How to bind IP&MAC address on High Power Wireless N Router? (Router mode--new logo)

IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind network device’s IP address to its MAC address. This will prevent ARP Spoofing and other ARP attacks by denying network access to a device with matching IP address in the Binding list, but unrecognized MAC address.

Here we take TL-WR941HP for demonstration.

1. This feature is only available when the router is set to Router mode. Please make sure you have configured the router correctly according to the instructions below.

How to configure Router Mode of High Power Wireless N Router? (new logo)

2. Go to Advanced > Security > IP & MAC Binding.

3. Enable ARP Binding.

4. Bind your device(s) according to your need.

To bind the connected device(s):

Click to add the corresponding device to the Binding List.

To bind the unconnected device

1) Click Add in the Binding List section.

 

2) Enter the MAC address and IP address that you want to bind. Enter a Description for this binding entry.

3) Tick the Enable This Entry checkbox and click OK.

Done! Now you don’t need to worry about ARP spoofing and ARP attacks!

Get to know more details of each function and configuration please go to Download Center to download the manual of your product.

This Article Applies to:
TL-WR941HP( V2 )
Configuration Guide | Updated 09-21-2017 07:10:54 AM