Setup Video

  • How to set up a TP Link EAP via your mobile phone

    This video demonstrates how to set up a TP-Link EAP via your mobile phone. The setup consists of four steps:
    • Connect the EAP to the network
    • Download the Omada APP
    • Connect to the EAP's wireless network
    • Set up the EAP using the Omada APP

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models. (except EAP120 and EAP220)
    • A small number (1-3) of EAPs.

    Learn More

  • How to setup the OC200 via a web browser

    This video will demonstrate how to set up the OC200 via a web browser. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.

    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Learn More

  • How to setup the OC200 via your mobile phone

    This video will demonstrate how to set up the OC200 via your mobile phone. You need to use the Omada APP to complete the setup. The setup consists of six steps:
    • Connect the OC200 to your local network.
    • Get ready for setup.
    • Create a TP-Link ID.
    • Log into your TP-Link ID.
    • Add the OC200 to your TP-Link ID.
    • Follow the wizard to set up the OC200.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Cloud Controller OC200
    • Mass EAPs (usually more than three)

    Learn More

  • How to manage TP-Link EAPs centrally from a remote place via a web browser

    You can manage TP-Link EAPs at any time from anywhere with the Cloud Access function of our Omada Controller Software. This video introduces both the application scenario and concrete steps you can follow. Don't hesitate to give it a try.
    THIS VIDEO APPLIES TO:
    • All TP-Link EAP models (except EAP120 and EAP220)
    • Omada Controller Software (version 3.0.2 or above)
    • Mass EAPs (usually more than three)

    Learn More

  • A Quick Overview of EAP Management Methods

    This video will introduce how to choose the optimum method to manage TP-Link EAPs in your scenario.
    Here are three most common Scenarios:
    • Manage one or two EAPs locally
    • Manage three or more EAPs locally
    • Manage EAPs remotely via the cloud
    To choose the optimum management method, consider the following three questions:
    1. Choose Standalone mode or Controller mode for management?
    2. In Controller mode, what kind of controller will you use, an OC200 or a PC with Controller Software?
    3. What kind of user interface will you use, a web browser or the Omada app?

    Learn More

  • How to Set up a TP-Link EAP via Web browser

    This video will demonstrate how to set up a TP-Link EAP via a web browser. The setup consists of three steps:
    1. Connect the EAP to the network
    2. Log into the EAP (via a wired/wireless connection)
    3. Change the default SSID
    This video is suitable for users with a small number (1-3) of EAPs .

    Learn More

FAQs

Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  • Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. (Normally V1.x=V1)
    How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
EAP115-Wall(EU)_V1_1.4.0 Build 20190216
Published Date: 2019-03-21 Language: English File Size: 5.70 MB

Recommended Controller Software Version: Omada Controller v3.1.x or above

 

New Feature/Enhancement:

1. Add Radius Accounting to External Radius Server in standalone mode.

2. Add SSID Radius accounting to WPA-Enterprise security mode.

3. Add SSL encryption in Auto Mail of Log Settings.

4. Support the feature of merging 2.4GHz and 5GHz SSID with Controller 3.1.4.

5. Support SSID MAC Authentication to none security mode with Controller 3.1.4.

6. Support channel utilization function with Controller 3.1.4.

7. Support Layer-3 Accessibility in SSH with Controller 3.1.4.

8. Change the rule of the LED when resetting/rebooting EAP.

 

Notes:

1. For EAP115-wall v1 only.

2. Your device's configuration won't be lost after upgrading.

3. This version of firmware is applied to Omada APP of version 2.1.X or above.

EAP115-Wall(EU)_V1_1.2.0 Build 20180606
Published Date: 2018-07-24 Language: English File Size: 7.06 MB

Recommended Controller Software Version:  Omada Controller v 2.6.x or above

New Features/Improvements:

1. Support Omada APP management method.

2. UI Display Optimization.

Notes:

1. For EAP115-Wall (EU)_v1 only.

2. Your device's configuration won't be lost after upgrading.

EAP115-Wall(EU)_V1_1.2.0 Build 20180419
Published Date: 2018-04-28 Language: English File Size: 7.06 MB

Recommended Controller Software Version:  Omada Controller v 2.6.x or above

 

New Features/Improvements:

1. Management mechanism changing: In standalone mode, only one user is allowed to login the management page of the EAP at the same time.

2. Supports HTTPS redirection of portal authentication page.

3. Facebook Portal now intercepts HTTPS access unless you pass the authentication.

4. Omada Controller will create Free Authentication Policy for the External Web Portal Server   and External Portal Server automatically.

5. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit at the same time, and the minimum limit value will take effect.)

6. Restricts local resources access of wireless clients which did not pass the authentication.

7. Decreased the synchronization update time of Omada Controller when the IP address of EAP is changed.

8. EAP will report Client RSSI information to Omada Controller.

9. Optimized Rouge AP detection process.

10. Changed the selecting range of auto channel of 2.4G radio to non-overlapping channel 1/6/11

 

Bug Fixed:

1. Fixed the incorrect IP address displaying of some clients in Omada Controller.

2. Fixed the bug that clients may still be able to connect with EAP after blocking the clients in clients list.

3. Fixed the bug that SSID rate limit configuration may not take effect if it is configured when wireless radio is turned off.

 

Notes:

1. For EAP115-Wall (EU)_v1 only.

2. If you managed EAP by Omada Controller, you can’t manage this EAP by Web management page, unless you have reset the EAP.

3. Your device's configuration won't be lost after upgrading.

 

 

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

Controller Software

The EAP Controller is used to manage multiple EAPs intensively.

Published Date: 2019-03-25 Language: English File Size: 102.73MB
Operating System: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. To use Omada Controller 3.1.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

8. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

9. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

10. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

11. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

12. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

13. Channel utilization will take effect only with new firmware.

Published Date: 2019-03-25 Language: English File Size: 129.07MB
Operating System: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8

New Feature/Enhancement:

1. Merge 2.4GHz and 5GHz SSID.

2. Add Guest Network function.

3. Optimize log field and content.

4. Add SSID Radius accounting to WPA-Enterprise security mode.

5. Optimize the site list which allows us to inquire the specific site based on the site name and add new entrance for the hotspot.

6. Add SSL encryption in Log Server, and Log setting/Mail Server can be only accessed by administrator account.

7. Add Layer-3 Accessibility in SSH.

8. Add Mesh settings to Backup and Restore file.

9. Add CHAP encryption and NAS ID in Radius portal authentication and the Radius Client role is transferred from EAP to Omada Controller.

10. Add SSID MAC Authentication to none security mode.

11. Add channel utilization function.

12. Add Full-Sector DFS function in Mesh network.

13. Channel limit is revised from private configuration to site settings.

14. Support inputting domain name in SMTP server.

 

Notes:

1. To use Omada Controller 3.1.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above, Debian 9.8.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.1.X from 2.4.8.

7. This version software needs you to install manually via curl command.

8. The log will be cleared when you upgrade the software from version 3.0.x to version 3.1.4.

9. Add push notification to Omada APP of version 2.1.4 or above when EAP is connected/disconnected from Omada Controller.

10. This version of Omada Controller is applied to Omada APP of version 2.1.4 or above.

11. When you upgrade your controller or backup files from lower version, the 2.4GHz and 5GHz SSID entries with the same name will be merged and it will inherit the parameters of the original 2.4GHz SSID.

12. If you use External Radius Server with External Web Portal in old version controller, pay attention that the API has been changed in this version, thus you have to modify your External Web Portal, refer to FAQ-2390 for more details.

13. The log generated by EAP will be managed and storaged by Controller if you manage EAPs by Omada Controller.

14. Channel utilization will take effect only with new firmware.

 

Published Date: 2018-11-08 Language: English File Size: 102.25MB
Operating System: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1.  Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2.  Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3.  Prevent Operator users from viewing Device Account information.

4.  Display AP channels in the AP list.

5.  Interchange Map and Statistic page.

6.  UI Optimization

7.  Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller Linux may fail to self-start with system.

2. Fixed the bug that if the PC modifies the local loopback address (127.0.0.1) or some network interface without MAC address, Controller Linux cannot bind the cloud account and appears General Error.

3. Fixed the bug that Omada Controller may not display normally in IE browser.

4. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

5. Fixed the bug that the suffix name of the export file of Trust APs may be wrong when export it on Safari browser.

6. Fixed the bug that 2.4G radio configuration page of Mesh AP may appear channel limit selection option.

7. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

8. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Published Date: 2018-11-08 Language: English File Size: 122.14MB
Operating System: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not display normally in IE browser.

2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser.

4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP.

5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Published Date: 2018-11-08 Language: English File Size: 126.05MB
Operating System: Windows 7/8/10/Server

New Feature/Enhancement:

1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

7. Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not display normally in IE browser.

2. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

3. Fixed the bug that the suffix name of the export file of trust AP list may be wrong when export it on Safari browser.

4. Fixed the bug that 2.4G radio configuration page may appear channel limit selection of Mesh AP.

5. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

6. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Published Date: 2018-11-08 Language: English File Size: 127.91MB
Operating System: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above

New Feature/Enhancement:

1.  Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2.  Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3.  Prevent Operator users from viewing Device Account information.

4.  Display AP channels in the AP list.

5.  Interchange Map and Statistic page.

6.  UI Optimization

7.  Security flaw optimization: Update the third party libraries to defend the vulnerability attack.

 

Bug Fixed:

1. Fixed the bug that Omada Controller Linux may fail to self-start with system.

2. Fixed the bug that if the PC modifies the local loopback address (127.0.0.1) or some network interface without MAC address, Controller Linux cannot bind the cloud account and appears General Error.

3. Fixed the bug that Omada Controller may not display normally in IE browser.

4. Fixed the bug that the browser will hint to download files when uploading map or other files to Omada Controller in IE browser.

5. Fixed the bug that the suffix name of the export file of Trust APs may be wrong when export it on Safari browser.

6. Fixed the bug that 2.4G radio configuration page of Mesh AP may appear channel limit selection option.

7. Fixed the bug that Auto Backup can't take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

8. Fixed the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as (!@#$%^&*).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Published Date: 2018-09-30 Language: English File Size: 122.11MB
Operating System: Windows 7/8/10/Server

Omada_Controller_V3.0.4_Windows32bit

New Feature/Enhancement:


1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

 

Bug Fixed:

1.  Fixed the bug that Auto Backup can’t take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

2. Fix the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Published Date: 2018-09-30 Language: English File Size: 126.02MB
Operating System: Windows 7/8/10/Server

Omada_Controller_V3.0.4_Windows64bit

New Feature/Enhancement:


1. Optimize the AP firmware online upgrade process, and add an upgrade prompt in the AP list.

2. Adjust the EAP maximum transmit power limit in EAP private configuration page according to the regulations.

3. Prevent Operator users from viewing Device Account information.

4. Display AP channels in the AP list.

5. Interchange Map and Statistic page.

6. UI Optimization

 

Bug Fixed:

1.  Fixed the bug that Auto Backup can’t take effect when you backup/restore configuration file among Windows Controller/Linux Controller/OC200, since the Auto Backup file path does not match with each other.

2. Fix the bug that Device Account of Omada Controller 3.0.2 does not support special character, such as !@#$%^&*.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Published Date: 2018-09-05 Language: English File Size: 102.27MB
Operating System: Ubuntu 14.04/16.04/17.04/18.04

New Feature/Enhancement:

1. Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2. Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3. Support EAP firmware online upgrade function.

4. Support configuration/data files auto backup function.

5. Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information in a specific time.

6. Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (When you are using External RADIUS Server Portal function with External Web Portal)

7. Batch Upgrade function now will only take effect to EAP which belong to the current site.

8. UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function.

9. Start Omada Controller via jsvc to realize Root Privilege separation function. (For deb installation package, it will create a non-root account called omada to run Omada Controller in default.

10. Change the default port of mongod from 27017 to 27217.

 

 

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not be started successfully if modified the http.connector.port in jetty.properties.

2. Synchronously fixed the bugs of Omada Controller Windows (From 2.5.4 to 3.0.2).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Published Date: 2018-09-05 Language: English File Size: 128.47MB
Operating System: Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above

New Feature/Enhancement:

1. Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2. Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3. Support EAP firmware online upgrade function.

4. Support configuration/data files auto backup function.

5. Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information in a specific time.

6. Start Omada Controller via jsvc to realize Root Privilege separation function. (For tar.gz installation package, Omada Controller will be operated in root mode. But you can modify the OMADA_USER in bin/control.sh to assign another non-root account to run Omada Controller instead.)

7. Change the default port of mongod from 27017 to 27217.

 

 

 

Bug Fixed:

1. Fixed the bug that Omada Controller may not be started successfully if modified the http.connector.port in jetty.properties.

2. Synchronously fixed the bugs of Omada Controller Windows (From 2.5.4 to 3.0.2).

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. The Omada Controller program needs to use the system's netstat command. If the Linux system does not have net-tools installed (which contain the netstat command), the program may run abnormally.

3. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04/18.04, CentOS 6.x/7.x and Fedora 20 or above.

4. Built-in JRE 1.8 Java environment.

5. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

6. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.8.

Published Date: 2018-08-17 Language: English File Size: 122.13MB
Operating System: Windows 7/8/10/Server

New Feature/Enhancement:

1.Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2.Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3.Support EAP firmware online upgrade function.

4.Support configuration/data files auto backup function.

5.Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information of a specific time.

6.Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (If you are using External RADIUS Server Portal function with External Web Portal)

7.Batch Upgrade function now will only take effect to EAP which belong to the current site.

8.UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function.

9.Various known bug fixes.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Published Date: 2018-08-17 Language: English File Size: 126.04MB
Operating System: Windows 7/8/10/Server

New Feature/Enhancement:

1.Support Cloud Access function which allows you to manage Omada Controller remotely conveniently.

2.Support Omada APP management method. (You can manage Omada Controller with Omada APP)

3.Support EAP firmware online upgrade function.

4.Support configuration/data files auto backup function.

5.Improve the Backup & Restore function, backup files can contain configuration only or both configuration and database information of a specific time.

6.Add AP MAC, SSID parameters in the External Web Portal URL which is distributed from controller to client. (If you are using External RADIUS Server Portal function with External Web Portal)

7.Batch Upgrade function now will only take effect to EAP which belong to the current site.

8.UI Optimization. Rearranged the configuration options in Site Settings list (only take effect to current site) or Controller Settings list (take effect to all sites) according to the actual function.

9.Various known bug fixes.

 

Notes:

1. To use Omada Controller 3.0.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 3.0.X from 2.4.X or earlier version.

Published Date: 2018-07-24 Language: English File Size: 117.46MB
Operating System: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add support for Mesh networking which allows you to deploy EAP wirelessly.

2. Add support for Fast Roaming (802.11 k/v) which can improve user experience when roaming between the EAPs.

3. Add "Managed by others" status for the EAP managed by other Omada Controller before in Pending list.

4. Add username/password verification when forget and readopt disconnected EAPs.

5. Change the name of EAP Discover Utility to "Omada Discover Utility".

6. Optimize the SSID Override feature in EAP private configuration page.

7. Add icons for sea wave ceiling AP, wall-plate AP and Outdoor AP.

8. Enhance the security of sensitive information like Operator Password, Twilio AuthToken, Radius Password, etc.

 

Bug Fixes:

1. Fix the bug that the database volume grows too fast.

2. Fix the bug that EAP can't be managed immediately after reboot.

3. Fix the bug that the number of wireless clients on the Omada Controller page is inconsistent.

 

Note:

1. To use Omada Controller 2.7.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.7.X from 2.4.X or earlier version.

Published Date: 2018-07-24 Language: English File Size: 121.37MB
Operating System: Windows 7/8/10/Server

New Feature/Enhancement:

1. Add support for Mesh networking which allows you to deploy EAP wirelessly.

2. Add support for Fast Roaming (802.11 k/v) which can improve user experience when roaming between the EAPs.

3. Add "Managed by others" status for the EAP managed by other Omada Controller before in Pending list.

4. Add username/password verification when forget and readopt disconnected EAPs.

5. Change the name of EAP Discover Utility to "Omada Discover Utility".

6. Optimize the SSID Override feature in EAP private configuration page.

7. Add icons for sea wave ceiling AP, wall-plate AP and Outdoor AP.

8. Enhance the security of sensitive information like Operator Password, Twilio AuthToken, Radius Password, etc.

 

Bug Fixes:

1. Fix the bug that the database volume grows too fast.

2. Fix the bug that EAP can't be managed immediately after reboot.

3. Fix the bug that the number of wireless clients on the Omada Controller page is inconsistent.

 

Note:

1. To use Omada Controller 2.7.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT be able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.7.X from 2.4.X or earlier version.

Published Date: 2018-04-13 Language: English File Size: 104.59MB
Operating System: Windows 7/8/10/Server

New Features/Improvements:

1.Safety performance optimization.

2.Web UI optimization.

3.Optimized the format requirement and handling mechanism for Local User Account importing files.

Bug Fixed:

1.Fixed the bug that clients may lose the authorized status in the next ten minutes, after passing the Facebook Portal authentication.

2.Fixed the bug that customer can add port number except for port 1024~65535, if customer has already added http/https prefix in the URL of Free Authentication Policy.

3.Fixed the bug that Controller will still adopt the EAP, after skipping the Select Devices process in the quick setup wizard of Omada Controller.

Notes:

1. To use Omada Controller 2.6.x new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.6.X from 2.4.X or earlier version.

Published Date: 2018-02-28 Language: English File Size: 104.73MB
Operating System: Windows 7/8/10/Server

New Features/Improvements:

1. Supports rate limit function for a single client. (If you have set SSID, Client, Voucher rate limit together, the minimum limit value will take effect.)

2. RSSI (Received Signal Strength Indication) of clients will be displayed in the clients list of Omada Controller.

3. Added Historical Data Retention function to clean history and cache files of Omada Controller periodically.

4, Improved the Portal Authentication mechanism. Users who didn’t pass the authentication cannot access local network.

5. HTTPS now supports the redirection of portal authentication page.

6. Facebook Portal now intercepts HTTPS access unless you pass the authentication.

7. Added Daily Limit function to No Authentication portal. After authentication times out, users cannot get authenticated again in one day.

8. Supports single and bulk printing of Voucher code.

9. Omada Controller will create Free Authentication Policy automatically when the External Web Portal Server or External Portal Server is configured.

10. Increased the synchronization update process on Omada Controller when the IP address of EAP is changed.

11. Added error messages that port is already occupied or another Controller is already running in the subnet when starting the Omada Controller.

12. Changed the name of EAP Controller to Omada Controller

Bug Fixed:

1. Added Term of Use function back in portal authentication page.

2. Fix the bug that cannot add Background Picture or Logo Picture in Portal login page when image size is less than 2MB.

3. Fix the bug that the Top-Level Domain of e-mail address cannot exceed 4 English characters.

4. Fix the bug that set Facebook Portal authentication failed when using Firefox browser with private mode and tracking protection function enabled.

5. Fix the bug that cannot login the portal authentication page after changing the default HTTP port (8088) of Omada Controller (you also need to upgrade the corresponding firmware of EAP which fixed this bug).

6. Fix the bug that cannot search the AP name with a blank in the Access Points and Clients list of Omada Controller.

Notes:

1. To use Omada Controller 2.6.x added new features, you need to upgrade your EAP's firmware to the corresponding version.

2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.

3. Portal configuration will be lost after upgraded to Omada Controller 2.6.X from 2.4.X or earlier version.

Published Date: 2018-02-01 Language: English File Size: 109.2MB
Operating System: Linux

New Features/Improvements:
1. Add Facebook, SMS and Local User Authentication as Portal Authentication methods.
2. Support for multiple portal policies configured in Omada Controller.
3. Support for more customized portal page, the network administrator can add advertisement on the portal pages now.
4. Add speed and traffic limit based on Voucher.
5. Support for black/white list import.
6. Support configuring DNS on Static IP mode.
7. External Portal URL supports subdirectory, for example https://portal.demo.com/1.
8. Radius password supports special characters.

