JetStream 16-Port Gigabit L2 Managed Switch with 2 SFP Slots T2600G-18TS
- 16 Gigabit RJ45 Ports and 2 Gigabit SFP Slots
- Selectable RJ45 or Micro-USB Console Port
- L2+ feature——Static Routing, helps route internal traffic for more efficient use of network resources
- IP-MAC-Port-VID Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X Authentication and Radius provide you with robust security strategies
- L2/L3/L4 QoS and IGMP snooping that optimize voice and video application
- DDM provides monitoring of all SFP Modules inserted to the switch
- IPv6 supported with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery
- Web, CLI (Console Port, Telnet, SSH), SNMP, RMON and Dual Image bring abundant management policies
What This Product Does
TP-Link JetStream Gigabit L2 managed switch T2600G-18TS provides 16 10/100/1000Mbps ports and 2 Gigabit SFP Slots. The switch provides high performance, powerful L2 and L2+ features like static routing, enterprise-level QoS and other advanced security strategies. The IP-MAC-Port Binding and Access Control List (ACL) functions protect against broadcast storm, ARP and Denial-of-Service (DoS) attacks, etc. Quality of Service (QoS, L2 to L4) provides enhanced traffic management capabilities to move your data smoother and faster. Moreover, the easy-to-use web management interfaces, along with CLI, SNMP, RMON and Dual Image mean faster setup and configuration with less downtime. For workgroup and departments requiring cost-sensitive L2 Switch and gigabit capability, TP-Link JetStream 16-Port Gigabit L2 managed Switch T2600G-18TS provides you the ideal network solution.
Secure NetworkingThe T2600G-18TS provides IP-MAC-Port Binding, Port Security, Storm control and DHCP Snooping which protect against broadcast storms, ARP attacks, etc. It integrates some typical DoS attacks to select. You can protect these attacks more easily ever than before. In addition, the Access Control Lists (ACL, L2 to L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports and even VLAN ID. Moreover, the switch supports 802.1X authentication, which is used in conjunction with a RADIUS server to require some authentication information before access to the network is allowed. Guest VLAN function supports to enable the non-802.1X clients to access the specific network resource.
Abundant L2 and L2+ featuresT2600G-18TS supports a complete lineup of L2 features, including 802.1Q tag VLAN, Port Mirroring, STP/RSTP/MSTP, Link Aggregation Control Protocol and 802.3x Flow Control function. Any more, the switch provides advanced features for network maintenance. Such as Loopback Detection, Cable Diagnostics and IGMP Snooping. IGMP snooping ensures the switch intelligently forward the multicast stream only to the appropriate subscribers while IGMP throttling & filtering restrict each subscriber on a port level to prevent unauthorized multicast access. Moreover, T2600G-18TS supports L2+ feature—static routing, which is a simple way to provide segmentation of the network with internal routing through the switch and helps network traffic for more efficient use.
IPv6 SupportT2600G-18TS supports various IPv6 functions such as Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 Interface, Path Maximum Transmission Unit (PMTU) Discovery and IPv6 Neighbor Discovery, which guarantees your network is ready for the Next Generation Network (NGN) without upgrading your network equipment.
DDMThe T2600G-18TS provides DDM (Digital Diagnostic Monitoring) function to view the status of SFP modules inserting to the Switch and to configure alarm settings, warning settings, temperature threshold settings, voltage threshold settings, bias current threshold settings, TX power threshold settings, and Rx power threshold settings.
Enterprise Level Management Features
T2600G-18TS is easy to use and manage. It supports various user-friendly standard management features, such as intuitive web-based Graphical User Interface (GUI) or industry-standard Command Line Interface (CLI), either administration traffic can be protected through SSL or SSH encryptions. SNMP (v1/v2c/v3) and RMON support enables the switch to be polled for valuable status information and send traps on abnormal events.
|Standards and Protocols||
|Interface||16 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX)2 100/1000Mbps SFP Slots1 RJ45 Console Port1 Micro-USB Console Port|
|Network Media||10BASE-T: UTP category 3, 4, 5 cable (maximum 100m)100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m)100BASE-FX: MMF, SMF1000BASE-X: MMF, SMF|
|Power Supply||100~240VAC, 50/60Hz|
|Dimensions ( W x D x H )||
17.3 x 8.7 x 1.7 in.
(440 x 220 x 44 mm)
|Max Power Consumption||11.5W|
|Max Heat Dissipation||39 BTU/h|
|Packet Forwarding Rate||26.78Mpps|
|MAC Address Table||8k|
|Jumbo Frame||9216 Bytes|
|Quality of Service||Support 802.1p CoS/DSCP prioritySupport 8 priority queuesQueue scheduling: SP, WRR, SP+WRRPort/Flow- based Rate LimitingVoice VLAN|
|L2 and L2+ Features||Static RoutingDHCP RelayIGMP Snooping V1/V2/V3802.3ad LACP (Up to 8 aggregation groups, containing 8 ports per group)STP/RSTP/MSTPBPDU Filtering/GuardTC/Root ProtectLoopback detection802.3x Flow ControlL2PT|
|VLAN||Supports up to 4K VLANs simultaneously (out of 4K VLAN IDs)802.1Q/MAC/Protocol-based VLAN GARP/GVRP|
|Access Control List||L2~L4 package filtering based on source and destination MAC address, IP address, TCP/UDP ports, 802.1p,DSCP, protocol and VLAN IDTime Range Based ACL|
|Security||IP-MAC-Port BindingAAA802.1x and Radius AuthenticationDoS DefendDynamic ARP Inspection (DAI)SSH v1/v2SSL v3/TLSv1Port SecurityBroadcast/Multicast/Unknown-unicast Storm Control|
|IPv6||Dual IPv4/IPv6 stackMulticast Listener Discovery (MLD) SnoopingIPv6 neighbor discovery (ND)Path maximum transmission unit (MTU) discoveryInternet Control Message Protocol (ICMP) version 6TCPv6/UDPv6IPv6 ACLDHCPv6 SnoopingIPv6 Interface|
|IPv6 Applications||DHCPv6 ClientPing6Tracert6 Telnet(v6) IPv6 SNMP IPv6 SSH IPv6 SSL Http/Https IPv6 TFTPIPv6 ACLIPv6 InterfaceIPv6 RoutingDHCPv6 RelayDHCPv6 Snooping|
|Management||Web-based GUI and CLI managementSNMP v1/v2c/v3,compatible with public MIBs and TP-Link private MIBsRMON (1, 2, 3, 9 groups)PPPoE Circuit IDDHCP RelayDHCP ServerDHCP/BOOTP Client, DHCP Snooping, DHCP Option82 Dual ImageCPU MonitoringPort MirroringDDMTime Setting: SNTPIntegrated NDP/NTDP featureFirmware Upgrade: TFTP & WebSystem Diagnose: VCTSYSLOG & Public MIBSPassword Recovery|
|Certification||CE, FCC, RoHS|
|Package Contents||SwitchPower CordQuick Installation GuideResource CDRackmount KitRubber Feet|
|System Requirements||Microsoft® Windows® XP, Vista™, 7, 8, 10, MAC® OS, NetWare®, UNIX® or Linux.|
|Environment||Operating Temperature: 0℃~40℃ (32℉~104℉);Storage Temperature: -40℃~70℃ (-40℉~158℉)Operating Humidity: 10%~90% non-condensingStorage Humidity: 5%~90% non-condensing|