate Limit
• Load Balance
• Airtime Fairness
• OFDMA
• Band Steering
• Reboot Schedule
• Wireless Schedule
• RADIUS Accounting
• MAC Authentication
• Wireless Statistics
• Static IP/Dynamic IP
Wireless Security • Captive Portal Authentication§
• Access Control
• Wireless MAC Address Filtering
• Wireless Isolation Between Clients
• SSID VLAN
• WIDS/WIPS§
• Rogue AP Detection
• 802.1X Support
• WPA-Personal/Enterprise, WPA2-Personal/Enterprise, WPA3-Personal/Enterprise
Transmission Power • CE:
<20 dBm (2.4GHz, EIRP)
<23 dBm (5GHz band1 & 2, EIRP)
<24 dBm (5GHz band3, EIRP)

• FCC:
< 21 dBm (2.4 GHz)
< 21 dBm (5 GHz)
MANAGEMENT
Omada App Yes
Centralized Management • Omada Pro Software Controller
• Omada Pro Cloud-Based Controller
Cloud Access Yes. Require the use of Omada Pro Cloud-Based Controller, or Omada Pro Software Controller.
Email Alerts Yes
LED ON/OFF Control Yes
Management MAC Access Control Yes
SNMP v1, v2c, v3
System Logging Local/Remote Syslog Local/Remote Syslog
SSH Yes
Web-based Management HTTP/HTTPS
L3 Management Yes
Multi-site Management Yes
Management VLAN Yes
Zero-Touch Provisioning Yes. Require the use of Omada Pro Cloud-Based Controller.
OTHERS
Certification FCC, RoHS
Package Contents • AP7650
• Installation Guide
• Mounting Kits
System Requirements Microsoft Windows XP, Vista, Windows 7, Windows 8, Windows10, Windows 11, Linux
Environment • Operating Temperature: 0–40 ℃ (32–104 ℉)
• Storage Temperature: -40–70 ℃ (-40–158 ℉)
• Operating Humidity: 10–90% RH non-condensing
• Storage Humidity: 5–90% RH non-condensing

Maximum wireless signal rates are the physical rates derived from IEEE Standard 802.11 specifications. Actual wireless data throughput and wireless coverage are not guaranteed. They will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead; and 3) client limitations, including rated performance, location, connection, quality, and client condition.

The actual capacity depends on the wireless environment and client traffic and is generally less than the maximum number of client connections.

Use of WiFi 6 (802.11ax) and its features, including OFDMA, HE160, Beamforming, Band Steering, 1024-QAM, and others require clients to support the corresponding features. The 160 MHz bandwidth is only available on the 5 GHz band. It may be unavailable in some regions/countries due to regulatory restrictions. The double channel width refers to 160 MHz compared to 80 MHz for general WiFi 6 APs.

§These functions require the use of an Omada Pro controller.

*PoE pass-through is only available when 802.3at powers the device.

**These functions require the use of Omada Cloud-Based Controller.

From United States?

Get products, events and services for your region.