Notes:

1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.
4. Supporting 64-bit Linux operating system, including Ubuntu 14.04/16.04/17.04, CentOS 6.x/7.x and Fedora 20 or above.
5. Require JRE 1.7 Java environment.

Published Date: 2018-01-05 Language: English File Size: 113.15MB
Operating System: Windows 7/8/10/Server

New Features/Improvements:
User Interface improvements
Bug Fixed:
1. Fix: COMODO security software will cause Initialization failure of the Omada Controller
2. Fix: Logo picture with transparent background will become black when uploaded in portal login page.

Notes:

1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

Published Date: 2017-12-07 Language: English File Size: 109.2MB
Operating System: Windows 7/8/10/Server

New Features/Improvements:
1. Add Facebook, SMS and Local User Authentication as Portal Authentication methods.
2. Support for multiple portal policies configured in Omada Controller.
3. Support for more customized portal page, the network administrator can add advertisement on the portal pages now.
4. Add speed and traffic limit based on Voucher.
5. Support for black/white list import.
6. Support configuring DNS on Static IP mode.
7. External Portal URL supports subdirectory, for example https://portal.demo.com/1.
8. Radius password supports special characters.

Notes:
1. To use Omada Controller 2.5.x added new features, you need to upgrade your EAP's firmware to the corresponding version.
2. Once upgraded to this version of Omada Controller, you will NOT able to downgrade to an earlier version.
3. Portal configuration will be lost after upgraded to Controller 2.5.X from 2.4.X or earlier version.

Published Date: 2017-08-15 Language: English File Size: 103.5MB
Operating System: Windows 7/8/10/ server

Modifications and Bug Fixes:

New Features/Enhancement:
1. Display hardware version on the AP list.
2. Optimize AP adopting mechanism. 
3. Support upgrading firmware in batch based on hardware version.

Published Date: 2017-07-18 Language: English File Size: 82.22MB
Operating System: Linux

Modifications and Bug Fixes:

New Features/Enhancement:
1. Display hardware version on the AP list.
2. Optimize AP adopting mechanism. 
3. Support upgrading firmware in batch based on hardware version.
4. Support starting up the EAP Controller service with system booting.

Notes:

1. Support Linux X64 OS, including Ubuntu 16.04/17.04, CentOS 7.2/7.3, Fedora 24/25.
2. Require JRE 1.7 Java environment.

Published Date: 2017-03-31 Language: English File Size: 94.63 MB
Operating System: WinXP/Vista/7/8/8.1/10/Server2008 (32/64bit)/Server2012 (64bit)

Modifications and Bug Fixes:

1. Add management VLAN function but requires your EAP with corresponding firmware which support management VLAN.
2. Add SSH function that could choose to enable SSH for EAP or not.

Notes:

1. Please change the Region Code to Germany/United States (Germany for EU firmware & United States for US firmware) on the System --> Region Code page before you upgrade the EAP Controller to 2.4.x from 2.3.x or earlier version.
2.For EAP with EU/US firmware.
3.If you use EAP UN firmware, it would remind you to upgrade to the EU/US firmware.

EAP Discovery Tool

The EAP Discovery Tool can help the EAP Controller to adopt the EAP in L3 Network, and you can also use the EAP Discovery Tool to find the EAP’s IP address.

Published Date: 2018-07-24 Language: English File Size: 84.16 MB
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11

New Feature/Enhancement:
1. Change name to "Omada Discovery Utility".
2. Update background picture during installation.
3. Limit the maximum length of controller hostname to 79.
 
Bug Fixed:
Fix the bug that searching in the search box will cause the software to hang.
 
Note:
Operating System: Mac OS X 10.7/10.8/10.9/10.10/10.11.

Published Date: 2018-01-05 Language: English File Size: 3.39MB
Operating System: WinXP/Vista/7/8/8.1/10/Server2008/Server2012

Apps

Omada APP

TP-Link Omada lets you configure settings, monitor network status and manage clients, all from the convenience of a smart phone or tablet. Learn more about Compatible Devices.

Note: To use Omada, please update your EAP's firmware to the latest version.

Emulators

Firmware Version
Working Mode
Language
180514(EU)
-
English
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: