How to Configure the Repeater Mode on the TL-MR3020 and TL-MR3040

 

 

 
Definition:The TL-MR3020/MR3040 copies and reinforces the existing wireless signal to extend the coverage of the signal. So the network name(SSID) and password don't change. This mode is especially useful for a large space to eliminate signal-blind corners.
Application: Large house,office,warehouse or other spaces where the existing signal is weak.
 
Access web interface
       Please refer to this FAQ to log into the web interface of TL-MR3020.
       Please refer to this FAQ to log into the web interface of TL-MR3040.
  
Run Quick Setup
 
Go to Quick Setup-> Click Next
 
Select Repeater-> Click Next
 
Select the Region,click Survey
 
Locate your router network name under the SSID column -> Click Connect
 
Security Settings: (Please match Security Settings with your existing router)
Please refer to Original Equipment Manufacturer for details
Password:  (Please match Security Password with your existing router)
Click: Next
 
Click Reboot, and wait until it goes to 100% percent.
 
Relocate the TL-MR3020/TL-MR3040
 
You may now relocate the TL-MR3020/TL-MR3040 to a centralized location in order to make the most of Repeater Mode.
Congratulations! Your wireless signal has been enhanced.
 
 
Computer Setup Reversion
After the configuration, we need change the TCP/IP settings back on the computer. 
 Please refer to the last section of this FAQ for TL-MR3020.
Please refer to the last section of this FAQ for TL-MR3040. 
If it doesn't work, please feel free to contact us(support@tp-link.com).
 

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.    

This Article Suits for:
TL-MR3020 , TL-MR3040
User Application Requirement | Updated 05-25-2016 05:51:47 AM