-
RUMAH
SOHO Switches
Keeping your home wired for quality connections
Accessories
Everything else you need for a connected lifestyle
-
Smart Home
Cloud Camera
Keeping an eye on what matters
Smart Plug
Smarten up your home devices
Smart Bulb
Light for every occasion
-
BISNIS
Omada Cloud SDN
The smarter cloud solution for business networking
Switches
High-Speed wired networking from L3 managed to unmanaged
Pharos Wireless Broadband
Ideal for long range wireless broadband networking
SafeStream Router
Secure VPN and Load Balance gateways to the business
-
PENYEDIA LAYANAN
GPON
The leading technology for delivering gigabit Internet services
How to change the IP address of the smart and managed switches using the old GUI and CLI?
132670 Suitable for: TP-Link Smart Switches, L2/L2+/L3 Managed Switches.
Method 1: Web GUI
For old TP-Link switches, if you want to change the management IP address using Web GUI, for instance, on TL-SL5428E or on TL-SG3424.You need to go to “System Info”-”System IP” and change the IP address and Subnet Mask.
But for TP-Link T serial switches (the switches named with “T”, like T 1600G-28TS,T2600G-52TS or T3700G-28TQ),the old way will not work, because there is no “System IP ” Option any more in the same column.
If you want to change the default management IP address, you will have to go to “Routing”-”Interface ”,click on “Edit” for VLAN 1,and change the IP address and Subnet Mask.
Method 2: Command Line Interface
The CLI commands to change the management IP address and subnet mask are the same on old TP-Link switches and on new TP-Link switches.
We want to set 172.30.30.254/24 as the management IP for TL-SL5428E and T3700G-28TQ.
Here is the Commands on TL-SL5428E:
TL-SL5428E>
TL-SL5428E>en
TL-SL5428E#con
TL-SL5428E(config)#interface vlan 1
TL-SL5428E(config-if)#ip address 172.30.30.254 255.255.255.0
TL-SL5428E(config-if)#
On T3700G-28TQ, the Commands are the same:
T3700G-28TQ>
T3700G-28TQ>en
T3700G-28TQ#con
T3700G-28TQ(config)#interface vlan 1
T3700G-28TQ(config-if)#ip address 172.30.30.254 255.255.255.0
T3700G-28TQ(config-if)#
Note: There is “management vlan” on the old TP-Link switch, like TL-SG3424 and TL-SL5428E.
So if you have changed the management vlan（the default management vlan is “vlan 1”)from vlan 1 to vlan 2 on TL-SL5428E,the commands to change the management IP address should be changed to:
TL-SL5428E>
TL-SL5428E>en
TL-SL5428E#con
TL-SL5428E(config)#interface vlan 2
TL-SL5428E(config-if)#ip address 172.30.30.254 255.255.255.0
TL-SL5428E(config-if)#
Your feedback helps improve this site.