How to configure system time of TL-WR902AC (standard wireless router/hotspot router mode)? (new logo)

Time Settings is only available when the TL-WR902AC is on standard wireless router/access point/range extender/hotspot router mode. Before we start, please make sure it’s configured successfully, otherwise, click the corresponding mode below for internet setup instruction.

Standard Router

Hotspot Router

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.

2. Go to System Tools > Time Settings and configure the system time as needed.

To set time manually:

1. Select your local time zone.

2. Enter the Date in Month/Day/Year format.

3. Enter the Time in Hour/Minute/Second format.

4. Click Save.

To set time automatically:

1. Select your local time zone.

2. Enter the address or domain of the NTP Server I or NTP Server II.

3. Click Get GMT to get time from the internet if you have connected to the internet.

To set Daylight Saving Time:

1. Select Enable Daylight Saving.

2. Select the start time from the drop-down list in the Start field.

3. Select the end time from the drop-down list in the End field.

4. Click Save.

Note: This setting will be used for some time-based functions such as firewall. You must specify your time zone once you log in to the router successfully; otherwise, time-based functions will not take effect.

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

O artigo aplica-se a:
TL-WR902AC( V3 )
Configuration Guide | Updated 12-28-2017 06:26:16 AM