Firmware

A firmware update can resolve issues that the previous firmware version may have and improve its current performance.

To Upgrade

IMPORTANT: To prevent upgrade failures, please read the following before proceeding with the upgrade process

  •  Please upgrade firmware from the local TP-Link official website of the purchase location for your TP-Link device, otherwise it will be against the warranty. Please click here to change site if necessary.
  • Please verify the hardware version of your device for the firmware version. Wrong firmware upgrade may damage your device and void the warranty. ( Normally V1.x=V1)
    How to find the hardware version on a TP-Link device?
  • Do NOT turn off the power during the upgrade process, as it may cause permanent damage to the product.
  • Do NOT upgrade the firmware through wireless connection unless there is no LAN/Ethernet port on the TP-link device. For LTE-MiFi, it is recommended to upgrade via USB port.
  • It's recommended that users stop all Internet applications on the computer, or simply disconnect Internet line from the device before the upgrade.
  • Use decompression software such as WinZIP or WinRAR to extract the file you download before the upgrade.
TL-SG2008_V1_150624
Published Date: 2015-06-24 Language: English File Size: 3.37 MB
Modifications and Bug Fixes

New Features/Enhancement:
1.Improved security level.
2.Added the switch to select SSL versions,including SSL3.0 and TLS1.0.
3.Added the switch for telnet,http,https.Http and https interfaces can not be shutdown simultaneously.
4.Added the switch for encryption algorithms of SSH and SSL.
5.Configuration by different management interfaces are divided by TCP port independently.
6.Fixed the bug that the last number port PVID can not be modified.
7.Added rrcp CLI command
8.Optimized Loopback detection feature

Notes

1. For TL-SG2008 V1.
2. Your device’s configuration WILL be lost after upgrading.

TL-SG2008_V1_150203
Published Date: 2015-02-03 Language: English File Size: 3.33 MB
Modifications and Bug Fixes
New Features/Enhancement:
1.Added Network Security feature, including IP-MAC Binding and 802.1X, etc.
2.Added the command "access-list" in the interface range configuration mode (config-if-range).
3. Enriched sub-nodes of dot1dTp and dot1qTp so that dot1dTpFdbTable and dot1qTpFdbTable are supported now.
4. Improved CLI commands and configuration file so that the password saved in the configuration file can be encrypted now.
5. Improved Traffic Monitor feature so that values bigger than 2^32 are supported now.
6. Optimized the naming principles for device description, VLAN name and port description so that space/blank is allowed now.
7. Optimized Loopback Detection feature.
Bug Fixed:
1.Solved LACP compatibility problems with Free NAS and Marvell Network Control Utility for Aggregation and VLANs.
2.Fixed the bug that after working for about 10 days, a problem with high CPU occupied and inaccessible web interface comes out within a short period.
3.Fixed the bug on MAC ACL that if ending with "deny all", a rule in higher priority may fail.
4. Fixed the bug that some sub-nodes under interface node (OID: 1.3.6.1.2.1.2) never return a non-zero value.
5. Fixed the bug on DHCP Filtering/Snooping that replies from the DHCP server will be blocked if there isn't a DHCP discovery before the DHCP request. 
6.Since DHCP Snooping feature is added (under IP-MAC Binding) in this firmware, DHCP Filtering feature is removed. 
Notes
1. For TL-SG2008 V1
2. Since we have added DHCP Snooping feature and deleted DHCP Filtering feature in this firmware, your configs about DHCP Filtering will be lost after upgrading, you may need to configure DHCP Snooping manually. Other configs will be reserved after upgrading.
3.After upgrading to this firmware, it is not allowed to downgrade to an ealier one.
 
 
TL-SG2008_V1_140626
Published Date: 2014-06-26 Language: English File Size: 3.31 MB
Modifications and Bug Fixes
  1. Improved stability of the system.
Notes
For TL-SG2008 V1

To Use Third Party Firmware In TP-Link Products

Some official firmware of TP-Link products can be replaced by the third party firmware such as DD-WRT. TP-Link is not obligated to provide any maintenance or support for it, and does not guarantee the performance and stability of third party firmware. Damage to the product as a result of using third party firmware will void the product's warranty.

Open Source Code For Programmers (GPL)

Please note: The products of TP-Link partly contain software code developed by third parties, including software code subject to the GNU General Public Licence (“GPL“), Version 1/Version 2/Version 3 or GNU Lesser General Public License ("LGPL"). You may use the respective software condition to following the GPL licence terms.

You can review, print and download the respective GPL licence terms here. You receive the GPL source codes of the respective software used in TP-Link products for direct download and further information, including a list of TP-Link software that contain GPL software code under GPL Code Center.

The respective programs are distributed WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the respective GNU General Public License for more details.

802.1X Client

Published Date
2017-08-17
Language
English
File Size
5.5MB
Operating System
Win2000/XP/2003/Vista/7/8/8.1/10

MIBs Files

Published Date
2015-02-03
Language
English
File Size
78 KB
Operating System
WinXP/2003/Vista/7/8/Mac/Linux
Notes
For TL-SG2008 V1 150203 and subsequent versions 
Published Date
2014-01-28
Language
English
File Size
66 KB
Operating System
Win2000/XP/2003/Vista/7/8/Mac/Linux
Notes
For TL-SG2008 V1 140126 and subsequent versions
T2700G-28TQ License Download
License Model: T2700G-28TQ-L1000

Find your product MAC and Serial Number.
License Key:
Product Serial Number:
Product MAC:
Checking code: