Search
Search

How to login to the web management page of TL-WA7210N/TL-WA7510N?

Configuration Guide
Updated 06-26-2017 08:33:56 AM 32798
This Article Applies to: 

The web-based management page is a built-in internal web server that does not require internet access. It does however require your device to be connected to the TP-Link device. Here takes TL-WA7210N as an example.

Physical Connection

Connect one end of an Ethernet cable to the PoE port of the provided PoE and the other end of the Ethernet cable to the LAN port of the CPE. Then, connect the LAN port of the PoE to a PC using another Ethernet cable. Finally, plug the provided power adapter into the DC jack on the PoE, and the other end to a standard electrical wall socket.

Note: The DHCP is disabled by default, so please set static IP Address on your computer first.

Initial Computer Setup– For Windows 7, Vista & XP

Step 1:

Windows 7&Windows Vista: Go to Start->Control Panel ->Network and Sharing Center

Windows XP: Go to Start->Control Panel->Network Connections

Step 2:

Windows 7: Go to Network and Sharing Center>Change Adapter settings

Windows Vista: Go to Network and Sharing Center>Manage Network Connections

Windows XP: (Go to Next Step)

Step 3:

Windows 7, Vista and XP: Right Click Local Area Connection >Select Properties > Double Click Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol (TCP/IP) forWindows XP.

Step 4:

Windows 7, Vista and XP: Select “Use the Following IP address:”

Type the following information:

1. IP address: 192.168.0.10 (for TL-WA7210N) or 192.168.1.10 (for TL-WA7510N)

2. Subnet mask: 255.255.255.0

3. Default Gateway:192.168.0.254 (for TL-WA7210N) or 192.168.1.254 (for TL-WA7510N)

 

Click OK to exit.

Click OK again to apply the settings.

Initial Computer Setup– For Windows8/8.1

Press “Windows key +F”, a search box will come out, please input control panel and press enter;

please click on “Network and Internet Network and Sharing Center > Change Adapter Settings (on the left)”;

Right click on “Ethernet”,go to“Properties”, and then choose “Internet Protocol Version 4”, click on Properties;

Please select “Use the following IP address”, and type the following information:

1. IP address: 192.168.0.10 (for TL-WA7210N) or 192.168.1.10 (for TL-WA7510N)

2. Subnet mask: 255.255.255.0

3. Default Gateway:192.168.0.254 (for TL-WA7210N) or 192.168.1.254 (for TL-WA7510N)

Click OK to exit.

Click OK again to apply the settings.

 

Initial Computer Setup– For Mac OS X

Go to the Apple > System Preferences > Network> Highlight Ethernet > Configure IPv4: Using DHCP with manual address

Input the IPv4 Address: 192.168.0.10 (for TL-WA7210N) or 192.168.1.10 (for TL-WA7510N)

Click Apply

Access the Management Page

 

Open a Web Browser > Type 192.168.0.254/192.168.1.254 in the address bar > Press Enter

A dialog box will prompt you for the User name and Password. Enter the default values (both are admin). Select "I agree to these terms of use" and click login.

Note: After the configuration is finished on the management page, please change your computer back to “Obtain an IP address automatically” or “using DHCP”.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

 

 

Sign Up for News & OffersTP-Link takes your privacy seriously. For further details on TP-Link's privacy practices, see TP-Link's Privacy Policy.

Follow Us

About Us
Press
Learning Center
Worldwide / English
Copyright © 2020 TP-Link Corporation Limited. All rights reserved.

From United States (English)?

Check products and services for your region.

Go Other Option